Celebrating the
independent kiwi spirit of invention.
Please note that the date mentioned below that the database code was last updated is not the date the data itself was last updated.
Driver List |
|
|
|
Drivers not yet
added |
|
Why use a driver? |
|
Driver types overview |
LED Driver List – all LED drivers
An O-ring, Tailcap & Silicone Grease List is also available.
Video Foundry/Aqualab does not sell any of these drivers. Links are provided to resellers. The short URL for this list is www.videofoundry.co.nz/driverlist. See the bottom of the page for my email address. If you're just a spam bot looking for fodder, spam the hell out of these spammers' addresses: spammer address 1, spammer address 2, spammer address 3. They deserve a taste of their own spam.
Note that some sellers are more reliable than others. Inclusion of particular resellers in this list is not an endorsement of them as businesses. Note that Fasttech closed in December 2022 but the drivers are still included for reference.
Jump to: Footnotes & Instructions | AMC7135 notes | PT4105 notes | Schottky diodes.
1364 drivers found. Listed by driver name.
|
Price
(US$) |
Driver Type Driver Purpose |
Vin
min-max (DC except where noted) |
Number
of LEDs (or LED dice) in series min-max |
Battery Suitability | Efficiency min-max |
Output Current Max current (with just a resistor modification) |
Number of Modes | Size (diameter except where noted) |
Notes | |
"10W" MR16 driver |
FastTech $1.61 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 3 | 12 V AC or DC | 650 mA |
1 | 17 mm x 13 mm x 10 mm | Driver chip MT7201. One of the threads highlights some inconsistency with the input and output figures - buyer beware. | |
(1-3)*2W MR16 driver |
FastTech $1.48 |
MR16 (buck) driver | 12-17 V DC; also works with AC | 1-3 | 12 V AC or DC | 600 mA |
1 | 29 mm x 18 mm x 10 mm | Output voltage 9-11 V. | |
(1-3)x1W dimmable mains driver |
DealExtreme $7.56 for 5 |
Mains bulb driver | 110-120 V AC | 1-3 | 115 V AC mains power | 95% | 300 mA |
1 | 25 mm x 18 mm x 10 mm | Output voltage 3-10 V. Dimmable. |
(1-3)x1W mains driver |
FastTech $1.38 |
Mains bulb driver | 85-277 V AC | 1-3 | 115Â V, 230Â V AC mains power | 90% | 300 mA |
1 | 26 mm x 15 mm x 15 mm | Output voltage 3-11 V. |
(1-3)x1W mains driver |
DealExtreme $2.66 |
Mains driver | 85-265 V AC | 1-3 | 115Â V, 230Â V AC mains power | 85% | 300 mA |
1 | 240 mm x 32 mm x 24 mm | Output voltage 6-12 V. Output short circuit protection. Stated length probably includes the wires. |
(1-3)x1W mains driver |
DealExtreme $2.39 |
Mains driver | 100-240 V AC | 1-3 | 115Â V, 230Â V AC mains power | 280 mA |
1 | 70 mm x 32 mm x 23 mm | Output voltage 2-12 V. | |
(1-3)x5W MR16 driver |
Focalprice $5.51 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1-3 | 88% | 960 mA |
1 | 70 mm x 18 mm x 15 mm | Efficiency is manufacturer claimed maximum, typical efficiency unknown. The stated length probably includes the LED leads. Duh. | |
(10-18)x1W mains driver |
DealExtreme $7.00 |
Mains driver | 85-277 V AC | 10-18 | 115 V or 230 V AC mains power | 88% | 300 mA |
1 | 52 mm x 21 mm x 19 mm | Output voltage 30-60 V. Note that this voltage represents a shock hazard - use with caution. |
(11-18)x1W mains driver |
DealExtreme $5.20 |
Mains bulb driver | 85-277 V AC | 11-18 | 115 V or 230 V AC mains power | 95% | 300 mA |
1 | 60 mm x 25 mm x 15 mm | Output voltage 33-60 V. Note that this voltage represents a shock hazard - use with caution. |
(12-18)x1W mains driver |
DealExtreme $7.40 |
Mains driver | 85-265 V AC | 12-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 98 mm x 30 mm x 20 mm | Output voltage 36-64 V. IP67 dust/water rating. Note that this voltage represents a shock hazard - use with caution. Over current, over loading and short circuit protection. | |
(12-18)x1W mains driver |
FastTech $3.14 |
Mains bulb driver | 85-277 V AC | 12-18 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 50 mm x 20 mm x 20 mm | Output voltage 36-63 V. Note that this voltage represents a shock hazard - use with caution. |
(13-17)x3W mains driver |
FastTech $16.36 |
Mains driver | 100-240 V AC | 13-17 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 180 mm x 37 mm x 28 mm | Output current from photo; the "current draw" figure is nonsense. Output voltage 34-54 V. Note that this voltage represents a shock hazard - use with caution. | |
(18-25)x1W mains driver |
DealExtreme $8.10 |
Mains bulb driver | 100-265 V AC | 18-25 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 71 mm x 26 mm x 17 mm | The initial confusion between power and voltage seems to have been sorted out - output voltage 54-90 V. Note that this voltage represents a shock hazard - use with caution. Claimed to be suitable for LED light bulbs but it's really rather big for that. |
(18-36)x1W mains driver |
FastTech $6.77 |
Mains driver | 85-277 V AC | 18-36 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 85 mm x 28 mm x 25 mm | Output voltage 50-120 V. Note that this voltage represents a shock hazard - use with caution. |
(18-36)x1W mains driver |
FastTech $8.12 |
Mains driver | 85-277 V AC | 18-36 | 115 V or 230 V AC mains power | 80% | 300 mA |
1 | 115 mm x 45 mm x 28 mm | Output voltage 54-12 V. Note that this voltage represents a shock hazard - use with caution. |
(18-36)x1W mains driver |
FastTech $11.67 |
Mains driver | 85-277 V AC | 18-36 | 115 V or 230 V AC mains power | 80% | 300 mA |
1 | 102 mm x 37 mm x 29 mm | Output voltage 54-120 V. Note that this voltage represents a shock hazard - use with caution. |
(2-3)x3 W |
goodluckbuy.com $4.91 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 650 mA |
1 | 58 mm x 26 mm x 22 mm | Product removed from retailer's site. Output voltage 10-12 V (which contradicts the claimed working range of 2-3 LEDs). |
|
(2-6)x3W mains driver |
DealExtreme $7.79 |
Mains driver | 110-265 V AC | 2-6 | 115 V or 230 V AC mains power | 600 mA |
1 | 83 mm x 30 mm x 20 mm | Output voltage 8-24 V. IP66 dust/water rating. | |
(20-24)x3W mains driver |
FastTech $24.02 |
Mains driver | 100-240 V AC | 20-24 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 231 mm x 42 mm x 32 mm | Output current from photo; the "current draw" figure is nonsense. Output voltage 48-77 V. Note that this voltage represents a shock hazard - use with caution. | |
(3-5)x1W mains driver |
DealExtreme $2.46 |
Mains driver | 100-240 V AC | 3-5 | 115Â V, 230Â V AC mains power | 280 mA |
1 | 70 mm x 32 mm x 23 mm | Output voltage 8-18 V. | |
(4-5) x 1W mains driver |
Focalprice $2.69 |
Mains driver | 85-265 V AC | 4-6 | 115 V or 230 V AC mains power | 88% | 280 mA |
1 | 130 mm x 16 mm x 13 mm | Output voltage 12-18 V. Efficiency is claimed minimum. The stated length probably includes the LED leads. Duh. |
(4-5) x 2W mains driver |
Focalprice $3.59 |
Mains bulb driver | 85-265 V AC | 4-5 | 115Â V, 230Â V AC mains power | 88% | 450 mA |
1 | 18 mm x 16 mm x 16 mm | Output voltage 12-20 V. Efficiency is manufacturer claimed maximum, typical efficiency unknown. |
(4-5)x1W mains driver |
DealExtreme $4.00 |
Mains driver | 85-277 V AC | 3-5 | 115 V or 230 V AC mains power | 80% | 300 mA |
1 | 52 mm x 27 mm x 22 mm | Output voltage 6-18 V. |
(4-5)x1W mains driver |
FastTech $1.56 |
Mains bulb driver | 85-277 V AC | 4-5 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 26 mm x 15 mm x 15 mm | Output voltage 15-17 V. |
(4-5)x1W mains driver |
FastTech $2.05 |
Mains driver | 85-277 V AC | 4-5 | 115 V or 230 V AC mains power | 300 mA |
1 | 88 mm x 39 mm x 25 mm | Output voltage 12-18 V. | |
(4-6)x2W mains driver |
DealExtreme $5.40 |
Mains bulb driver | 100-265 V AC | 4-6 | 115 V or 230 V AC mains power | 90% | 600 mA |
1 | 54 mm x 21 mm x 15 mm | Output voltage assumed to be 12-20 V. Claimed to be suitable for LED light bulbs; you'd need a long one. |
(4-7)x1W mains driver |
DealExtreme $3.40 |
Mains bulb driver | 85-265 V AC | 4-7 | 115 V or 230 V AC mains power | 330 mA |
1 | 30 mm x 15 mm x 12 mm | Output voltage 14-25 V. Said to be compatible with PAR20 bulb. | |
(4-7)x1W mains driver |
DealExtreme $3.99 |
Mains bulb driver | 85-277 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 30 mm x 1.7 mm x 1.7 mm | Output voltage 14-25 V. | |
(4-7)x1W mains driver |
DealExtreme $6.75 |
Mains driver | 110-265 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 77 mm x 30 mm x 20 mm | Output voltage 14-28 V. IP66 dust/water rating. | |
(4-7)x1W mains driver |
FastTech $1.88 |
Mains bulb driver | 85-277 V AC | 4-7 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 30 mm x 17 mm x 17 mm | Output voltage 12-25 V. |
(4-7)x1W mains driver |
FastTech $2.48 |
Mains driver | 85-277 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 88 mm x 39 mm x 25 mm | Output voltage 12-25 V. | |
(4-7)x1W mains driver |
DealExtreme $2.66 |
Mains driver | 100-260 V AC | 4-7 | 115Â V, 230Â V AC mains power | 280 mA |
1 | 70 mm x 32 mm x 23 mm | Output voltage 12-28 V. | |
(4-7)x1W mains driver, grey case |
DealExtreme $21.40 |
Mains driver | 85-265 V AC | 4-7
7 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | Output voltage 12-25 V. IP66 dust/water rating. 7 cool white LEDs included (in an aluminium downlight). |
||
(4-7)x1W MR16 driver |
FastTech $2.29 |
MR16 (boost) driver | 12-12 V DC; also works with AC | 4-7 | 12 V AC or DC | 82-91% | 330 mA |
1 | 24 mm x 19 mm x 12 mm | Output current is a guess. Input/output inconsistencies - buyer beware. Is it a boost driver or a buck/boost driver? One user claims it uses the XL6001 driver chip (datasheet - not presently linked from their web site), which offers PWM dimming. Efficiency figures from that datasheet. |
(4-7)x1W MR16 driver |
DealExtreme $2.72 |
MR16 (boost) driver | 12-17 V DC; also works with AC | 4-7 | 12 V AC or DC | 300 mA |
1 | 37 mm x 19 mm x 12 mm | Output voltage 12-23 V. Apparently a boost driver, so it might not work well with 4 LEDs if running on 12 V AC. | |
(4-9)x1W boost driver |
DealExtreme $6.87 for 3 |
MR16 (boost) driver | 12-17 V DC; also works with AC | 4-9 | 12 V AC/DC | 300 mA |
1 | 28 mm x 18 mm x 11 mm | Output voltage 12-30 V. | |
(5-15)x1W dimmable mains driver |
DealExtreme $5.96 |
Mains bulb driver | 85-265 V AC | 5-15 | 115 V or 230 V AC mains power | 95% | 300 mA |
1 | 40 mm x 17 mm x 16 mm | Output voltage 15-55 V. Dimmable. |
(5-7)x1W dimmable mains driver |
DealExtreme $5.24 |
Mains bulb driver | 110-120 V AC | 5-7 | 115 V AC mains power | 95% | 300 mA |
1 | 33 mm x 20 mm x 12 mm | Output voltage 15-25 V. Dimmable. |
(5-7)x1W dimmable mains driver |
DealExtreme $7.61 for 2 |
Mains driver | 100-265 V AC | 5-7 | 115Â V, 230Â V AC mains power | 80% | 300 mA |
1 | 66 mm x 33 mm x 21 mm | Claims to be dimmable, which is unusual with a universal voltage mains driver. |
(5-7)x1W mains driver |
DealExtreme $8.00 |
Mains driver | 85-277 V AC | 5-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 46 mm x 24 mm x 17 mm | Output voltage 15-25 V. | |
(6-10)x1W mains driver |
FastTech $3.22 |
Mains bulb driver | 85-277 V AC | 6-10 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 44 mm x 17 mm x 17 mm | Output voltage 15-35 V. |
(6-10)x1W mains driver |
FastTech $2.03 |
Mains bulb driver | 85-277 V AC | 6-10 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 30 mm x 17 mm x 17 mm | Output voltage 18-35 V. |
(6-10)x1W mains driver |
FastTech $4.27 |
Mains driver | 85-277 V AC | 6-10 | 115 V or 230 V AC mains power | 80% | 300 mA |
1 | 80 mm x 33 mm x 23 mm | Output voltage 18-35 V. |
(6-10)x1W mains driver |
FastTech $2.68 |
Mains driver | 85-277 V AC | 6-10 | 115 V or 230 V AC mains power | 300 mA |
1 | 88 mm x 39 mm x 25 mm | Output voltage 18-36 V. | |
(6-10)x1W mains driver |
FastTech $5.45 |
Mains driver | 85-277 V AC | 6-10 | 115 V or 230 V AC mains power | 300 mA |
1 | 65 mm x 37 mm x 25 mm | Output voltage 18-35 V. | |
(6-7)x1W mains driver |
FastTech $4.32 |
Mains bulb driver | 220-240 V AC | 6-7 | 230 V AC mains power | 330 mA |
1 | 40 mm x 17 mm x 10 mm | ||
(8-12)x1W mains driver |
DealExtreme $6.80 |
Mains driver | 100-240 V AC | 8-12 | 115 V or 230 V AC mains power | 90% | 350 mA |
1 | 76 mm x 39 mm x 25 mm | Output voltage maximum 44 V. IP65 dust/water rating. |
(8-12)x3W mains driver |
FastTech $13.31 |
Mains driver | 100-240 V AC | 8-12 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 107 mm x 43 mm x 32 mm | Output current from photo; the "current draw" figure is nonsense. Output voltage 24-39 V. | |
(8-14)x1W mains driver |
DealExtreme $5.36 |
Mains driver | 110-265 V AC | 8-14 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 87 mm x 31 mm x 21 mm | Output voltage 24-48 V. Rose champagne coloured case. | |
(9-12)x1W mains driver |
FastTech $2.52 |
Mains bulb driver | 85-277 V AC | 9-12 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 30 mm x 17 mm x 16 mm | Output voltage 18-35 V. |
(9-12)x3W mains driver |
FastTech $15.19 |
Mains driver | 100-240 V AC | 9-12 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 106 mm x 43 mm x 32 mm | Output current from photo; the "current draw" figure is nonsense. Output voltage 24-39 V. | |
(9-15)x1W dimmable mains driver |
DealExtreme $6.32 |
Mains bulb driver | 220-240 V AC | 9-15 | 230 V AC mains power | 88% | 315 mA |
1 | 40 mm x 17 mm x 17 mm | Output voltage 27-50 V. Apparently a dimmable driver. Note that this voltage represents a shock hazard - use with caution. Should be small enough for some LED bulbs. |
(9-15)x1W mains driver |
FastTech $5.71 |
Mains bulb driver | 85-277 V AC | 9-15 | 115Â V, 230Â V AC mains power | 90% | 300 mA |
1 | 25 mm x 18 mm x 15 mm | Output voltage 27-50 V. Note that this voltage may represent a shock hazard - use with caution. |
(9-18)x1W mains driver |
FastTech $3.91 |
Mains bulb driver | 85-277 V AC | 9-18 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 54 mm x 21 mm x 20 mm | Output voltage 27-63 V. Note that this voltage represents a shock hazard - use with caution. |
(9-18)x1W mains driver |
FastTech $3.77 |
Mains driver | 85-277 V AC | 9-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 88 mm x 39 mm x 25 mm | Output voltage 27-63 V. Note that this voltage represents a shock hazard - use with caution. | |
(9-18)x1W mains driver |
FastTech $5.24 |
Mains driver | 85-277 V AC | 9-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 88 mm x 39 mm x 25 mm | Output voltage 27-63 V. Note that this voltage represents a shock hazard - use with caution. | |
(9-18)x1W mains driver |
FastTech $6.53 |
Mains driver | 85-277 V AC | 9-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 65 mm x 37 mm x 25 mm | Output voltage 27-63 V. Note that this voltage represents a shock hazard - use with caution. | |
0407A, (4-7)x1W mains driver |
DealExtreme $4.60 |
Mains driver | 100-240 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 65 mm x 25 mm x 20 mm | Output voltage 12-25 V. | |
0812A, (8-12)x1W mains driver |
DealExtreme $5.90 |
Mains driver | 100-240 V AC | 8-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 77 mm x 29 mm x 22 mm | Output voltage 24-45 V. IP65 dust/water rating. | |
0812D(10x1W) mains driver |
DealExtreme $12.50 |
Mains driver | 100-240 V AC | 8-14 | 115 V or 230 V AC mains power | 300 mA |
1 | 80 mm x 30 mm x 13 mm | Output voltage 24-45 V. IP65 dust/water rating. | |
1 channel dimmer with mains power supply and LED strip |
DealExtreme $21.20 |
User interface driver | 100-240 V AC (dimmer itself is 12 V) |
1-3
255 LEDs included |
115 V or 230 V AC mains power or 12 V DC |
8 A |
1 | 88 mm x 60 mm x 35 mm | Single channel LED dimmer; 12 V, with 8 A maximum current handling. Mains power supply included. 5 metre warm white LED strip included. | |
1 channel LED dimmer |
DealExtreme $11.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 100 mm x 58 mm x 34 mm | RF remote control included. | |
1 channel LED dimmer |
DealExtreme $7.40 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 88 mm x 60 mm x 35 mm | 1 channel, maximum 8 A. | |
1 channel LED dimmer |
DealExtreme $7.90 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 8 A |
1 | 106 mm x 55 mm x 34 mm | 1 channel, maximum 12 A. | |
1 channel LED dimmer |
DealExtreme $10.90 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 8 A |
1 | 88 mm x 60 mm x 55 mm | 0-100% dimming with a rotary control. | |
1 channel LED dimmer |
DealExtreme $7.50 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 105 mm x 57 mm x 34 mm | Dimmer controls on front of unit. | |
1 Channel LED Dimmer Controller |
DealExtreme $8.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC |
8 A |
1 | 89 mm x 60 mm x 35 mm | Single channel, 12-24 V PWM dimming, maximum current 8 A. Several customers report getting a 12 V only version. Buyer beware. |
|
1 Channel LED Dimmer Controller |
DealExtreme $5.40 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 3000 mA |
1 | 65 mm x 33 mm x 33 mm | Includes DC power socket and plug. | |
1 Channel LED Dimmer Controller |
DealExtreme $8.50 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 3000 mA |
1 | 38 mm x 31 mm x 9 mm | ||
1 channel LED strip controller |
DealExtreme $6.40 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
5 | 42 mm x 12 mm x 6 mm | Single channel LED controller, maximum power and current switching unknown; assumed to be 4 A per channel. Multiple modes; 5 dynamic effects (5 speeds), static colours (8 brightness levels). See DX sku.128434 for RGB version. | |
1 channel LED strip controller |
DealExtreme $11.80 |
User interface driver | 5.0-24 V | 1-6 | 5 V or 12 V or 24 V DC | 12 A |
1 | 250 mm x 13 mm x 8 mm | 1 channel, maximum 12 A. RF remote control. Length is probably complete length of cable. | |
1 channel LED strip controller |
DealExtreme $2.45 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 5000 mA |
2 | 410 mm x 10 mm x 10 mm | Brightness and speed adjustable. | |
1 channel LED strip controller |
DealExtreme $6.20 for 2 |
User interface driver | 5.0-24 V | 1-6 | 5 V or 12 V or 24 V | 12 A |
13 | 250 mm x 13 mm x 7 mm | 1 channel, maximum 12 A. | |
1 channel LED strip controller |
DealExtreme $6.21 for 2 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 12 A |
1 | 34 mm x 13 mm x 4 mm | 1 channel, maximum 12 A. | |
1 channel LED strip controller |
DealExtreme $10.00 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 4000 mA |
3 | 55 mm x 35 mm x 20 mm | 1 channel (probably; the controller says RGB), maximum 4 A. RF remote control. | |
1 channel LED strip controller |
DealExtreme $29.97 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 16 A |
1 | 120 mm x 88 mm x 27 mm | Uncertain if it works on 5 V. | |
1 channel LED strip controller |
DealExtreme $7.12 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 89 mm x 60 mm x 51 mm | 1 channel, maximum current 8 A. | |
1 channel LED strip controller |
DealExtreme $30.41 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 16 A |
1 | 120 mm x 62 mm x 26 mm | 1 channel, maximum 16 A. RF touch panel remote control. | |
1 channel LED strip controller |
DealExtreme $6.16 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 63 mm x 35 mm x 22 mm | 1 channel, maximum 6 A. IR remote control. | |
1 channel LED strip controller |
DealExtreme $2.50 |
User interface driver | 9-16 V | 1-4 | 12 V DC | 12 A |
10 | 240 mm x 13 mm x 5 mm | 1 channel, maximum 12 A switching (this might be only 6A). | |
1 channel LED strip dimmer |
DealExtreme $10.40 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 20 A |
1 | 80 mm x 64 mm x 24 mm | Single channel, maximum 20 A. RF remote control | |
1 channel LED strip dimmer |
DealExtreme $23.60 |
User interface driver | 12-24 V | 1-6 | 12 V DC | 6000 mA |
1 | 151 mm x 40 mm x 28 mm | Single channel, maximum 6 A. RF remote control. | |
1 channel LED strip dimmer |
DealExtreme $7.80 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 67 mm x 61 mm x 47 mm | ||
1 channel LED strip dimmer |
DealExtreme $6.22 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 8 A |
1 | 89 mm x 60 mm x 52 mm | Single channel, maximum 8 A. Control knob on dimmer. | |
1 channel LED strip dimmer |
DealExtreme $7.20 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 88 mm x 60 mm x 35 mm | 1 channel, maximum 8 A. Touch panel control. | |
1 channel LED strip dimmer |
DealExtreme $20.76 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 6000 mA |
1 | 85 mm x 45 mm x 23 mm | 1 channel, maximum 6 A. RF remote control. | |
1 channel LED strip dimmer |
DealExtreme $10.99 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 20 A |
1 | 79 mm x 64 mm x 24 mm | 1 channel, 20 A maximum switching. RF remote control. | |
1 channel LED strip dimmer |
DealExtreme $8.23 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V | 8 A |
1 | 67 mm x 61 mm x 47 mm | 1 channel, maximum 8 A switching. Rotary control. | |
1 channel LED strip dimmer |
DealExtreme $8.18 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 12 A |
1 | 86 mm x 40 mm x 7 mm | 1 channel, maximum 12 A switching. RF remote control. | |
1 channel LED strip dimmer |
DealExtreme $19.93 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 80 mm x 80 mm x 42 mm | 1 channel, maximum 8 A. Touch panel control. | |
1 channel LED strip dimmer |
DealExtreme $6.27 |
User interface driver | 5.0-24 V | 1-6 | 5V, 12 V or 24 V DC | 12 A |
1 | 87 mm x 40 mm x 7 mm | 1 channel, maximum 12 A. IR remote control. The stated dimensions are probably the size of the remote control. | |
1 channel LED strip dimmer |
DealExtreme $10.64 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 20 A |
1 | 80 mm x 63 mm x 24 mm | 1 channel, maximum 20 A. RF remote control. | |
1 channel LED strip music controller |
DealExtreme $7.00 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 2000 mA |
1 | 70 mm x 50 mm x 32 mm | Single channel, maximum current 2 A. | |
1 channel LED strip music controller |
DealExtreme $7.70 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 10 A |
1 | 70 mm x 50 mm x 23 mm | ||
1 channel LED strip music controller |
DealExtreme $7.80 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 10 A |
2 | 70 mm x 50 mm x 31 mm | ||
1 channel LED strip signal amplifier |
DealExtreme $5.43 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
1 | 265 mm x 12 mm x 4 mm | Single channel output, maximum 12 A (although label on device says "3x4A"). Possibly has an RGB input - a bit strange. Stated length appears to be overall length of cable. | |
1 channel LED strip touch controller |
DealExtreme $21.20 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 120 mm x 74 mm x 42 mm | 1 channel, maximum current 8 A. | |
1 channel LED strip wireless controller |
FastTech $2.95 |
User interface driver | 5.0-24 V | 1-6 | USB, 12 V, 24 V DC | 12 A |
8 | 86 mm x 40 mm x 7 mm | 1 channel, maximum 12 A. RF remote control. | |
1 channel LED strip wireless controller with COB LED |
DealExtreme $4.74 |
User interface driver | 12-13 V | 1-3
1 LED included |
12 V DC | 400 mA |
3 | 200 mm x 10 mm x 3 mm | Output voltage 12-13 V. Output current is a guess. Stated dimensions appear to be the COB LED. 1 warm white COB LED included. |
|
1 Color Dimmer w/ Remote Controller |
DealExtreme $12.70 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 105 mm x 53 mm x 32 mm | Single channel, 8 A. Includes radio remote control. | |
1 W - 3 W mains driver |
DealExtreme $9.03 |
Mains driver | 100-240 V AC | 1-3 | 115Â V or 230Â V AC mains power | 350 mA |
1 | 41 mm x 41Â mm x 20Â mm | Enclosed in white box, presumed transformer with buck regulator. Constant current out 350 mA @ 3-12 V. | |
1*1W (barcode) |
DealExtreme $6.10 |
Mains driver | 100-240 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage approximately 3.5 V. 1 cool white LED included (in an aluminium cabinet light). |
||
1*1W LED Driver Adapter |
DealExtreme $7.20 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 3.0-3.8 V. Output current listed here is a guess. 1 cool white LED included (in an aluminium downlight). Also available with a compact spotlight. |
||
1-10x 1 W LED driver |
Best Hong Kong $14.95 + shipping |
Mains driver | 90-260 V AC | 1-10 | 115 V or 230 V AC mains power | 330 mA |
1 | 96 mm x 28 mm x 17 mm | Output voltage 2-39 V, recommended less than 35 V. Short circuit protected. | |
1-2xAA boost driver |
FastTech $2.22 |
Boost driver | 0.9-3.6 V | 1 | 1-2x AA/AAA | 800 mA |
1 | 17 mm | Very much non-constant output; 1.5 V in gives 500 mA out, or 3.6 V in gives 800 mA out, but claimed to be constant current at 1.8-3.6 V. The talk of linear regulator in the product description just shows they don't know what they're talking about. The review mentions it's quite inefficient. | |
1-2xAA boost driver, 5 mode |
FastTech $2.22 |
Boost driver | 0.9-3.6 V | 1 | 1-2x AA/AAA | 800 mA |
5 | 17 mm | 5 modes, high, medium, low, strobe, SOS. Very much non-constant output; 1.5 V in gives 500 mA out, or 3.6 V in gives 800 mA out, but claimed to be constant current at 1.8-3.6 V. The talk of linear regulator in the product description just shows they don't know what they're talking about. | |
1-2xAA/1xLi-ion boost driver |
FastTech $4.74 |
Boost driver | 1.0-4.2 V | 1 | 1-2x AA/AAA | 1000 mA |
1 | 17 mm x 8 mm high - two boards in double layer | Unclear specs and the single review and two forum threads about the driver seem to be the blind leading the blind - buyer beware. | |
1-3x 3 Watt Dimmable Constant Current LED Driver |
Best Hong Kong $9.95 + shipping |
Buck driver | 10-24 V DC; also works with AC | 1-3 | ≥3x Li-ion, 12 V car battery | 800 mA |
1 | 35 mm x 31 mm diameter | Dimmable with trim adjustment 30-800 mA. | |
1-3x1 W |
DealExtreme $8.80 |
Mains driver | 85-265 V AC | 1-3
1 LED included |
115 V or 230 V AC mains power | 320 mA |
1 | Output current is a guess. Output voltage 3-10 V. 1 warm white LED included (in an aluminium downlight). Also available with 3 LEDs. |
||
1-6x 1 W driver |
Best Hong Kong $5.95 + shipping |
Buck driver | 4.0-24 V DC; also works with AC (max. 16 V AC) |
1-6 | 350 mA |
1 | 25 mm x 19 mm x 18 mm | Minimum input voltage is a guess. | ||
1-6x 3/5 W LED driver |
Best Hong Kong $19.95 + shipping |
Mains driver | 90-260 V AC | 1-6 | 660 mA |
1 | 96 mm x 28 mm x 17 mm | Output voltage 2-24 V. Short circuit protected. | ||
1.0 A, 100 W mains driver |
goodluckbuy.com $33.12 |
Mains driver | 110-240 V AC | 10-12 | 115 V or 230 V AC mains power | 3000 mA |
1 | Output voltage 32-36 V. | ||
1.0 A, 30 W mains driver |
DealExtreme $14.65 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 1000 mA |
1 | 95 mm x 41 mm x 29 mm | Output voltage 30-36 V. | |
1.2 A buck driver |
KaiDomain $2.83 |
Buck driver | 3.0-9.0 V | 1 | 1200 mA |
1 | 17 mm | Unknown input voltage range; even the web page title has two ranges (6-9 V and 3.0-9.5 V). Claimed 1.2 A maximum output current implies it's not a constant current driver. It's also not good considering a 1 A Schottky diode is used. Buyer beware. Formerly product ID 9912. |
||
1.2A, 5 mode driver |
DealExtreme $3.70 for 2 |
Step-down (non-buck) driver | 2.7-4.2 V | 1 | 1x Li-ion | 1200 mA |
5 | 17 mm | Actual output current said to be 1100-1300 mA. Five modes, memory unknown; high, medium (50%), low (10%), fast strobe (8 Hz), SOS. Unknown regulation method, possibly just PWM modes. Compare with DX 162783. | |
1.3 A buck driver |
KaiDomain $8.98 |
Buck driver | 3.0-26 V | 1 | 1300 mA |
1 | 20 mm | Formerly product ID 9265. | ||
1.3 A, 20 W mains driver |
DealExtreme $7.50 |
Mains driver | 85-265 V AC | 5-6 | 115 V or 230 V AC mains power | 87% | 1300 mA |
1 | 70 mm x 35 mm x 20 mm | 1.3 A output at 18 V is actually 23.4 W, so it's likely the output isn't tightly regulated. This may be confirmed by one report of 1070 mA output. Efficiency figure is from a review. |
1.3 A, 40 W mains driver |
DealExtreme $17.90 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 1300 mA |
1 | 95 mm x 41 mm x 30 mm | Output voltage 30-36 V. | |
1.4 A, 28 W mains driver |
DealExtreme $12.00 |
Mains driver | 85-265 V AC | 7-8 | 115 V or 230 V AC mains | 1400 mA |
1 | 65 mm round board | Output voltage 22-25 V. Review says output is 1.15 A. | |
1.4A, 5 mode driver |
DealExtreme $5.20 for 2 |
Step-down (non-buck) driver | 2.7-4.2 V | 1 | 1x Li-ion | 1400 mA |
5 | 17 mm | 5 modes with memory; high, medium (50%), low (10%), fast strobe (8 Hz), SOS. Unknown regulation method - possibly just PWM modes. Polarity protection. Compare with DX 162783. | |
1.5 V, 300 mA Boost Driver |
DealExtreme $8.51 for 5 |
Boost driver | 1.5-3.0 V | 1 | 1-2x AA | 40-80% | 300 mA |
1 | 15 mm | ~300 mA output with one fresh AA, ~530 mA with two AA cells. Accurate testing has been difficult, presumably because of the high switching frequency of the board. |
1.5A bike light driver |
DealExtreme $4.30 |
Buck driver | 7.4-8.4 V | 1 | 2x Li-ion | 1500 mA |
3 | 22 mm x 15 mm high (components on both sides) | 3 mode; high, low, strobe. A momentary switch (included) cycles through modes. The minimum input voltage of 7.4 V is hopefully higher than what it will actually accept. | |
1.6 A, 50 W mains driver |
DealExtreme $16.20 |
Mains driver | 85-265 V AC | 10-12 | 115 V or 230 V AC mains power | 1600 mA |
1 | 87 mm x 55 mm x 35 mm | Output voltage 32-36 V. | |
1.7 A, 60 W mains driver |
DealExtreme $16.00 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 1700 mA |
1 | 87 mm x 55 mm x 35 mm | Output voltage 30-36 V. | |
1.7A, 5 mode driver |
DealExtreme $4.31 |
Buck driver | 3.0-8.4 V | 1 | 1-2x Li-ion | 1700 mA |
5 | 17 mm | 5 modes, unknown memory; high, medium, low, fast strobe, SOS. | |
1/3/4 LED boost/buck |
Intl Outdoor Store $12.50 |
Boost driver and buck driver | 3.0-18 V | 1-4 | 1-4x Li-ion | 2800 mA |
3 | 26 mm x 17 mm high - two boards in double layer | Driver removed from site. Output current 5 A for 1 LED, 2.6-3.0 A for 3-4 LEDs; apparently not suited for 2 LEDs. Three modes with memory; high, medium (30%), low (5%). PWM frequency 1 kHz. Thermal protection and low voltage warning. |
|
10 W mains driver (0249A 5309H1) |
DealExtreme $5.83 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 900 mA |
1 | 55 mm x 30 mm x 16 mm | Output voltage 10-12 V. Current output reported to be unstable when used with some LED configurations, and stable at 1 A in other configurations. | |
10-18*1W LED Driver Adapter |
DealExtreme $27.00 |
Mains driver | 85-260 V AC | 10-18
12 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 27-63 V. Output current listed here is a guess. 12 warm white LEDs included (in an aluminium downlight). |
||
100 W, 2.5-2.8 A mains driver |
satistronics.com $22.98 + shipping |
Mains driver | 85-265 V AC | 10 | 115 V or 230 V AC mains | 2800 mA |
1 | 141 mm x 54 mm x 30 mm | Output current 2.5-2.8 A. Output voltage 30-36 V. Size info is assumed from a similar driver with identical photo. | |
100 W, 3.2 A mains driver |
satisled.com $22.98 + shipping |
Mains driver | 85-265 V AC | 10 | 115 V or 230 V AC mains | 3200 mA |
1 | 141 mm x 54 mm x 30 mm | Output voltage 30-36 V. | |
100-240 V AC 700 mA LED Driver |
ledstok.com $11.00 + shipping |
Mains driver | 100-240 V AC | 1-2 | 115 V or 230 V AC mains power | 700 mA |
1 | 40 mm x 40 mm x 20 mm | This product has been replaced on the retailer's web site with an LED optic. Oh boy. The driver may still be available elsewhere on the site. Update: The LED optic has vanished as well. Maximum output power 6 W. |
|
1000mA 3 mode LED driver |
DealExtreme $3.10 for 2 |
Linear regulator | 3.7-4.2 V | 1 | 1x Li-ion | 1000 mA |
3 | 17 mm | Assumed to be a linear regulator. Main chip is marked CAB1x. Three modes; high, low, strobe. | |
1000mA, 3 mode LED Driver |
DealExtreme $3.30 for 2 |
Linear regulator | 3.7-4.2 V | 1 | 1x Li-ion | 1000 mA |
3 | 17 mm | 3 mode; high, low, slow strobe. Unknown regulation method, assumed to be a linear regulator not just a PWM driver. | |
1000mA, 5 mode LED driver |
DealExtreme $3.70 for 2 |
Linear regulator | 3.7-4.2 V | 1 | 1x Li-ion | 1000 mA |
5 | 17 mm | 5 mode; high, medium, low, fast strobe, SOS. Unknown regulation method, assumed to be a linear regulator not just a PWM driver. | |
108W RGB controller |
DealExtreme $33.10 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 9 A |
1 | 130 mm x 40 mm x 29 mm | Three channels, 3 A per channel. Maximum power handling 108 W. RF remote control. | |
10C10B, 100W mains driver |
DealExtreme $40.74 |
Mains driver | 90-260 V AC | 10 | 115 V or 230 V AC mains power | 88% | 3000 mA |
1 | 156 mm x 70 mm x 43 mm | Output voltage 28-36 V. Intended for 10S10P LED arrays. |
10W Angel Eyes (2 pack) |
DealExtreme $72.80 |
Buck driver | 6.0-24 V | 1
8 LEDs included |
12 V automotive | 2000 mA |
1 | 60 mm x 30 mm x 30 mm | Output voltage 3-6 V. Output power 10 W; output current is a wild guess. Comes with 4 LEDs per driver, 8 total. Designed for angel eye replacements for BMW. |
|
10W boost driver |
FastTech $4.37 |
Boost driver | 12-12 V | 6-10 | 12 V | 330 mA |
1 | 47 mm x 22 mm x 14 mm | Output voltage 24-34 V. Output current is assumed; claimed current draw is bogus. | |
10W LED mains driver |
buyincoins.com $18.12 |
Mains driver | 100-265 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 950 mA |
1 | 66 mm x 34 mm x 24 mm | Item now missing from site. Output voltage 8-12 V. Includes 10 W warm white LED (3s3p LED plate) and large heatsink. |
|
10W LED mains driver |
Focalprice $6.38 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 91% | 900 mA |
1 | 76 mm x 28 mm x 22 mm | Output voltage 7-12 V. IP67 dust/water rating. Ideally suited for LED plates with 3x3 dice. |
10W low voltage AC driver |
DealExtreme $4.90 |
Buck driver | 12-24 V DC; also works with AC | 1-3 | 12 V or 24 V AC | 85% | 900 mA |
1 | 66 mm x 25 mm x 20 mm | Output voltage 3-10 V. IP67 dust/water rating. |
10W mains driver (for 4S LED array) |
DealExtreme $5.13 |
Mains bulb driver | 85-277 V AC | 4
1 LED included |
115Â V, 230Â V AC mains power | 640 mA |
1 | 32 mm x 18 mm x 17 mm | Output voltage 12-14 V. Includes a cool white LED array. |
|
10W mains driver (yellow case) |
everbuying.com $5.87 |
Mains driver | 85-265 V AC | 2-4 | 115 V or 230 V AC mains power | 900 mA |
1 | 77 mm x 30 mm x 25 mm | SKU FLA0553. Output voltage 7-12 V. | |
12 LED driver |
KaiDomain $5.92 |
Unspecified driver type | 9-12.6 V | 12 | 3x Li-ion |
|
5 | 26 mm x 24 mm high - two perpendicular boards | Unknown regulation method, unknown output current, unknown output voltage, input voltage range is a guess - buyer beware. 5 mode; high, medium, low, strobe, SOS. As used in this torch. | |
12-18*1W mains driver |
DealExtreme $7.60 |
Mains driver | 85-277 V AC | 12-18 | 115 V or 230 V AC mains power | 90% | 310 mA |
1 | 115 mm x 45 mm x 26 mm | Output voltage 33-72 V. Note that this voltage represents a shock hazard - use with caution. |
120W mains driver |
DealExtreme $38.89 |
Mains driver | 220-240 V AC | 12-15 | 230 V AC mains power | 3000 mA |
1 | 174 mm x 60 mm x 34 mm | Output voltage assumed to be 38-43 V. | |
12A 288W RGB controller |
DealExtreme $33.30 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 87 mm x 68 mm x 25 mm | Three channels, 4 A per channel. Maximum power handling 144 W at 12V, 288 W at 24 V. RF remote control. | |
12V power supply, maximum 250mA 3W |
DealExtreme $5.50 |
Mains driver | 85-265 V AC | 0 | 115 V or 230 V AC mains power | 70-75% | 250 mA |
1 | 51 mm x 27 mm x 22 mm | This is a constant voltage power supply, not a constant current LED driver. LEDs should be driven with something to limit the current, such as a resistor. The claimed maximum output current of 250 mA is quite low for the price; a 1 A power adaptor costs less. The claimed efficiency is much lower than 12 V mains power supplies normally are. |
12W MR16 boost driver |
DealExtreme $5.18 |
MR16 (boost) driver | 12-17 V DC; also works with AC | 5-12 | 12 V AC or DC | 88% | 300 mA |
1 | 47 mm x 24 mm x 14 mm | Output voltage 16-42 V. |
144W RGB LED controller |
DealExtreme $14.10 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
1 | 88 mm x 68 mm x 25 mm | 3 channel LED controller, each channel up to 4 A. Maximum power handling 144 W. | |
144W RGB Signal Amplifier for LED Strip Light |
DealExtreme $13.10 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
1 | 105 mm x 64 mm x 24 mm | RGB PWM controller. Input PWM signal, each channel output 4 A PWM at 12 V. Maximum power handling 144 W. | |
15 LED driver |
KaiDomain $13.06 |
Unspecified driver type | 12-16.8 V | 15 | 4x Li-ion |
|
5 | Unknown regulation method, unknown output current, unknown output voltage, input voltage range is a guess, unknown size - buyer beware. 5 modes; high, medium, low, strobe, SOS. As used in this torch. | ||
150W mains driver |
DealExtreme $39.20 |
Mains driver | 220-240 V AC | 10-12 | 230 V AC mains power | 4500 mA |
1 | 170 mm x 60 mm x 34 mm | Output voltage assumed to be 32-36 V. | |
16-20W mains driver |
DealExtreme $17.20 |
Mains driver | 85-265 V AC | 9-11 | 115 V or 230 V AC mains power | 600 mA |
1 | 65 mm x 22 mm high | Output voltage 28-34 V. Specifications disagree with label as shown in photo, which indicates indicates (25-30)*1W, not (9-11)*3W - buyer beware. | |
16W fluorescent lamp replacement LED driver |
DealExtreme $7.80 |
Mains bulb driver | 180-265 V AC | 20-24 | 230 V AC mains power | 218 mA |
1 | 250 mm x 16 mm x 10 mm | Designed as a LED driver for fluorescent tube replacements, with 20-24 LEDs in series and 12 low power LEDs in parallel. Formerly listed as 12W. Actual output voltage unknown. | |
17mm blank board |
CN Quality Goods $0.70 + shipping |
Unspecified driver type | N/A | N/A |
|
1 | 17 mm | Blank board. Can be used as a battery contact or for adapting a smaller driver to fit a torch. | ||
17mm contact PCB |
Intl Outdoor Store $2.65 for 5 |
Unspecified driver type | N/A | 0 |
|
N/A | 17 mm | Driver removed from site. Blank board. Can be used as a battery contact or for adapting a smaller driver to fit a torch. |
||
18W fluorescent lamp replacement LED driver |
FastTech $6.08 |
Mains driver | 85-277 V AC | 18-24 | 115 V or 230 V AC mains power | 230 mA |
1 | 188 mm x 18 mm x 10 mm | Designed as a LED driver for fluorescent tube replacements. Output voltage 48-82 V. | |
18W mains driver |
DealExtreme $5.00 |
Mains driver | 85-265 V AC | 12-18 | 115 V or 230 V AC mains power | 90% | 315 mA |
1 | 53 mm x 21 mm x 19 mm | Output voltage 63 V. Because of the originally contradictory specs (and the present lack of output voltage range) it's possible this is only 4-5 LEDs with at output voltage 12-18 V. Buyer beware. |
1A buck driver |
FastTech $5.28 |
Buck driver | 12-14 V | 3 | 12 V automotive | 1000 mA |
1 | 43 mm x 24 mm x 8 mm | Unknown main chip; it has been sanded. | |
1A buck/boost driver |
Intl Outdoor Store $9.97 |
Boost driver and buck driver | 2.7-5.5 V | 1 | 1x Li-ion 3-4x NiMH |
84-95% | 1000 mA |
2 | 17 mm x 6.5 mm high - two boards in double layer | Driver removed from site. Two modes; high (1 A), medium (unknown current). Low voltage protection, polarity protection. |
1A, 1 mode driver |
KaiDomain $10.42 for 5 |
Buck driver | 3.0-18 V | 1 | 1000 mA |
1 | 17 mm | Incomplete specifications given. Said to be a Cree XM-L driver but only has an output of 1 A. Formerly product ID 11360. |
||
1A, 5 mode driver |
DealExtreme $3.90 |
User interface driver | 3.0-4.5 V | 1 | 1x Li-ion | 1000 mA |
5 | 17 mm | 5 mode with memory; high, medium, low, strobe, SOS. Polarity protection, low voltage warning. Current regulation method unclear - buyer beware. | |
1W (300mA) mains driver |
DealExtreme $2.30 |
Mains bulb driver | 90-265 V AC | 1 | 115 V or 230 V AC mains power | 70% | 300 mA |
1 | 24 mm x 15 mm x 15 mm | Output voltage 2.2-4.0 V. |
1W boost driver |
DealExtreme $2.00 |
Boost driver | 0.9-1.5 V | 1 | 1x AA | 350 mA |
1 | 15 mm | Unknown input voltage range; assumed to work with single AA cell. Unknown regulation quality. Probably a larger version of DX sku.128084. | |
1W LED driver grey case |
DealExtreme $6.20 |
Mains driver | 85-245 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 300 mA |
1 | Output current is a guess. 1 warm white LED included (in an aluminium downlight). |
||
1W MR16 driver |
DealExtreme $6.64 for 10 |
MR16 (buck) driver | 12-17 V DC; also works with AC | 3 | 12 V DC | 300 mA |
1 | 29 mm x 18 mm x 10 mm | Output voltage 9-10 V. | |
1x 1 W LED driver B350B12D1-1 |
Best Hong Kong $5.95 + shipping |
Buck driver | 12-12 V | 1 | 350 mA |
1 | 23 mm x 19 mm x 14 mm | |||
1x 3 W LED driver B700B12D3-1 |
Best Hong Kong $5.95 + shipping |
Buck driver | 12-12 V | 1 | 700 mA |
1 | 23 mm x 19 mm x 14 mm | |||
1x 3W |
DealExtreme $10.90 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 670 mA |
1 | Output current is a guess. 1 warm white LED included (in an aluminium downlight). |
||
1x 5 W LED driver B700B12D5-1 |
Best Hong Kong $5.95 + shipping |
Buck driver | 12-12 V | 1 | 700 mA |
1 | 23 mm x 19 mm x 14 mm | Product removed from site; probably replaced by the 1-6x 1W driver. | ||
1x 5W mains driver |
DealExtreme $8.80 |
Mains driver | 110-240 V AC | 1 | 115Â V or 230Â V AC mains power | 85% | 1080 mA |
1 | 30 mm x 15Â mm x 15Â mm | Transformer with buck regulator. Claimed 2 A constant current output @ 3.5-3.8 V (ie, 7-7.6 W), although one buyer claims it's only 1.2 A output (~4.2 W), and another says a mere 1.08 A, making it overpriced compared to the other single LED drivers. Either way it's well short of the claimed 2 A constant current output. Buyer beware! |
1x AA Boost Driver |
Intl Outdoor Store $3.97 |
Boost driver | 0.9-1.5 V | 1 | 1x AA | 500 mA |
1 | 13 mm | Driver removed from site. 5 modes (memory unknown) using PWM at 100 kHz; high, medium (150 mA), low (20 mA), strobe, SOS. |
|
1x AA, 3 mode boost driver (LDCH) |
Shining Beam $5.45 + shipping |
Boost driver | 0.8-1.7 V | 1 | 1x AA | 900 mA |
3 | 14 mm | SKU 1406. Three modes with memory; low 25 mA, medium 200 mA, high 900 mA (claimed). | |
1x AA, 3 W Boost Driver, 20 mode, v2 |
DealExtreme $2.38 |
Boost driver | 0.8-1.7 V | 1 | 1x AA | 800 mA |
20 | 17 mm single layer, old version was 16 mm | Boost driver, 20 modes in three groups. Output voltage and current not constant, 1.0 V in gives ~300 mA out, 1.4 V in gives ~700 mA out. Run on two fresh NiMH it outputs 1.8 A and gets very hot - not advised. I believe this is identical in operation to the AAA driver except for physical size (and the new version of this board is black). "LDCH" on the back of the board is the manufacturer. Tip: To disable modes see this post. |
|
1x AA, 500 mA Boost Driver, 5 mode (3 steady) |
DealExtreme $3.50 |
Boost driver | 0.9-1.5 V | 1 | 1x alkaline or NiMH | 65-80% | 500 mA |
5 | 17 mm - two boards in double layer | ~500 mA output, current not constant. Spec claims 5 modes; high 100%, mid 35%, low 10%, strobe, SOS. However one reviewer claims 16 modes, and with the steady modes in the opposite order. |
1x AAA, 3 W Boost Driver, 20 mode |
DealExtreme $4.50 |
Boost driver | 0.8-1.7 V | 1 | 1x AAA | 800 mA |
20 | 10 mm - two boards in double layer | Boost boards; output voltage and current not constant. Gets really hot when used with two AA cells. I believe this is identical in operation to the AA driver but is narrower and taller than that one. | |
1x AMC7135 |
FastTech $1.19 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 350 mA |
1 | 17 mm | Linear regulator using 1x AMC7135 chip. Polarity protected. See extra AMC7135 notes below. |
1x AMC7135 chip, 350mA |
FastTech $1.88 for 10 |
Linear regulator | 2.7-6.0 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 350 mA |
1 | 5 mm x 4 mm x 2 mm | Single AMC7135 linear regulator chip (10 pack). Note - surface mount. See extra AMC7135 notes below. |
1x AMC7135 chip, 350mA |
FastTech $11.09 for 100 |
Linear regulator | 2.7-6.0 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 350 mA |
1 | 5 mm x 4 mm x 2 mm | Single high output AMC7135 linear regulator chip (100 pack). Note - surface mount. See extra AMC7135 notes below. |
1x AMC7135 chip, 380mA |
FastTech $2.41 for 10 |
Linear regulator | 2.7-6.0 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 380 mA |
1 | 5 mm x 4 mm x 2 mm | Single high output AMC7135 linear regulator chip (10 pack). Note - surface mount. See extra AMC7135 notes below. |
1x AMC7135 on empty star |
FastTech $2.37 for 3 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 350 mA |
1 | 20 mm star board | Linear regulator using 1x AMC7135 chip mounted on a LED star. Polarity protected. See extra AMC7135 notes below. |
1x AMC7135 on star with 1W LED |
FastTech $1.73 |
Linear regulator | 3.3-6.6 V | 1
1 LED included |
1x Li-ion 3x NiMH 4x alkaline |
50-97% | 350 mA |
1 | 20 mm star board | Linear regulator using 1x AMC7135 chip mounted on an LED star board. See extra AMC7135 notes below. Includes a generic 1 W warm white LED. |
1x AMC7135, LEDROAD LED-153603 |
FastTech $1.15 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 350 mA |
1 | 20 mm | Linear regulator using 1x AMC7135 chip. Polarity protected, low voltage protection. See extra AMC7135 notes below. |
1x AMC7135 |
PCB Components $5.70 (approx) |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 330 mA |
1 | 17 mm | Linear regulator using one AMC7135 chip (thus the pictured driver is not this one). Note that the claimed input voltage doesn't allow for the polarity protection diode; the correct figures are listed in this table. See extra AMC7135 notes below. |
1x1W |
DealExtreme $12.00 |
Mains driver | 95-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 350 mA |
1 | Incomplete specs - output current listed is a guess. 1 white LED included (in a fancy acrylic downlight). |
||
1x1W (220V) |
DealExtreme $10.50 |
Mains driver | 220-240 V AC | 1
1 LED included |
230 V AC mains power | 300 mA |
1 | Driver is marked 85-265 V AC input but description and label on product says 220 V. Output voltage 2-6 V. 1 red LED included (in a fancy aluminium holder). |
||
1x1W blank |
DealExtreme $11.00 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 300 mA |
1 | 1 white LED included (in a fancy aluminium holder). | ||
1x1W blue |
DealExtreme $10.00 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 330 mA |
1 | Incomplete specs - output current listed is a guess. 1 red LED included (in a fancy acrylic downlight). |
||
1x1W bulb driver |
FastTech $1.49 |
MR16 (buck) driver | 12-17 V DC; also works with AC | 1 | 12 V AC or DC | 300 mA |
1 | 18 mm x 14 mm x 10 mm | Output current is assumed. Unknown driver chip. Typical MR16 bulb driver but without the pins. | |
1x1W mains driver |
goodluckbuy.com $2.70 |
Mains driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 90% | 320 mA |
1 | Product removed from retailer's site. Output voltage 3-5 V. |
|
1x1W mains driver |
FastTech $3.03 |
Mains bulb driver | 85-245 V AC | 1 | 115 V or 230 V AC mains power | 350 mA |
1 | 23 mm x 16 mm x 16 mm | ||
1x2W 12V driver |
FastTech $4.70 for 2 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1
2 LEDs included |
12 V DC | 600 mA |
1 | Output voltage 3-4 V. Unknown driver size. Includes 2 LG warm white LEDs. |
||
1x2W 12V driver |
FastTech $4.70 for 2 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1
2 LEDs included |
12 V DC | 600 mA |
1 | Output voltage 3-4 V. Unknown driver size. Includes 2 LG cool white LEDs. |
||
1x2W 12V driver |
FastTech $4.66 for 2 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1
2 LEDs included |
12 V DC | 600 mA |
1 | Output voltage 3-4 V. Unknown driver size. Includes 2 LG warm white LEDs. |
||
1x2W 12V driver |
FastTech $4.66 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1
2 LEDs included |
12 V DC | 600 mA |
1 | Output voltage 3-4 V. Unknown driver size. Includes 2 LG cool white LEDs. |
||
1x2W mains driver |
FastTech $5.31 for 2 |
Mains bulb driver | 85-265 V AC | 1
2 LEDs included |
115Â V, 230Â V AC mains power | 600 mA |
1 | Output voltage 3-4 V. A forum comment points out the input contacts are very close together; this is dangerous - buyer beware. Unknown driver size. Includes 2 LG warm white LEDs. |
||
1x2W mains driver |
FastTech $5.31 for 2 |
Mains bulb driver | 85-265 V AC | 1
2 LEDs included |
115Â V, 230Â V AC mains power | 600 mA |
1 | Output voltage 3-4 V. A forum comment for FT sku.2085200 points out the input contacts are very close together; this is dangerous - buyer beware. Unknown driver size. Includes 2 LG cool white LEDs. |
||
1x2W mains driver |
FastTech $5.27 for 2 |
Mains bulb driver | 85-265 V AC | 1
2 LEDs included |
115Â V, 230Â V AC mains power | 600 mA |
1 | Output voltage 3-4 V. A forum comment for FT sku.2085200 points out the input contacts are very close together; this is dangerous - buyer beware. Unknown driver size. Includes 2 LG warm white LEDs. |
||
1x2W mains driver |
FastTech $5.27 for 2 |
Mains bulb driver | 85-265 V AC | 1
2 LEDs included |
115Â V, 230Â V AC mains power | 600 mA |
1 | Output voltage 3-4 V. A forum comment for FT sku.2085200 points out the input contacts are very close together; this is dangerous - buyer beware. Unknown driver size. Includes 2 LG cool white LEDs. |
||
1x3W |
DealExtreme $19.20 |
Mains driver | 95-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 660 mA |
1 | Incomplete specs - output current listed is a guess. 1 amber LED included (in a fancy crystal shaped downlight). |
||
1x3W blank |
DealExtreme $12.50 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 680 mA |
1 | 1 white LED included (in a fancy aluminium holder). | ||
1x3W blue |
DealExtreme $11.80 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 700 mA |
1 | Incomplete specs - output current listed is a guess. 1 white LED included (in an aluminium downlight). |
||
1x3W MR16 driver |
FastTech $1.49 |
MR16 (buck) driver | 7.0-18 V DC; also works with AC | 1 | 12 V AC or DC | 650 mA |
1 | 18 mm x 14 mm x 10 mm | Uses CL6807 driver chip (see notes on CL6807 below). There's a nice review of the driver on the site. | |
1xAA boost |
CN Quality Goods $3.90 + shipping |
Boost driver | 0.9-1.5 V | 1 | 1x AA 1x AAA |
500 mA |
1 | 14 mm | 5 modes; high, medium, low, strobe, SOS. | |
1xAA boost |
CN Quality Goods $6.50 + shipping |
Boost driver | 0.9-1.5 V | 1 | 1x AA NiMH | 800 mA |
1 | 17 mm | 5 modes in two groups; high, medium (50%), low (5%), strobe, SOS. | |
1xAA boost driver |
KaiDomain $11.37 for 5 |
Boost driver | 0.9-1.5 V | 1 | 1x AA | 400 mA |
5 | 14 mm | Description claiming "output voltage: less than 1.5V" is just a laugh, as is the "Length: 7.50cm" dimension and the "5pcs a pair" quantity. Unknown minimum input voltage - values given here are just a guess. Buyer beware. Formerly product ID 11063. |
|
1xAA boost, 5 mode |
FastTech $2.95 |
Boost driver | 0.8-1.5 V | 1 | 1x AA/AAA | 550 mA |
5 | 13 mm | 5 modes; high, medium, low, strobe, SOS. | |
1xAA, 3W driver |
KaiDomain $5.11 |
Boost driver | 0.9-3.0 V | 1 | 1-2x AA NiMH | 700 mA |
17 | 20 mm claimed, possibly smaller | Apparently a voltage regulator, not a current regulator. Output voltage 2-7 V, must be >= input voltage. 17 mode in three group. Formerly product ID 1672. |
|
1x AMC7135 |
DealExtreme $16.68 for 20 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 350 mA |
1 | 17 mm | Clearance price $13.39. Linear regulator using AMC7135 chip. See extra AMC7135 notes below. |
2 channel LED colour temperature fader |
DealExtreme $14.20 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 4000 mA |
1 | 78 mm x 53 mm x 15 mm | 2 channel, maximum 2 A per channel. Designed to fade between two LED strips, such as two different colour temperatures giving continuously variable colour temperature. | |
2 channel LED dimmer |
DealExtreme $16.10 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 43 mm x 35 mm x 9 mm | 2 channel (such as cool white/warm white), maximum 3 A per channel. Touch panel control. | |
2 channel LED strip controller |
DealExtreme $26.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 114 mm x 56 mm x 23 mm | 2 channels, maximum 6 A per channel. RF remote control. Intended to change between two LED strips with different colour temperatures. | |
2 channel LED strip controller |
DealExtreme $23.17 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 85 mm x 85 mm x 35 mm | 2 channel, maximum 4 A per channel. IP25 dust/water rating. | |
2 channel LED strip controller |
DealExtreme $29.76 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 16 A |
1 | 120 mm x 88 mm x 27 mm | 2 channel, maximum 8 A per channel. Intended for colour temperature control. RF touch panel remote control. | |
2 channel LED strip controller |
DealExtreme $20.76 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 6000 mA |
1 | 85 mm x 45 mm x 23 mm | 2 channel, maximum 6 A per channel. RF remote control. | |
2 channel LED strip controller |
DealExtreme $18.54 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
4 | 86 mm x 86 mm x 35 mm | 2 channel, maximum 4 A per channel. Touch panel control. | |
2 channel LED strip controller |
DealExtreme $18.49 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 87 mm x 87 mm x 36 mm | 2 channel, maximum 4 A per channel. Touch panel control. | |
2 channel LED strip controller (black) |
DealExtreme $27.25 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 86 mm x 86 mm x 32 mm | 2 channel, maximum 4 A per channel. Touch panel controller. Intended as a colour temperature controller. IP25 dust/water rating. | |
2 channel LED strip controller (white) |
DealExtreme $27.25 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 86 mm x 86 mm x 32 mm | 2 channel, maximum 4 A per channel. Touch panel controller. Intended as a colour temperature controller. IP25 dust/water rating. | |
2 channel touch panel LED strip controller |
DealExtreme $17.48 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 86 mm x 86 mm x 35 mm | 2 channel, maximum 4 A per channel. Touch panel control. | |
2 channel touch panel LED strip controller |
DealExtreme $25.59 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 12 A |
1 | 160 mm x 120 mm x 35 mm | Intended to control mixing between LED strips of two tints. 2 channel, maximum 6 A per channel. Touch panel RF remote control. | |
2 mode driver |
FastTech $1.70 |
User interface driver | 3.0-4.5 V | 1 | 2600 mA |
2 | 17 mm | 2 modes; high, low (10%). Buyer beware. Unknown regulation method, and the subtitle says it's intended for two LED luminous flux bins and a non-specific LED type suffix - simply nonsense (or Chinese code for "we don't have a clue about LEDs"). | ||
2 mode PWM driver |
FastTech $1.81 |
User interface driver | 3.0-4.2 V | 1 | 1x Li-ion | 3000 mA |
2 | 17 mm | Direct drive. No indication of maximum spec for current handling but a user test achieved 3 A without apparent damage. 2 modes; high, low. The claim of constant current clashes with the claim of direct drive - buyer beware. Low voltage protection. | |
2*2W MR16 driver |
DealExtreme $5.87 for 10 |
MR16 (buck) driver | 12-17 V DC; also works with AC | 2 | 12 V AC/DC | 480 mA |
1 | Exact specs unknown. | ||
2-4*3W mains driver |
DealExtreme $4.17 |
Mains driver | 85-260 V AC | 2-4 | 115Â V, 230Â V AC mains power | 590 mA |
1 | 56 mm x 32 mm x 21 mm | Output voltage 6-15 V. | |
2.0 A, 70 W mains driver |
DealExtreme $25.00 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 88% | 2000 mA |
1 | 120 mm x 56 mm x 34 mm | Output voltage 30-36 V. Power factor >0.98. |
2.2W 93-Mode Controller for ZJ168 Drive LED w/ Remote Control |
DealExtreme $20.80 |
User interface driver | 12-12 V | 1-3 | 12 V DC |
|
1 | 93 mm x 57 mm x 25 mm | Compatible with LED emitters with ZJ168 drive. Maximum power handling 2.2 W. RF remote control. | |
2.4A PWM driver |
FastTech $3.39 |
User interface driver | 3.0-4.2 V | 1 | 1x Li-ion | 2400 mA |
5 | 17 mm | Unknown regulation method; most likely direct drive. 5 modes; high (100%), medium (42%), low (6%), strobe, SOS. | |
2.5 A, 80 W mains driver |
DealExtreme $22.90 |
Mains driver | 85-265 V AC | 10-12 | 115 V or 230 V AC mains power | 2500 mA |
1 | 120 mm x 55 mm x 35 mm | Output voltage 32-36 V. | |
2.5-3.0 A, 3 mode driver |
DealExtreme $4.20 |
Buck driver | 4.5-18 V | 1-3 | 2500 mA Can be modified to 3000 mA |
3 | 22 mm x 12 mm high | Update Jan 2016: Some changes made to the driver, unknown what change to specs these have. 3 mode; high, low, fast strobe. Output current said to be 2500-3000 mA. Assumed to be suitable for 1-3 LEDs. Driver fitted with a couple SS34 Schottky diodes. An alternative is DX sku.57779. |
||
2.5A PWM driver |
FastTech $2.52 |
User interface driver | 3.0-4.2 V | 1 | 1x Li-ion | 2500 mA |
5 | 17 mm | Direct drive. 5 modes; high, medium, low, strobe, SOS. Unknown if the stars do anything. | |
2.6A, 5 mode driver |
DealExtreme $5.56 |
Buck driver | 3.0-8.0 V | 1 | 1-2x Li-ion | 2600 mA |
5 | 22 mm | 5 modes, unknown memory; high, medium, low, strobe, SOS. Polarity protection. | |
2.8A buck driver |
FastTech $5.59 |
Buck driver | 3.0-8.4 V | 1 | 1-2x Li-ion | 2800 mA |
5 | 21 mm x 10 mm high - two boards in double layer | Buck driver with components on both sides of main board. Larger dummy board for battery contact. 5 modes in 2 groups without memory; low (5%), medium (50%), high (100%), strobe, SOS. Alternate group by half press. Low voltage warning at 3.0 V and 5.8 V. | |
2.8A Cree XM-L driver |
Intl Outdoor Store $4.98 |
Buck driver | 6.0-18 V | 1-3 | 2-4x Li-ion | 2800 mA |
3 | 22 mm x 16 mm high - two boards in double layer | Driver removed from site. 3 modes; high, low (20%), strobe. Low soltage protection, reverse polarity protection. Presumably the same as DX sku.57779. |
|
2.8A, 3 mode driver |
DealExtreme $6.15 for 2 |
User interface driver | 2.7-4.2 V | 1 | 1x Li-ion | 2800 mA |
3 | 17 mm | Actual output current said to be 2500-3100 mA; probably direct drive. Three mode with memory; high, medium (50%), strobe (8 Hz). | |
2.8A, 5 mode LED driver |
Focalprice $6.06 |
Buck driver | 5.0-8.4 V | 1 | 2x Li-ion | 85% | 2800 mA |
5 | 25 mm | 5 modes, unknown memory or relative levels; high, medium, low, fast strobe, SOS. Minimum input voltage is a guess. Efficiency is manufacturer claim. |
2.8A, 8.4V 4 mode LED driver |
KaiDomain $4.62 |
Buck driver | 8.4-8.4 V | 1 | 2x Li-ion | 2800 mA |
4 | 22 mm | 4 modes; high, medium, low, strobe (long press for 3 seconds). | |
20mm blank 2x AMC7135 star board |
FastTech $2.76 for 10 |
Unspecified driver type | N/A | N/A |
|
N/A | 20 mm star board | Blank LED star board with space for 2x AMC7135 linear regulator chips and 1x LED. | ||
20mm Multi-option Switch PCB |
Intl Outdoor Store $2.21 for 5 |
Unspecified driver type | N/A | 0 |
|
1 | 20 mm | Driver removed from site. Blank board with contacts for multimode switch. |
||
20W boost driver |
DealExtreme $10.50 |
Boost driver | 12-12 V | 4-6 | 1300 mA |
1 | 78 mm x 38 mm x 21 mm | Output voltage 14-20 V. Includes driver heatsink. | ||
20W boost driver |
DealExtreme $11.30 |
Boost driver | 9-15 V | 5 | 3x Li-ion, 12 V automotive |
1300 mA |
1 | 69 mm x 50 mm x 20 mm | Output voltage 16-18 V. Includes driver heatsink. | |
20W boost driver |
Focalprice $11.53 |
Boost driver | 12-30 V | 9-11 | 12 V or 24 V automotive | 650 mA |
1 | 75 mm x 40 mm x 25 mm | Output voltage 32-36 V. Includes driver heatsink. | |
20W boost driver |
DealExtreme $10.60 |
Boost driver | 12-24 V | 9-11 | 12 V or 24 V automotive | 650 mA |
1 | 60 mm x 36 mm x 20 mm | Output voltage 30-36 V. Includes driver heatsink. | |
20W boost driver |
FastTech $5.97 |
Boost driver | 12-24 V | 9-11 | 12 V or 24 V DC | 95% | 650 mA |
1 | 52 mm x 31 mm x 20 mm | Output voltage 30-36 V. Includes heatsink. |
20W boost driver |
DealExtreme $5.49 |
Boost driver | 12-24 V DC; also works with AC | 10 | 12 V, 24 V DC | 600 mA |
1 | 61 mm x 26 mm x 19 mm | Output voltage 30-36 V. | |
20W LED low voltage AC driver |
DealExtreme $7.50 |
Mains driver | 85-265 V AC | 9-11 | 115 V or 230 V AC mains power | 650 mA |
1 | 73 mm x 36 mm x 22 mm | This was originally listed as a low voltage AC driver but is now just a normal mains driver. Output voltage roughly 30-34 V (DC). | |
20W mains driver |
FastTech $6.35 |
Mains driver | 85-265 V AC | 10 | 115 V or 230 V AC mains power | 650 mA |
1 | 73 mm x 36 mm x 28 mm | Output voltage 30-36 V. | |
20W mains driver |
DealExtreme $4.80 |
Mains bulb driver | 100-240 V AC | 10-12 | 115Â V, 230Â V AC mains power | 600 mA |
1 | 53 mm x 25 mm x 18 mm | Output voltage 30-36 V. | |
20x1W mains driver |
FastTech $12.10 |
Mains driver | 100-240 V AC | 17-23 | 115Â V, 230Â V AC mains power | 320 mA |
1 | 106 mm x 42 mm x 31 mm | Photo apparently shows 320 mA; the "current draw" figure is nonsense - buyer beware. Output voltage 54-70 V. Note that this voltage represents a shock hazard - use with caution. | |
21mm blank board |
CN Quality Goods $0.75 + shipping |
Unspecified driver type | N/A | N/A |
|
1 | 21 mm | Blank board. Can be used as a battery contact or for adapting a smaller driver to fit a torch. | ||
22W fluoro bulb driver |
DealExtreme $8.80 |
Mains bulb driver | 180-265 V AC | 20-24 | 230 V AC mains power | 290 mA |
1 | 240 mm x 16 mm x 10 mm | Designed as a driver for fluorescent tube replacements, with 20-24 LEDs in series and 16 low power LEDs in parallel. Actual output voltage unknown. | |
24W fluoro bulb replacement mains driver |
DealExtreme $8.80 |
Mains bulb driver | 180-265 V AC | 20-24 | 230 V AC mains power | 325 mA |
1 | 250 mm x 16 mm x 10 mm | Designed as a driver for fluorescent tube replacements, with 20-24 LEDs in series and 18 low power LEDs in parallel. Actual output voltage unknown. A 9-18 W version is sku.203740. | |
25W mains driver |
DealExtreme $11.70 |
Mains driver | 85-265 V AC | 5 | 115 V or 230 V AC mains power | 1600 mA |
1 | 94 mm x 40 mm x 26 mm | Output voltage 16-18 V. Previously claimed to be suitable for E27 and GU10 light bulbs but is considerably bigger than drivers normally used for that purpose. Proposed purpose is a 5s5p array (25 total) of 1 W LEDs. Driver comes with its own heatsink. | |
28W round mains driver |
DealExtreme $18.10 |
Mains driver | 85-265 V AC | 6-8 | 115 V or 230 V AC mains power | 1200 mA |
1 | 65 mm x 27 mm high | Output voltage 20-26 V. | |
2A driver |
FastTech $6.36 |
Step-down (non-buck) driver | 3.0-4.2 V | 1
1 LED included |
1x Li-ion | 2000 mA |
1 | 16 mm | Unknown regulation method - possibly none, just PWM. Unknown modes. Output voltage 3.2-3.8 V. Includes a Cree XM-L (T6 bin) cool white LED. |
|
2A driver |
FastTech $6.80 |
Step-down (non-buck) driver | 3.0-4.2 V | 1
1 LED included |
1x Li-ion | 2000 mA |
1 | 16 mm | Unknown regulation method - possibly none, just PWM. Unknown modes. Output voltage 3.2-3.8 V. Output voltage 3.2-3.8 V. Includes a Cree XM-L2 (T6 bin) cool white LED. |
|
2A driver |
FastTech $6.62 |
Step-down (non-buck) driver | 3.2-4.2 V | 1
1 LED included |
1x Li-ion | 2000 mA |
1 | 16 mm | Unknown regulation method - possibly none, just PWM. Unknown modes. Output voltage 3.2-3.8 V. Includes a Cree XM-L (T6 bin) cool white LED on a copper base. |
|
2A driver |
FastTech $5.96 |
Step-down (non-buck) driver | 3.2-4.2 V | 1
1 LED included |
1x Li-ion | 2000 mA |
1 | 16 mm | Unknown regulation method - possibly none, just PWM. Unknown modes. Output voltage 3.2-3.8 V. Includes a Cree XM-L (T6 bin) cool white LED on a copper base. |
|
2A driver |
FastTech $5.95 |
Step-down (non-buck) driver | 3.2-4.2 V | 1
1 LED included |
1x Li-ion | 2000 mA |
1 | 16 mm | Unknown regulation method - possibly none, just PWM. Unknown modes. Output voltage 3.2-3.8 V. Includes a Cree XM-L (T4 bin) warm white LED on a copper base. |
|
2x 1 W LED driver B350B12D1-2 |
Best Hong Kong $6.49 + shipping |
Buck driver | 12-12 V | 2 | 350 mA |
1 | 23 mm x 19 mm x 14 mm | |||
2x AMC7135 |
FastTech $1.42 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 700 mA |
1 | 17 mm | Linear regulator using 2x AMC7135 chips. Polarity protected. See extra AMC7135 notes below. |
2x AMC7135 |
FastTech $1.66 |
Linear regulator | 3.0-6.3 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 700 mA |
1 | 17 mm | Linear regulator using 2x AMC7135 chips. Polarity protected (assumed to be Schottky diode). See extra AMC7135 notes below. |
2x AMC7135 |
DealExtreme $2.92 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 50-97% | 700 mA |
1 | 17 mm | Go for the cheaper DX sku.26109 if you don't want the polarity protection diode. | |
2x AMC7135 (TR-025, |
DealExtreme $2.69 |
Linear regulator | 2.7-6.0 V (no polarity protection diode - see notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 700 mA |
1 | 17 mm | Buyer beware: As of September 2012 these are still being sent out with both 2xAMC7315 and 3xAMC7135. As of November 2012 (and maybe earlier) DX's description says 700 mA. Latest version: TR-025 (again). Three AMC7135 chips with space on the board for a fourth. Previously: Caution: The TR-0050 (also labelled as TR-0025) has replaced the TR-025. It is a different board and ships with only 2 or 3 AMC7135 chips and for some reason a capacitor between battery positive and battery negative. Does not have a polarity protection diode. See extra AMC7135 notes below. TR-025 (discontinued): Apparently a four AMC7135 linear current regulator but identifying marks have very roughly been removed for photos. Claims to provide different current outputs (1-1.2 A) to different Cree efficacy bins. I think NOT. |
2x AMC7135 on empty 20mm star board |
FastTech $1.32 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 700 mA |
1 | 20 mm star board | Linear regulator using 2x AMC7135 chips mounted on LED star. Polarity protected. See extra AMC7135 notes below. |
2x AMC7135, LED-120219 |
FastTech $1.32 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion 3x NiMH 3-4x alkaline |
50-97% | 700 mA |
1 | 17 mm | Linear regulator using 2x AMC7135 chips. Polarity protected, low voltage protection. See extra AMC7135 notes below. |
2x AMC7135 |
PCB Components $7.80 (approx) |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 670 mA |
1 | 17 mm | Linear regulator using two AMC7135 chips (thus the pictured driver is not this one). Note that the claimed input voltage doesn't allow for the polarity protection diode; the correct figures are listed in this table. See extra AMC7135 notes below. |
2x AMC7135 |
DealExtreme $20.18 for 20 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 700 mA |
1 | 17 mm | Linear regulator. Also see DX sku.26109. See extra AMC7135 notes below. |
3 Channel Controller for RGB LED Light Strip |
DealExtreme $6.40 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
19 | 42 mm x 13 mm x 3 mm | Three channel LED controller, maximum power switching 144 W, 4 A per channel. Multiple modes; 19 dynamic effects (5 speeds) plus circulatory display, 20 static colours (5 brightnesses). See DX sku.128425 for single channel version. | |
3 Channel Controller for RGB LED Light Strip |
DealExtreme $16.80 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
21 | 90 mm x 70 mm x 30 mm | Three channel LED controller, maximum power switching 144 W (12 V) or 288 W (24 V), 4 A per channel (12 A total) or 5 A maximum for a single channel. 21 modes. RF remote control. | |
3 channel LED strip controller |
DealExtreme $15.99 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 12 A |
1 | 105 mm x 60 mm x 20 mm | Colour temperature controller. 3 channel, maximum 4 A per channel. | |
3 LED boost |
CN Quality Goods $6.50 + shipping |
Boost driver | 6.0-8.4 V | 3 | 2x Li-ion | 1000 mA |
3 | 20 mm x 9 mm high - two boards in double layer | 3 mode; high, low, strobe. | |
3 mode |
DealExtreme $3.13 |
User interface driver | 2.8-4.2 V | 1 | 1x Li-ion | 1200 mA Can be modified to 1900 mA |
1 | 17 mm | 3 mode; high (100%), low (15%), strobe (9 Hz). Incomplete specifications - unknown regulation method, and unknown if direct drive when Vbat > Vf. Possibly just offers PWM mode control. Diameter figure in title inconsistent with listed dimensions (16 mm). | |
3 mode boost board |
DealExtreme $3.76 |
Boost driver | 5.0-8.4 V | 3 | 2x Li-ion | 800 mA |
3 | 20 mm x 8 mm high - two boards in double layer | Three mode; high, low, strobe. Variable output current. 800-1000 mA claimed. | |
3 mode boost(?) board |
DealExtreme $3.30 for 2 |
Boost driver | 1.5-3.0 V | 1 | 2x AA | 700 mA |
3 | 15 mm | 3 modes without memory; high, medium, fast strobe. Output current said to be 700-800 mA. | |
3 mode, 700 mA |
KaiDomain $3.40 |
Step-down (non-buck) driver | 3.7-4.2 V | 1 | 700 mA |
1 | 17 mm | Very incomplete specs given, and specs given in the title are bad (mA/h is non-sensical). Three modes with no mode memory; low (unknown %), high, strobe. Formerly product ID 9263. |
||
3 W - 6 W mains driver |
DealExtreme $10.85 |
Mains driver | 100-240 V AC | 1-3 | 115Â V or 230Â V AC mains power | 700 mA |
1 | 45 mm x 40Â mm x 20Â mm | Enclosed in white box, presumed transformer with buck regulator. Constant current out 700 mA @ 3-12 V. | |
3 W Buck, 5 mode |
DealExtreme $3.45 |
Buck driver | 3.6-8.4 V | 1 | 3-6x NiMH, |
1000 mA |
5 | 17 mm - two boards in double layer | Buck driver using PWM for modes, although what exactly the modes are seems to vary - high, low, slow strobe, fast strobe, and either SOS or beacon (1 flash every 8 or 10 seconds). High is 700-1000 mA depending on input voltage. Apparently based on PT4105 chip - see separate notes below - and may be able to cope with higher input voltage. | |
3 W PWM Step-down, 5 mode |
DealExtreme $2.70 for 2 (formerly $2.38) |
Step-down (non-buck) driver | 3.6-3.6 V | 1 | 3x NiMH, 1x Li-ion |
1000 mA |
5 | 16 mm | Unknown regulation method; no inductor so assumed to be just PWM, possibly with output smoothing using a capacitor. 5 modes, 3 of which are flashing; high, low, slow strobe, fast strobe, SOS. However, reviewers describe different sets of modes, such as high, medium, low, strobe, SOS; or high, low, slow strobe, fast strobe, 10 second beacon flash. Photos posted show a different IC to DX's photos. Tip: This board may possibly operate as a straight-forward PWM driver if the capacitor is removed. |
|
3 x 2W mains driver |
Focalprice $3.29 |
Mains bulb driver | 85-265 V AC | 2-3 | 115 V or 230 V AC mains power | 88% | 450 mA |
1 | 23 mm x 17 mm x 15 mm | Output voltage 6.0-11.5 V. Title and label in photo say 450 mA but description says 300 mA - buyer beware. Efficiency is manufacturer claimed maximum, typical efficiency unknown. |
3*1W LED Driver Adapter |
DealExtreme $10.10 |
Mains driver | 85-260 V AC | 3-4
3 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 9-14 V. Output current listed here is a guess. 3 warm white LEDs included (in a wood grain coloured downlight; cool white and "coffee" versions also available) |
||
3*AMC7135 |
Intl Outdoor Store $6.95 + shipping |
Linear regulator | 2.9-4.5 V (for possibly 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
66-97% | 1050 mA |
4 | 17 mm | Driver removed from site. Linear regulator using three AMC7135 chips and a micro controller for PWM mode control. 4 modes with memory; firefly (3-4 mA), medium (200 mA), high, strobe. Modes are changed normally (forward clicky recommended) or by using a code to select the mode you want. Polarity protection. Low voltage protection; at 3.3V the current will drop to 2 mA, and switches off within 3 seconds of hitting ~2.9 V - unclear if this is a designed feature or just the way the AMC7135 works. PWM speed >4 kHz. Comes with spring on positive terminal and a ground wire on the top of the board. See extra AMC7135 notes below. My thoughts: This driver seems quite expensive just to get a fiddly way of changing modes. Maybe it'll serve someone well, but with only 4 modes, changing modes normally with a reverse clicky would require just as many button pushes on average and require less thinking. Changing to firefly mode when the battery voltage drops to 3.3 V is unnecessarily conservative - from the last Li-ion cells I tested it would be at just under half their capacity. |
3*AMC7135 |
Intl Outdoor Store $6.95 |
Linear regulator | 2.9-4.5 V (for possibly 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
66-97% | 1050 mA |
2 | 17 mm | Driver removed from site. Linear regulator using three AMC7135 chips and a micro controller for PWM mode control. 2 modes with memory; ramping mode (user settable 1-100%), strobe. PWM frequency 3.7 kHz. Low voltage protection; at 3.3V the current drops to 8mA and turns off when it gets to ~2.9 V - unclear if this is a designed feature or just the way the AMC7135 works. Comes with spring on positive terminal. |
3-5W mains driver |
DealExtreme $2.90 |
Mains driver | 85-265 V AC | 3-5 | 115 V or 230 V AC mains power | 330 mA |
1 | 42 mm x 17 mm x 13 mm | Chipset FSEZ1317. Output voltage not stated; assumed to be around 8-16 V. | |
3-CH Manual RGB LED Strip Dimmer |
DealExtreme $18.00 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 9 A |
1 | 129 mm x 40 mm x 30 mm | 3 channels, maximum 3 A per channel. Each channel has its own rotary control. | |
3-mode Double Protection Torch Circuit Driver V9 |
CN Quality Goods $12.00 + shipping |
Step-down (non-buck) driver | 5.5-15 V | 1 | 3000 mA |
1 | 21 mm x 12 mm high - two boards in double layer | Top board diameter 19 mm. PWM frequency 700 Hz. Thermal protection. Low voltage protection (I think that's what "run multhium battery protection" means). | ||
3.0 A, 100 W mains driver |
DealExtreme $24.16 |
Mains driver | 85-265 V AC | 10-12 | 115 V or 230 V AC mains power | 3000 mA |
1 | 120 mm x 55 mm x 35 mm | Output voltage 32-36 V. | |
3.6-9 V, 800 mA Regulated IC Circuit Board |
Shining Beam $5.25 for 2 + shipping |
Buck driver | 3.6-9.0 V | 1 | 800 mA |
1 | 16 mm | Stupidly, this driver completely vanishes from the retailer's web site when temporarily out of stock. SKU 1060. Buck driver. Unknown driver chip. |
||
3.7~4.25V, 5 mode LED driver |
DealExtreme $4.20 for 2 |
User interface driver | 3.7-4.3 V | 1 | 1x Li-ion |
|
1 | 17 mm | Product removed from site. Details lack any mention of output current; assumed to be PWM only (no current limiting). No maximum limit stated. 5 mode; high, medium, low, fast strobe, SOS. |
|
30W 12V boost driver |
DealExtreme $13.99 |
Boost driver | 12-12 V | 5-6 | 1800 mA |
1 | 76 mm x 37 mm x 11 mm | Output voltage 16-20 V. "Compatible with 5 x 6 or 6 x 6 LED plate". Includes driver heatsink. | ||
30W boost driver |
DealExtreme $11.40 |
Boost driver | 12-34 V | 10-12 | 12 V or 24 V automotive | 950 mA |
1 | 75 mm x 50 mm x 20 mm | Output voltage 35-38 V. Includes driver heatsink. | |
30W boost driver |
DealExtreme $12.20 |
Boost driver | 9-15 V | 5 | 3x Li-ion, 12 V automotive |
1800 mA |
1 | 70 mm x 50 mm x 19 mm | Output voltage 16-18 V. Includes driver heatsink. | |
30W boost driver |
DealExtreme $10.60 |
Boost driver | 12-28 V | 9-11 | 12 V or 24 V automotive | 1000 mA |
1 | 60 mm x 36 mm x 14 mm | Output voltage 30-36 V. Includes driver heatsink. | |
30W Boost/Buck |
KaiDomain $14.99 |
Boost driver and buck driver | 3.0-18 V | 1-4 | 2-4x Li-ion | 2800 mA |
5 | 26 mm x 17mm high - two boards in double layer | Output current varies from claimed 5 A for 1 LED (which disagrees with the claimed 8-10 W) to 3 A for 3-4 LEDs. However, 2.8 A is also claimed by sales staff answering two separate thread questions - buyer beware. 5 modes with memory; high, medium, low (no mention of ratios/duty cycle), strobe, SOS. Low voltage protection at 5.7 V, thermal protection (heatsinking possibly required). | |
30W Boost/Buck |
KaiDomain $14.99 |
Boost driver and buck driver | 3.0-18 V | 1-4 | 2-4x Li-ion | 2800 mA |
3 | 26 mm x 17mm high - two boards in double layer | Output current varies from claimed 5 A for 1 LED (which disagrees with the claimed 8-10 W) to 3 A for 3-4 LEDs. However, 2.8 A is also claimed by sales staff answering a thread question - buyer beware. 3 modes with memory; low, medium, high (no mention of ratios/duty cycle). Low voltage protection at 5.7 V, thermal protection (heatsinking possibly required). | |
30W mains driver |
DealExtreme $19.26 |
Mains driver | 85-265 V AC | 9-11 | 115 V or 230 V AC mains power | 88% | 1000 mA |
1 | 111 mm x 47 mm x 30 mm | Output voltage 30-36 V. Includes driver heatsink. |
30W mains driver |
FastTech $11.09 |
Mains driver | 85-265 V AC | 10 | 115 V or 230 V AC mains power | 1000 mA |
1 | 89 mm x 48 mm x 32 mm | Output voltage 32-36 V. | |
30W mains driver |
DealExtreme $17.80 |
Mains driver | 100-240 V AC | 8-12 | 115 V or 230 V AC mains power | 1000 mA |
1 | 119 mm x 38 mm x 25 mm | Output voltage 26-36 V. IP67 dust/water rating. | |
30W mains driver |
DealExtreme $7.35 |
Buck driver | 86-265 V | 10-12 | 115Â V, 230Â V AC mains power | 900 mA |
1 | 95 mm x 39 mm x 24 mm | Output voltage 30-36 V. | |
30W, 10S3P mains driver |
DealExtreme $15.99 |
Mains driver | 90-265 V AC | 8-12 | 115 V or 230 V AC mains power | 88% | 900 mA |
1 | 125 mm x 37 mm x 24 mm | Output voltage 24-36 V. Dust/water rating IP67. |
315 mA, 10 W mains driver |
DealExtreme $4.10 |
Mains bulb driver | 90-265 V AC | 8-10 | 115 V, 230 V AC mains power | 90% | 315 mA |
1 | 35 mm x 15 mm x 15 mm | Output voltage 25-30 V. Claimed minimum efficiency listed here. Assumed to be a GU10/E27 driver because of the description "Suitable for common spotlight, and ball lamp cup". |
315 mA, 9 W mains driver |
DealExtreme $4.00 |
Mains bulb driver | 90-265 V AC | 8-10 | 115 V, 230 V AC mains power | 90% | 315 mA |
1 | 35 mm x 15 mm x 15 mm | Output voltage 25-30 V. Claimed minimum efficiency listed here. Assumed to be a GU10/E27 driver because of the description "Suitable for common spotlight, and ball lamp cup". |
320 mA, 12 W mains driver |
DealExtreme $9.90 |
Mains bulb driver | 90-265 V AC | 9-12 | 115 V or 230 V AC mains power | 90% | 300 mA |
1 | 53 mm x 35 mm x 15 mm | Updated specs: Output voltage 25-30 V. Driver has 9-12 written on it - presumably the number of LEDs this driver is intended for, but that doesn't quite correspond with the stated output voltage. Previously: Output current 1100 mA. Output voltage 8-11 V (3 LEDs). Claimed output current 1.1-1.5 A, which is an unusually large range for a mains driver. Claimed minimum efficiency listed here. |
330mA MR16 driver |
FastTech $1.48 |
MR16 (buck) driver | 12-17 V DC; also works with AC | 1-3 | 12 V AC or DC | 91-92% | 330 mA Can be modified to 1000 mA |
1 | 18 mm x 14 mm x 10 mm | Uses CL6807 driver chip (see notes on CL6807 below). Efficiency figures driving 2-3 LEDs with rectifier diodes bypassed. |
330mA MR16 driver for red/yellow LEDs |
FastTech $2.65 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1 | 12 V AC or DC | 330 mA |
1 | 13 mm x 13 mm x 12 mm | Output current is assumed. Said to be for red and yellow LEDs; no mention of output voltage. | |
350~700mA LED boost driver |
DealExtreme $2.90 for 2 |
Boost driver | 1.5-3.0 V | 1 | 2x AA | 350 mA |
1 | 15 mm | Output current said to be 350-700 mA, probably depending on input voltage. It's unclear if it'll run with a single AA cell. | |
35x1W mains driver |
FastTech $16.36 |
Mains driver | 100-240 V AC | 35 | 115Â V, 230Â V AC mains power | 320 mA |
1 | 180 mm x 37 mm x 29 mm | Output voltage 105-126 V. Note that this voltage represents a serious shock hazard - use with extreme caution. | |
3A buck driver |
FastTech $7.97 |
Buck driver | 5.5-15 V | 1 | 2-3x Li-ion | 3000 mA |
5 | 21 mm x 10 mm high - two boards in double layer | 5 modes with memory; low (10%), medium (50%), high (100%), strobe, SOS. Disappointingly slow PWM frequency, 122 Hz. Low voltage warning and protection. | |
3A Circuit Driver for Bike Light |
KaiDomain $12.99 |
Buck driver | 6.0-15 V | 1 | 3000 mA |
1 | 26 mm x 14mm high - two boards in double layer | Thermal protection. | ||
3A, 3 mode driver |
KaiDomain $25.66 for 5 |
Buck driver | 8.4-12 V | 1 | 3000 mA |
1 | Said to be suitable for Cree XM-L. Probably the same as DX sku.57779. Formerly product ID 11384. |
|||
3A, 3 mode driver |
DealExtreme $5.79 |
Buck driver | 6.0-18 V | 1-3 | 71-91% | 2800 mA |
3 | 22 mm x 14 mm high - two boards in double layer | 3 modes; high, low, fast strobe. Regulation appears to be reasonably good. Modification for single mode and test results for 1 to 3 LEDs are on CPF here. An alternative is DX sku.128269. | |
3A, 3 mode LED driver |
ledsupermall.com $6.60 |
Buck driver | 5.5-15 V | 1 | 90-95% | 3000 mA |
3 | 19 mm x 8 mm high | 3 modes; low (10%), high, medium (35%). Recommended use with maximum 12 V input. | |
3A, 3 mode LED driver |
ledsupermall.com $5.10 |
Buck driver | 8.4-12 V | 1 | 3000 mA |
3 | 22 mm x 14 mm high - two boards in double layer | Incomplete specs - buyer beware. Possibly the same as DX sku.57779 (which is cheaper). Size listed here assumes that. | ||
3A, 5 mode (V10+ brand) |
FastTech $5.99 |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion | 3000 mA |
5 | 17 mm x 10 mm high - two boards in double layer | 5 modes with memory; high, medium, low, strobe, SOS. Alternate group with no flashing modes accessed by half press. | |
3A, 8 mode incl ramping (V10+ brand) |
FastTech $6.19 |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion | 3000 mA |
8 | 17 mm x 10 mm high - two boards in double layer | 8 modes in 4 groups, with memory; medium (30%), beacon strobe (10 Hz twice, 2-second pause), fast strobe (7 Hz), SOS. Alternate groups with no flashing modes accessed by half press. | |
3s3p dimmable mains driver |
DealExtreme $4.68 |
Mains driver | 96-265 V AC | 3
1 LED included |
115Â V, 230Â V AC mains power | 630 mA |
1 | 29 mm x 20 mm x 1 mm | Output voltage 9-11 V. The claimed thickness of 1 mm is unlikely to be correct. One warm white 3s3p LED plate included. |
|
3W (600mA) mains driver |
DealExtreme $2.40 |
Mains bulb driver | 90-265 V AC | 1 | 115 V or 230 V AC mains power | 70% | 600 mA |
1 | 24 mm x 15 mm x 15 mm | Output voltage 2.2-4.0 V. |
3W driver |
FastTech $3.98 |
Buck driver | 3.0-4.2 V | 1
1 LED included |
1x Li-ion | 700 mA |
1 | 20 mm | Output voltage 3.2-3.8 V. Note: This driver has the same specs as FT sku.1677800, just no photos. Includes a Cree XR-E (Q3 bin) cool white LED. |
|
3W E27/GU10 driver |
DealExtreme $3.10 |
Mains bulb driver | 90-265 V AC | 3 | 115 V or 230 V AC mains power | 90% | 315 mA |
1 | 54 mm x 28 mm x 23 mm | Output voltage 8-11 V. Stated as being suitable for E27 or GU10 bulbs but it's significantly larger than the typical size for those drivers. |
3W GU10 mains driver |
DinoDirect $3.99 |
Mains bulb driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 650 mA |
1 | "0.89 x 0.59 x 0.59 in". | ||
3W LHD(?) grey case |
DealExtreme $15.40 |
Mains driver | 220-240 V AC | 3
3 LEDs included |
230 V AC mains power | 330 mA |
1 | Output current is a guess. 3 red LEDs included (in a fancy acrylic downlight). Also available in green for a little more. |
||
3W lighting driver |
FastTech $1.52 |
MR16 (buck) driver | 12-17 V DC; also works with AC | 1-3 | 12 V AC or DC | 610 mA Can be modified to 1000 mA |
1 | 17 mm | Uses PT4115 driver chip (see notes on PT4115 below) with SS14 Schottky diodes and a 220µF capacitor. | |
3W main driver |
DealExtreme $3.50 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 85% | 300 mA |
1 | 45 mm x 30 mm x 20 mm | Output voltage 9-12 V. Driver length is a guess. |
3W mains driver |
DealExtreme $2.70 |
Mains bulb driver | 90-265 V AC | 3 | 115 V or 230 V AC mains power | 90% | 320 mA |
1 | 25 mm x 15 mm x 15 mm | Output voltage 10-12V. Incomplete specifications given, output current is guess - buyer beware. Claimed minimum efficiency listed here. This was formerly listed by DX as an 8.4W driver providing 675 mA. |
3W mains driver |
DealExtreme $3.20 |
Mains bulb driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 675 mA |
1 | 40 mm x 28 mm x 24 mm | Output voltage 2.5-4.0 V. Said to be suitable for E27 or GU10 bulbs but it's bigger than drivers usually are for that. | |
3W mains driver |
DealExtreme $2.84 |
Mains bulb driver | 90-265 V AC | 1 | 115 V or 230 V AC mains power | 90% | 1000 mA |
1 | 25 mm x 15 mm x 15 mm | November 2011: Output voltage 3-4 V. The claimed output current of 1000 mA is higher than the normal ~700 mA for "3W" LEDs - buyer beware. Previously: 675mA. Photo shows 1*3W but DX's supplier claims output voltage 10-12 V - buyer beware. Claimed minimum efficiency listed here. |
3W mains driver with LED |
DealExtreme $3.90 |
Mains driver | 100-240 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 650 mA |
1 | Output current is estimate only. Includes 1 LED on a 20 mm aluminium star board. |
||
3W mains driver with LEDs |
DealExtreme $5.70 |
Mains driver | 100-240 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | Output current is estimate only. Includes 3 LEDs on a 31 mm diameter aluminium board. |
||
3W mains driver with LEDs |
DealExtreme $4.50 |
Mains driver | 100-240 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | Output current is estimate only. Includes 3 LEDs on a 25 mm diameter aluminium board. |
||
3x 1 W LED driver B350B12D1-3 |
Best Hong Kong $6.95 + shipping |
Buck driver | 12-12 V | 3 | 350 mA |
1 | 23 mm x 19 mm x 14 mm | Output voltage range is so tight it can't be used to drive three red or amber LEDs. | ||
3x 1W, yellow case |
DealExtreme $16.70 |
Mains driver | 85-240 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 320 mA |
1 | Output current is assumed. 3 warm white LEDs included (in an aluminium downlight). |
||
3x 3 W LED driver B700B12D3-3 |
Best Hong Kong $7.95 + shipping |
Buck driver | 12-12 V | 3 | 700 mA |
1 | 23 mm x 19 mm x 14 mm | Output voltage range is so tight it can't be used to drive three red or amber LEDs. | ||
3x AMC7135 |
FastTech $1.70 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1050 mA |
1 | 17 mm | Linear regulator using 3x AMC7135 chips. Polarity protected. See extra AMC7135 notes below. |
3x AMC7135 |
FastTech $2.26 |
Linear regulator | N/A | 1 | 1050 mA |
5 | 17 mm | 3 + 5 modes in two groups, but no indication of currents; low, medium, high; low, medium, high, strobe, SOS. A user of the 8x AMC7135 version (8727400) says it has memory. There's no indication of what the "2800mAh" in the title refers to. |
||
3x AMC7135 (Nanjg AK-47A) |
DealExtreme $3.71 |
Linear regulator | 3.0-4.5 V | 1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
5 | 17 mm | Linear regulator using three AMC7135 chips and a ATtiny13V for PWM mode control. 5 modes with memory, with solder pads allowing different mode groups to be selected; low (5%), medium (30%), high, fast strobe, SOS. This is more expensive than the apparently identical DX sku.6190. A slightly cheaper version without memory is DX sku.127686. See extra AMC7135 notes below or this CPF thread. |
3x AMC7135 |
DealExtreme $2.36 |
Linear regulator | 2.7-6.0 V (no polarity protection diode - see notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1050 mA |
1 | 15 mm | Buyer beware - DX has changed this driver several times. Linear regulator, apparently a Originally claimed to provide different current outputs (0.7-1 A) to different Cree efficacy bins. I think NOT. |
3x AMC7135, "random brightness" |
CN Quality Goods $7.50 + shipping |
Linear regulator | 3.0-6.0 V | 1 | 1x Li-ion 3x NiMH |
1050 mA |
3 | 17 mm | The description for how this thing works is a big fat lost-in-translation mystery. Possibly 3 modes; programmed brightness, strobe, random mode (can be set to any brightness 0-100%). There's also a "tactical mode" mentioned which involves a half press... of what? Two-stage low voltage protection; with poor quality Li-ion cells the first stage (output drops to 8 mA) will cut in at less than 2/3 the battery capacity. Polarity protection. See extra AMC7135 notes below. | |
3x AMC7135, 16 mode |
KaiDomain $4.08 |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
16 | 17 mm | Uses three AMC7135 linear regulator chips and possibly an ATtiny13V for PWM modes; 16 modes in 3 groups, including one with no flashing modes. Claimed in different places to be both 16 and 17 modes. Space on the board for a 4th AMC7135. Appears to be exactly the same as KD S009743, which is cheaper. See extra AMC7135 notes below. Formerly product ID 1677. |
3x AMC7135, 16 or 17 mode |
KaiDomain $3.27 each |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
16 | 17 mm | Uses three AMC7135 linear regulator chips and possibly an ATtiny13V for PWM modes; 16 modes in 3 groups, including one with no flashing modes. Claimed in different places to be both 16 and 17 modes. Space on the board for a 4th AMC7135. Appears to be exactly the same as KD S003214, which is more expensive. Formerly product ID 10996. Also available in a 5 pack, S009744 (formerly product ID 10997). |
3x AMC7135, 19 mode |
KaiDomain $4.99 |
Linear regulator | 2.7-5.5 V | 1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
19 | 17 mm | Linear regulator using three AMC7135 chips and a PWM mode controller. Claimed 19 modes in 3 groups. Note that the pictures provided are of a standard 3x AMC7135 board with no mode controller - buyer beware - hence unknown polarity protection; input voltages stated here are without that diode, and the typical 5.5 V maximum for a microprocessor mode controller. See extra AMC7135 notes below. Formerly product ID 1696. |
3x AMC7135, 2 mode |
KaiDomain $3.68 each |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
2 | 17 mm | Linear regulator board using 3 AMC7135 chips and a microcontroller for PWM modes; high, low (15%). Mode memory. Alternate mode groups may be selectable by using the star-shaped contacts, as detailed here. A review is here. See extra AMC7135 notes below. Formerly product ID 1801. Also available in a 5 pack, S004660 (formerly product ID 1802). Also available in a 20 pack, S006268 (formerly product ID 6052), but with the low mode possibly just 50 mA (a detail which has been lost with KD's last site update). |
3x AMC7135, 5 mode |
CN Quality Goods $7.50 + shipping |
Linear regulator | 3.0-6.0 V | 1 | 1x Li-ion 3x NiMH |
1050 mA |
4 | 17 mm | 4 modes; low (3-4 mA), medium (200 mA), high, strobe. Two-stage low voltage protection; with poor quality Li-ion cells the first stage (output drops to 2 mA) will cut in at less than 2/3 the battery capacity. Polarity protection. See extra AMC7135 notes below. | |
3x AMC7135, 5 mode |
FastTech $1.82 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1050 mA |
5 | 17 mm | Linear regulator using 3x AMC7135 chips. 5 modes; high, medium, low, strobe, SOS. Polarity protected. See extra AMC7135 notes below. |
3x AMC7135, 5 mode |
DealExtreme $3.70 |
Linear regulator | 3.0-4.5 V | 1 | 3x NiMH, 4x alkaline, 1x Li-ion |
1050 mA |
5 | 17 mm | Linear regulator using three AMC7135 chips with an MCU for PWM modes and a polarity protection diode. 5 mode; high, medium, low, strobe, SOS. | |
3x AMC7135, 5 mode |
KaiDomain $3.50 |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
5 | 17 mm | Linear regulator using three AMC7135 chips (formerly listed as having four) and an ATtiny13A for PWM mode control. Five modes - high, medium, low, strobe, SOS. Alternate mode groups can be selectable by using the star-shaped contacts, as detailed here. See extra AMC7135 notes below. Formerly product ID 9605. |
3x AMC7135, 5 mode |
Intl Outdoor Store $3.35 |
Linear regulator | 3.2-4.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
62-97% | 1050 mA |
5 | 17 mm | Linear regulator using three AMC7135 chips and a ATtiny13A for PWM mode control; PWM frequency >4500 Hz. 5 modes with memory; low (5%), medium (30%), high, strobe, SOS. Alternate mode groups can be selected by using the star-shaped contacts; low/high/strobe, low/medium/high, low (10%)/high. Low voltage warning at 2.9-3.0 V. See extra AMC7135 notes below. |
3x AMC7135, 5 mode |
FastTech $2.70 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1050 mA |
5 | 17 mm | Linear regulator using 3x AMC7135 chips. 5 modes in 4 groups. Polarity protected. See extra AMC7135 notes below. |
3x AMC7135, 5 mode |
DealExtreme $2.83 |
Linear regulator | 3.0-4.5 V | 1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
5 | 17 mm | Update September 2015: These are reported to now have an ascending mode order. Three AMC7135 chips with a chip to provide PWM modes. 5 modes without memory, with solder pads allowing different mode groups to be selected; high, medium (30%), low (5%), strobe, SOS. (Note the descending order.) There is a 2 mode group of high and low (10%). Polarity protected. Alternative is DX sku.127689 (ascending mode order with memory). See extra AMC7135 notes below or this CPF thread. |
3x AMC7135, 5 mode |
Intl Outdoor Store $2.83 |
Linear regulator | 2.9-4.5 V | 1 | 3x NiMH 1x Li-ion |
1050 mA |
5 | 20 mm | Driver removed from site. Linear regulator using three AMC7135 chips and a ATtiny13A or similar providing PWM modes; PWM frequency >4.5 kHz. 5 modes with "several hour" memory, with solder pads allowing different mode groups to be selected; low (5%), medium (30%), high, strobe, SOS. Alternate mode groups can be selected by using the star-shaped contacts; low/high/strobe, low/medium/high, low (10%)/high. Low voltage protection at 2.8 V. See extra AMC7135 notes below. |
|
3x AMC7135, LED-120219 |
FastTech $1.40 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion 3x NiMH 3-4x alkaline |
50-97% | 1050 mA |
1 | 17 mm | Linear regulator using 3x AMC7135 chips. Polarity protected, low voltage protection. See extra AMC7135 notes below. |
3x AMC7135, LEDROAD LED-150603 |
FastTech $1.56 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion 3x NiMH 3-4x alkaline |
50-97% | 1050 mA |
1 | 20 mm | Linear regulator using 3x AMC7135 chips. Polarity protected, low voltage protection. See extra AMC7135 notes below. |
3x AMC7135 |
PCB Components $10.30 (approx) |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1050 mA |
1 | 17 mm | Linear regulator using three AMC7135 chips (thus the pictured driver is not this one). Note that the claimed input voltage doesn't allow for the polarity protection diode; the correct figures are listed in this table. See extra AMC7135 notes below. |
3x AMC7135 |
DealExtreme $2.90 |
Linear regulator | 3.0-6.3 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1050 mA |
1 | 17 mm | Linear regulator with three AMC7135 chips. Polarity protection assumed to be using a Schottky diode (providing 0.3 V drop). |
3x AMC7135 |
Focalprice $1.49 |
Linear regulator | 2.7-6.0 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1050 mA |
1 | 15 mm | Linear regulator using three AMC7135 chips. No polarity protection. |
3x1W |
DealExtreme $20.60 |
Mains driver | 95-265 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 350 mA |
1 | Incomplete specs - output current listed is a guess. 3 white LEDs included (in a fancy acrylic downlight). |
||
3x1W 220V |
DealExtreme $16.00 |
Mains driver | 220-240 V AC | 3
3 LEDs included |
230 V AC mains power | 330 mA |
1 | Output current 310-350 mA. 3 LEDs included (in a fancy copper coloured holder) - cool white. |
||
3x1W blue label |
DealExtreme $17.40 |
Mains driver | 85-265 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Incomplete specs - output current listed is a guess. 3 white LEDs included (in a fancy acrylic downlight). |
||
3x1W dimmable mains driver |
DealExtreme $3.20 |
Mains driver | 220-240 V AC | 3 | 230 V AC mains power | 85% | 290 mA |
1 | 52 mm x 27 mm x 22 mm | Output voltage around 10 V. Claims to be dimmable; for the price I seriously doubt it. |
3x1W dimmable mains driver |
DealExtreme $6.31 for 5 |
Mains bulb driver | 110-120 V AC | 3 | 115Â V AC mains power | 80% | 300 mA |
1 | 24 mm x 18 mm x 11 mm | Output voltage 9-10 V. Dimmable. |
3x1W mains driver |
goodluckbuy.com $3.53 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 320 mA |
1 | Product removed from retailer's site. Output voltage 8-12 V. |
||
3x1W mains driver |
FastTech $2.92 |
Mains bulb driver | 220-240 V AC | 3 | 230 V AC mains power | 300 mA |
1 | 23 mm x 17 mm x 14 mm | Output current is assumed; the "current draw" figure is nonsense. | |
3x1W mains driver |
FastTech $1.94 |
Mains bulb driver | 85-245 V AC | 3 | 115 V or 230 V AC mains power | 350 mA |
1 | 23 mm x 16 mm x 14 mm | ||
3x1W mains driver |
DealExtreme $2.90 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 280 mA |
1 | 38 mm x 28 mm 23 mm | Output current 280 mA on driver, 300 mA in description. Output voltage 12 V on driver, 8-10 V in description. | |
3x1W mains driver |
DealExtreme $3.44 |
Mains driver | 85-265 V AC | 1-4 | 115 V or 230 V AC mains power | 300 mA |
1 | 54 mm x 27 mm x 22 mm | Output voltage 3-12 V. | |
3x1W mains driver |
DealExtreme $3.78 |
Mains bulb driver | 100-240 V AC | 3 | 115 V or 230 V AC mains power | 300 mA |
1 | 26 mm x 17 mm x 13 mm | Output current is a guess. Output voltage range unknown. | |
3x1W mains driver |
FastTech $1.78 |
Mains bulb driver | 220-240 V AC | 3 | 230 V AC mains power | 90% | 300 mA |
1 | 25 mm x 18 mm x 15 mm | Output voltage 9-11 V. |
3x1W mains driver for red/yellow LEDs |
FastTech $3.62 |
Mains bulb driver | 85-245 V AC | 3 | 115 V or 230 V AC mains power | 330 mA |
1 | 23 mm x 16 mm x 14 mm | ||
3x1W MR16 driver |
FastTech $1.49 |
MR16 (buck) driver | 12-17 V DC; also works with AC | 1-3 | 12 V AC or DC | 330 mA Can be modified to 1000 mA |
1 | 15 mm x 15 mm x 10 mm | Uses CL6807 driver chip (1A max, 0.1V sense voltage, dimming pin). | |
3x1W MR16 driver |
DealExtreme $1.50 |
MR16 (buck) driver | 8.0-12 V DC; also works with AC | 3 | 12 V AC or DC | 75% | 300 mA |
1 | 27 mm x 17 mm x 9 mm | Output voltage not stated, probably 8-11 V. Removed from website. |
3x2W dimmable mains driver |
DealExtreme $4.92 |
Mains bulb driver | 220-240 V AC | 3 | 230 V AC mains power | 420 mA |
1 | 32 mm x 20 mm x 17 mm | Dimmable. Output voltage ~10V. | |
3x2W mains driver |
FastTech $1.90 |
Mains bulb driver | 90-265 V AC | 3 | 115 V or 230 V AC mains power | 450 mA |
1 | 30 mm x 17 mm x 11 mm | Output voltage 8-12 V. | |
3x3W mains driver |
DealExtreme $3.46 |
Mains bulb driver | 90-250 V AC | 3 | 115Â V, 230Â V AC mains power | 80% | 750 mA |
1 | 35 mm x 18 mm x 18 mm | Output voltage 9-11 V. |
3x AMC7135, 17 mode (formerly 16 mode) |
DealExtreme $3.60 |
Linear regulator | 3.0-5.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
17 | 17 mm | Update Nov 2012: Two different versions of this driver are being shipped, a 101-AK-A1 and an AK-47A with the four star contacts like DX sku.127689. The functionality might be unchanged. Linear regulator using three AMC7135 chips and a PWM mode controller (ATtiny13V running the PWM at 4.7 kHz); includes a group with three well-spaced modes and no flash or strobe! Now with 17 modes. I got slightly different timing on the third group though, and call them different things - low (10%), medium (35%), high (100%), fast strobe, police strobe, beacon (1 flash per 3.5 sec), fast beacon (1 flash per 1.4 sec), slow beacon (1 flash per 11 sec), SOS (1 set per 11 sec). The latest boards have an empty space all ready for a 4th AMC7135. They may also have low battery detection - see here. See extra AMC7135 notes below. Tip 3: Methods for wiring this board in parallel with another AMC7135 board are described here, with lots of colourful diagrams. Tip 4: Modes can be disabled by following the instructions in this thread. |
3x AMC7135, 19 mode (Nanjg 15) |
e-lectronics.net $4.50 + shipping |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1050 mA |
19 | 17 mm | Formerly 2 mode. Linear regulator board using three AMC7315 chips and probably a PIC12F629 for PWM mode control. Has a group with high/medium/low without flash or strobe. Low mode 120 mA. Note that the claimed input voltage doesn't allow for the polarity protection diode, which is confirmed by the mention that it operates best over 3.5 V; the more likely correct figures are listed in this Driver List table. See extra AMC7135 notes below. |
3x AMC7135, 20 mode (LDCH) |
DealExtreme $3.95 |
Linear regulator | 3.0-5.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
20 | 17 mm | Linear regulator using three AMC7135 chips and a PWM mode controller. See extra AMC7135 notes below. |
3x AMC7135, 3 mode |
KaiDomain $3.75 |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
3 | 17 mm | Uses three AMC7135 linear regulator chips and ATtiny13V for PWM modes - low, medium, high according to gunga, not the other way around. Is not 1.2 A output as claimed, but you might get 1.1 A. Changing the mode group may also be possible using the contacts on the bottom of the driver board. See extra AMC7135 notes below. Formerly product ID 1694 and 8020. |
3x AMC7135, 5 mode |
DealExtreme $3.62 |
Linear regulator | 3.0-4.5 V | 1 | 3x NiMH 1x Li-ion |
50-97% | 1050 mA |
5 | 17 mm (maybe 15Â mm - see tip 3) | Linear regulator using three AMC7135 chips and a ATtiny13V for PWM mode control. 5 modes with memory; the claimed high, medium (35%), low (20%), strobe, SOS is actually low (5%), medium (30%), high, strobe, SOS according to brted's review and harlxw's test results (in the same thread), which means it appears to be the same as DX sku.127689 except cheaper. A version without memory is DX sku.127686. Alternate mode groups can be selected by using the star-shaped contacts, as detailed here. Unknown why maximum voltage is specified at only 4.5 V instead of 5.5 V for the ATtiny13V (5.8 V with a Schottky polarity protection diode). See extra AMC7135 notes below or this CPF thread. Tip 3: One user reports he was able to sand it down to 15 mm diameter. |
3x AMC7135 |
DealExtreme $16.58 for 10, also available in 20 pack |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1050 mA |
1 | 17 mm | Linear regulator with three AMC7135 linear regulator chips and a silicon polarity protection diode (0.6 V drop on the chip enable pin). This board comes with one AMC7135 connected and the other two just needing small solder bridges - very useful for using a switch instead of the solder bridges to change from 1/3 amp to 2/3 amp or 1 amp. The solder bridges are the yellow dots in this picture by PaulH (see CPF thread). Also (formerly) available as a 20 pack. See extra AMC7135 notes below. |
4 channel, RGBW LED strip controller |
DealExtreme $19.86 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 16 A |
1 | 86 mm x 86 mm x 36 mm | 4 channel, maximum 4 A per channel. Touch panel control. | |
4 channel, RGBW LED strip controller |
DealExtreme $8.57 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 125 mm x 55 mm x 7 mm | 4 channel, maximum 2 A per channel. IR remote control. The stated dimensions are probably of the remote control. | |
4 channel, RGBW LED strip controller |
DealExtreme $18.99 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC mains power | 24 A |
12 | 110 mm x 52 mm x 20 mm | 4 channel, maximum 6 A per channel. Touch panel RF remote control. | |
4-5*1W LED Driver Adapter |
DealExtreme $14.80 |
Mains driver | 85-260 V AC | 4-5
5 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 12-18 V. Output current listed here is a guess. 5 warm white LEDs included (in an aluminium downlight). |
||
4-5x1W main driver |
DealExtreme $1.86 |
Mains bulb driver | 90-265 V AC | 4-5 | 115 V or 230 V AC mains power | 85% | 300 mA |
1 | 23 mm x 15 mm x 10 mm | Output voltage 12-19 V. |
4-7x1W main driver |
DealExtreme $3.10 |
Mains bulb driver | 90-265 V AC | 4-7 | 115 V or 230 V AC mains power | 85% | 300 mA |
1 | 35 mm x 17 mm x 15 mm | Output voltage 12-26 V. |
4-digit dual SPI-controlled RGB LED strip dimmer controller |
DealExtreme $21.10 |
User interface driver | 12-12 V | 1-3 | 12 V DC |
|
1 | 92 mm x 57 mm x 25 mm | RGB controller for two SPI LED strips, suitable for 200-400 metres of SPI RGB LED strip. This controller does not control normal RGB LED strips directly. RF remote control. | |
404 Waterproof LED Driver |
ledstok.com $22.00 + shipping |
Mains driver | 110-250 V AC | 3-10 | 115 V or 230 V AC mains power | 46-89% | 350 mA |
1 | 180 mm (?) x 27 mm x 26 mm | This product has been replaced on the retailer's web site with an LED optic. Oh boy. The driver may still be available elsewhere on the site. Update: The LED optic has vanished as well. Output voltage 10-32 V, maximum output power 11.2 W. Specs state maximum input 220 V AC but label more sensibly states 250 V AC. IP66 dust/water rating. |
40W boost driver |
DealExtreme $12.30 |
Boost driver | 12-34 V | 10-12 | 12 V or 24 V automotive | 1300 mA |
1 | 69 mm x 50 mm 19 mm | Output voltage 35-38 V. Includes driver heatsink. | |
4A linear regulator |
Intl Outdoor Store $6.21 |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion | 4000 mA |
3 | 17 mm x 15 mm high - two boards in double layer | Driver removed from site. Three modes; high, medium (30%), low (5%). Thermal protection, low voltage warning. |
|
4A, 5 mode (V10+ brand) |
FastTech $5.42 |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion | 4000 mA |
5 | 17 mm x 10 mm high - two boards in double layer | 5 modes with memory; high, medium, low, strobe, SOS. Alternate group with no flashing modes accessed by half press. | |
4A, 8 mode incl ramping (V10+ brand) |
FastTech $5.42 |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion | 4000 mA |
8 | 17 mm x 10 mm high - two boards in double layer | 8 modes in 4 groups, with memory; medium (30%), beacon strobe (10 Hz twice, 2-second pause), fast strobe (7 Hz), SOS. Alternate groups with no flashing modes accessed by half press. | |
4W mains driver with LED |
DealExtreme $3.66 |
Mains driver | 220-240 V AC | 4
1 LED included |
230Â V AC mains power | 300 mA |
1 | 100 mm x 8 mm x 3 mm | Output voltage 12-13 V. Output current is a guess. Stated dimensions appear to be the COB LED. 1 cool white COB LED included. |
|
4W mains driver with LEDs |
DealExtreme $7.00 |
Mains driver | 100-240 V AC | 4
4 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | Output current is estimate only. Includes 4 LEDs on a 28 mm diameter aluminium board. |
||
4x AMC7135 |
FastTech $1.92 |
Linear regulator | 3.0-6.3 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1400 mA |
1 | 17 mm | Linear regulator using 4x AMC7135 chips. Polarity protected (assumed to be Schottky diode). See extra AMC7135 notes below. |
4x AMC7135 |
FastTech $2.26 |
Linear regulator | N/A | 1 | 1400 mA |
5 | 17 mm | 3 + 5 modes in two groups, but no indication of currents; low, medium, high; low, medium, high, strobe, SOS. A user of the 8x AMC7135 version (8727400) says it has memory. There's no indication of what the "2800mAh" in the title refers to. |
||
4x AMC7135 V2, 7 mode |
KaiDomain $4.49 each |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion, 3x NiMH |
50-97% | 1520 mA |
7 | 17 mm | Claimed 380 mA per each of 4 AMC7135 linear regulator chips. 7 modes in 8 groups determined by binary combinations of 3 solder bridges; ultra-low (3-5 mA) [why?], medium (35%), high, strobe (10 Hz), slow strobe (2 Hz), SOS, beacon. Mode memory determined by another solder bridge. Low voltage warning at 2.8 V, claimed minimum 2.5 V; the AMC7135 datasheet says 2.7V minimum. No short circuit protection, no reverse polarity protection. Also available as a 5 pack, S020076. |
4x AMC7135, 3 mode (Nanjg 101-AK) |
Shining Beam $5.95 + shipping |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1400 mA |
3 | 17 mm | Stupidly, this driver completely vanishes from the retailer's web site when temporarily out of stock. SKU 1218. Buyer beware - the claim to be a "buck circuit board" (formerly claimed to be boost/buck driver) is clearly false, since it has four AMC4135 linear regulators plus an ATtiny13A PWM controller giving three modes - claimed low (60 mA), medium (440 mA), high (1.4 A); formerly claimed low (120 mA), medium (350 mA), high (1.4 A); tested low (60-80 mA), medium (440-450 mA), high (1420 mA). May be able to be converted to 5 modes by removing a solder bridge. See extra AMC7135 notes below. The URL of this driver used to be what was claimed to be a 5 mode buck/boost driver. This 3 mode driver is double listed on their site. |
4x AMC7135, 5 mode |
KaiDomain $13.99 for 5 |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1400 mA |
5 | 17 mm | Incomplete specifications given. The "1560mAh" in the title and "1560mAh current" under the heading "Hightlight" are meaningless, other than being typical of the site. Linear regulator using four AMC7135 chips and a ATtiny13A for PWM mode control. See extra AMC7135 notes below. Default is 5 modes - low (2%), medium (28%), high (100%), strobe, SOS. Can also be set to 3 modes (low, medium, high) using a solder bridge. Formerly product ID 11218. |
4x AMC7135, 5 mode |
Intl Outdoor Store $3.50 |
Linear regulator | 2.7-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1400 mA |
5 | 17 mm | Linear regulator using four AMC7135 chips and a ATtiny13A for PWM mode control at >4.5 kHz. Five modes with memory; low (5%), medium (30%), high, strobe, SOS. Flashing modes can be eliminated with a solder bridge. See extra AMC7135 notes below. |
4x AMC7135, 5 mode |
FastTech $2.89 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1400 mA |
5 | 17 mm | Linear regulator using 4x AMC7135 chips. 5 mode; high, medium, low, strobe, SOS. Can be converted to 3 mode with a solder bridge. Polarity protected. See extra AMC7135 notes below. |
4x AMC7135, LEDROAD LED-150603 |
FastTech $1.77 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1400 mA |
1 | 20 mm | Linear regulator using 4x AMC7135 chips. Polarity protected, low voltage protection. See extra AMC7135 notes below. |
4x AMC7135, |
FastTech $26.87 for 20 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1400 mA |
1 | 17 mm | Linear regulator using 4x AMC7135 chips. Polarity protected. See extra AMC7135 notes below. |
4x AMC7135 |
PCB Components $8.50 (approx) |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1400 mA |
1 | 17 mm | Linear regulator using four AMC7135 chips (thus the pictured driver is this one). Note that the claimed input voltage doesn't allow for the polarity protection diode; the correct figures are listed in this table. See extra AMC7135 notes below. |
4x AMC7135 |
DealExtreme $3.90 |
Linear regulator | 3.0-4.5 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH 1x Li-ion |
50-97% | 1400 mA |
5 | 17 mm | Linear regulator using four AMC7135 chips with an MCU for PWM modes and a polarity protection diode. 5 modes with mode memory; low (5%), medium (30%), high, fast strobe, SOS. Polarity protection assumed to be using a Schottky diode (providing 0.3 V drop). |
4x AMC7135 |
DealExtreme $2.87 |
Linear regulator | 3.0-6.3 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1400 mA |
1 | 17 mm | Four AMC7135 chips with a polarity protection diode. The 3.0-4.5 V range mentioned by DX is unnecessarily restrictive but fits with a single Li-ion cell plus 0.3 V for a Schottky diode providing the polarity protection. |
4x Li-ion parallel cells |
FastTech $4.35 |
Buck driver | 3.7-4.2 V | 1 | 1x Li-ion (4P) | 2300 mA |
1 | 46 mm | 3 modes; high, low, flash. Buyer beware: The details says it's intended for a particular Cree LED luminous flux bin and a non-specific Cree LED suffix - simply nonsense (or Chinese code for "we don't have a clue about LEDs"). A reviewer says he got 5.5A with fresh cells, dropping down to 3.15A at 3.7V. | |
4x1W MR16 driver |
DealExtreme $4.42 for 5 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 4 | 12 V AC or DC | 310 mA |
1 | 28 mm x 17 mm x 9 mm | Unknown operation method; presumed to be buck driver. Claimed output voltage 12-18 V, which would be impossible to do even with 12 V AC with just buck, implies buck/boost; this is almost certainly not the case. Driver comes with a bridge rectifier so it can be used with AC. Appears to be the same as DX 66271. | |
4x1W MR16 driver |
DealExtreme $4.40 for 5 |
MR16 (buck) driver | 8.0-15 V DC; also works with AC | 1-4 | 310 mA |
1 | 27 mm x 18 mm x 10 mm | Output voltage 3-15 V. | ||
4xAMC7135, 1 mode |
DealExtreme $3.27 |
Linear regulator | 3.6-4.5 V | 1 | 1x Li-ion | 50-97% | 1400 mA |
1 | 17 mm | Single mode. |
4xAMC7135, 3 mode |
DealExtreme $3.72 |
Linear regulator | 3.6-4.2 V | 1 | 1x Li-ion | 50-97% | 1400 mA |
3 | 17 mm | 3 mode; high, low, fast strobe. Polarity protection. |
4xAMC7135, RNX-R5 5 mode |
DealExtreme $4.18 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion | 50-97% | 1200 mA |
5 | 17 mm | 5 modes with memory; high, medium, low, fast strobe, SOS. Low voltage protection. Has 4xAMC7135 (1.4 A) but originally claimed the output of 6xAMC7135 (2.1 A), now claims only 1.2 A - buyer beware. Big spring (relatively speaking) on back of board. |
4x AMC7135 (Nanjg 111) |
DealExtreme $31.60 for 20 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 3x NiMH, 4x alkaline, 1x Li-ion |
50-97% | 1400 mA |
1 | 17 mm | Linear regulator using four AMC7135 chips. See extra AMC7135 notes below. Formerly also available as a 15 pack (which for some reason changed from a 10 pack). |
5 LED |
KaiDomain $19.66 |
Boost driver | 6.0-12 V | 5 | 2x Li-ion | 2500 mA |
3 | 26 mm x 30 mm high - two boards in double layer | Output voltage 17 V (range unknown). Output current variously stated to be 2.6-3.0 A and 2.5-2.8 A, and output power 50-60 W - the same as the 7 LED version; buyer beware. Input current can be up to 8 A. 3 modes; high, medium (30%), low (10%). Low voltage protection at 6 V. Thermal protection at 55-60 °C (this seems very low). | |
5 LED boost |
Intl Outdoor Store $14.47 |
Boost driver | 6.0-12 V | 5 | 2-3x Li-ion | 2800 mA |
3 | 26 mm x 30 mm high - two boards in double layer | Driver removed from site. Output voltage about 17 V. Three modes; high, medium (30%), low (5%). Thermal protection, low voltage warning. |
|
5 LED boost driver |
CN Quality Goods $6.00 + shipping |
Boost driver | 6.0-8.4 V | 5 | 2x Li-ion | 1000 mA |
5 | 20 mm x 9 mm high - two boards in double layer | 5 modes; high (800-1000 mA), medium, low, strobe, SOS. | |
5 LED boost driver |
CN Quality Goods $4.90 + shipping |
Boost driver | 7.0-14 V | 5 | 900 mA |
1 | 20 mm | Single mode, 700-900 mA. The top of the driver chip has really been attacked. | ||
5 LED boost driver |
KaiDomain $19.66 |
Boost driver | 6.0-12 V | 5 | 2x Li-ion | 2500 mA |
5 | 26 mm x 30 mm high - two boards in double layer | Output current variously stated as 2.5-2.8 A and 2.6-3.0 A. Output voltage 17 V (range unknown). 5 modes; high (100%), medium-high (75%), medium (50%), low (30%), very low (5%) (no strobe!). Thermal protection, low voltage warning at 6 V. | |
5 mode |
DealExtreme $3.39 |
User interface driver | 2.7-4.2 V | 1 | 1 x Li-ion | 1300 mA |
1 | 17 mm | Incomplete specifications - unknown regulation method, and unknown if direct drive when Vbat > Vf. Probably just offers PWM mode control; unknown maximum current handling. 5 mode with memory; high (100%), medium (25%), low (5%), strobe (11 Hz), SOS (or just SO as reported by one user). Diameter figure in title inconsistent with listed dimensions. | |
5 mode board |
Shining Beam $5.95 + shipping |
Boost driver and buck driver | 4.0-15 V | 1 | 1000 mA |
5 | 17 mm | This driver has been replaced on the retailer's web site with a 3 mode linear regulator (with the same URL). Plain weird or a typo? Â Old details: Claims to be a boost/buck driver, implying it can handle multiple LEDs, but no information is provided about that. 5 modes - high (1000 mA), medium (300 mA), low (100 mA), strobe, SOS. Mode memory. |
||
5 mode controller |
KaiDomain $6.93 for 5 |
Unspecified driver type | 3.7-4.2 V | 1 | 1x Li-ion | 2000 mA |
1 | 17 mm | Incomplete specifications given. Claimed to be for Cree XM-L but only has 2 A maximum output current. No inductor present so it's not a buck driver. Input voltage specs indicate it may be just a PWM driver. Formerly product ID 11372. |
|
5 W driver |
KaiDomain $2.65 |
Buck driver | 3.0-18 V | 1 | 1000 mA |
1 | 17 mm | Incomplete and non-sensical specifications given - output current a guess. The specs that are provided are the same as DX sku.26110. Formerly product ID 10989. |
||
5.4-24W boost driver |
DealExtreme $6.61 |
Boost driver | 12-24 V DC; also works with AC | 7-25 | 12 V, 24 V AC/DC | 300 mA |
1 | 80 mm x 25 mm x 18 mm | Output voltage 18-60 V (with 12 V input), 30-80 V (with 24 V input). Note that this voltage represents a shock hazard - use with caution. Heatsink included. | |
50W boost driver |
DealExtreme $12.40 |
Boost driver | 12-34 V | 10-12 | 12 V or 24 V automotive | 1500 mA |
1 | 69 mm x 50 mm x 20 mm | Output voltage 35-38 V. Includes driver heatsink. | |
50W mains driver |
FastTech $10.87 |
Mains driver | 85-265 V AC | 10 | 115 V or 230 V AC mains power | 1600 mA |
1 | 89 mm x 48 mm x 31 mm | Output voltage 30-36 V. | |
50W mains driver |
DealExtreme $13.11 |
Mains driver | 100-240 V AC | 10-8 | 115Â V, 230Â V AC mains power | 85% | 1500 mA |
1 | 115 mm x 36 mm x 29 mm | Output voltage 24-36 V. IP65 dust/water rating. |
576W RGB LED controller |
DealExtreme $20.00 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC |
24 A |
1 | 103 mm x 62 mm x 35 mm | 3 channel LED controller, up to 8 A per channel. Maximum power handling 288 W at 12 V, 576 W at 24 V. IR remote control. | |
5A Circuit Driver for Bike Light |
KaiDomain $13.39 |
Buck driver | 6.0-15 V | 1 | 5000 mA |
1 | 26 mm x 14mm high - two boards in double layer | Thermal protection. | ||
5A linear regulator |
Intl Outdoor Store $6.47 |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion | 5000 mA |
1 | 17 mm x 15 mm high - two boards in double layer | Driver removed from site. Three modes; high, medium (30%), low (5%). Thermal protection, low voltage warning. |
|
5A, 5 mode (V10+ brand) |
FastTech $6.40 |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion | 5000 mA |
5 | 17 mm x 10 mm high - two boards in double layer | 5 modes with memory; high, medium, low, strobe, SOS. Alternate group with no flashing modes accessed by half press. | |
5A, 8 mode incl ramping (V10+ brand) |
FastTech $6.40 |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion | 5000 mA |
8 | 17 mm x 10 mm high - two boards in double layer | 8 modes in 4 groups, with memory; medium (30%), beacon strobe (10 Hz twice, 2-second pause), fast strobe (7 Hz), SOS. Alternate groups with no flashing modes accessed by half press. Actual output current tested at 4450 mA at input voltage 4.2 V (this may have been limited by resistance of test probes - see discussion thread). |
|
5W E27/GU10 mains driver |
DealExtreme $3.30 |
Mains bulb driver | 85-265 V AC | 4-5 | 115 V or 230 V AC mains power | 90% | 315 mA |
1 | 55 mm x 26 cm x 23 mm | Output voltage 12-19 V. Stated as being suitable for E27 or GU10 bulbs but it's significantly larger than the typical size for those drivers. |
5W mains driver |
goodluckbuy.com $6.01 |
Mains driver | 85-265 V AC | 2 | 115 V or 230 V AC mains power | 680 mA |
1 | Output voltage 5-7 V. Also available with a 2s2p LED (four dice in one LED). |
||
5W mains driver |
DealExtreme $2.80 |
Mains bulb driver | 90-265 V AC | 4-6 | 115 V or 230 V AC mains power | 90% | 280 mA |
1 | 23 mm x 15 mm x 15 mm | Output voltage 12-18 V. Claimed minimum efficiency listed here. |
5W mains driver |
DealExtreme $3.00 |
Mains bulb driver | 85-265 V AC | 4-5 | 115 V or 230 V AC mains power | 280 mA |
1 | 24 mm x 17 mm x 16 mm | Output voltage 12-18 V. | |
5W mains driver |
DealExtreme $3.40 |
Mains bulb driver | 85-277 V AC | 3-5 | 115 V or 230 V AC mains power | 80% | 315 mA |
1 | 25 mm x 16 mm x 14 mm | Output voltage 6-18 V. |
5x 1W, yellow case |
DealExtreme $19.30 |
Mains driver | 85-265 V AC | 5
5 LEDs included |
115 V or 230 V AC mains power | 320 mA |
1 | Output current is assumed. 5 cool white LEDs included (in an aluminium downlight). |
||
5x AMC7135, 5 mode |
FastTech $3.18 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1750 mA |
5 | 17 mm | Linear regulator using 5x AMC7135 chips. 5 modes in 4 groups; low (5%), medium (30%), high (100%), strobe, SOS. Alternate groups switched with star contacts. Low voltage warning. Polarity protected. See extra AMC7135 notes below. |
5x AMC7135, LEDROAD LED-153603 |
FastTech $1.97 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 1750 mA |
1 | 20 mm | Linear regulator using 5x AMC7135 chips. Polarity protected, low voltage protection. See extra AMC7135 notes below. |
5x1W mains driver |
FastTech $2.20 |
Mains bulb driver | 220-240 V AC | 5 | 230 V AC mains power | 320 mA |
1 | 24 mm x 18 mm x 15 mm | Output current is assumed; the "current draw" figure is nonsense - buyer beware. | |
5x1W mains driver with GU10 base |
DealExtreme $5.56 |
Mains bulb driver | 100-240 V AC | 5 | 115 V or 230 V AC mains power | 300 mA |
1 | 40 mm x 29 mm x 29 mm | Output current is a guess. Input voltage range is a guess. Unknown output voltage range. Includes GU10 base. | |
5x1W MR16 driver |
Focalprice $3.29 |
MR16 (boost) driver | 12-12 V DC; also works with AC | 5 | 88% | 300 mA |
1 | 70 mm x 17 mm x 7 mm | Unknown driver operation. Assumed to be boost because of the claimed ability to drive 5 LEDs from 12 V DC, but claimed output voltage is 12 V. AC rectifier built in. Efficiency is claimed minimum. The stated length probably includes the LED leads. Duh. | |
6 x 2W mains driver |
DealExtreme $3.70 |
Mains bulb driver | 85-265 V AC | 6-7 | 115 V, 230 V AC mains power | 450 mA |
1 | 35 mm x 17 mm x 15 mm | Unknown output voltage. Current output is from an Error Report that has not been added to the item description. | |
6-12*1W |
DealExtreme $4.30 |
Mains driver | 85-265 V AC | 6-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 50 mm x 28 mm x 21 mm | Output voltage 20-48 V. | |
60-100W, 100W mains driver |
FastTech $31.25 |
Mains driver | 85-277 V AC | 9-11 | 115 V or 230 V AC mains power | 80% | 3000 mA |
1 | 143 mm x 70 mm x 44 mm | Output voltage 25-36 V. IP67 dust/water rating. |
608RF, RGB LED dimmer |
DealExtreme $24.00 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 24 A |
1 | 120 mm x 71 mm x 25 mm | 3 channel, maximum 8 A per channel. RF remote control. | |
60W boost driver |
Focalprice $15.16 |
Boost driver | 12-30 V | 9-11 | 12 V or 24 V automotive | 1800 mA |
1 | 70 mm x 50 mm x 20 mm | Output voltage 32-26 V. Includes driver heatsink. | |
6361, 3W mains driver |
DealExtreme $4.20 |
Mains bulb driver | 100-240 V AC | 1-4 | 115 V or 230 V AC mains power | 300 mA |
1 | 42 mm x 22 mm x 16 mm | Output voltage 3.5-12 V. | |
644IR, RGB controller |
DealExtreme $18.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 130 mm x 63 mm x 23 mm | Three channel LED controller, maximum power switching 144 W (12 V) or 288 W (24 V), 4 A per channel (12 A total). 44 key RF remote control. | |
650mA MR16 driver |
FastTech $2.65 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1 | 12 V AC or DC | 650 mA |
1 | 18 mm x 14 mm x 13 mm | Output current is assumed - buyer beware. | |
680 mA, 20 W mains driver |
DealExtreme $7.20 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 680 mA |
1 | 70 mm x 33 mm x 20 mm | Output voltage 30-36 V. | |
6W mains driver |
DealExtreme $3.00 |
Mains bulb driver | 90-265 V AC | 3 | 115Â V, 230Â V AC mains power | 90% | 435 mA |
1 | 20 mm x 15 mm x 15 mm | Output voltage 8-12V. Claimed minimum efficiency listed here. |
6x AMC7135 |
FastTech $2.26 |
Linear regulator | N/A | 1 | 2100 mA |
5 | 17 mm | 3 + 5 modes in two groups, but no indication of currents; low, medium, high; low, medium, high, strobe, SOS. A user of the 8x AMC7135 version (8727400) says it has memory. There's no indication of what the "2800mAh" in the title refers to. |
||
6x AMC7135 V2, 7 mode |
KaiDomain $4.59 each |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion, 3x NiMH |
50-97% | 2280 mA |
7 | 17 mm | Claimed 380 mA per each of 6 AMC7135 linear regulator chips. 7 modes in 8 groups determined by binary combinations of 3 solder bridges; low (3-5 mA), medium (35%), high, strobe (10 Hz), slow strobe (2 Hz), SOS, beacon. Mode memory determined by another solder bridge. Low voltage warning at 2.8 V, claimed minimum 2.5 V; the AMC7135 datasheet says 2.7V minimum. No short circuit protection, no reverse polarity protection. Also available as a 5 pack, S020065. |
6x AMC7135 V2, |
KaiDomain $18.99 for 5 |
Linear regulator | 2.5-4.5 V | 1 | 1x Li-ion | 2280 mA |
7 | 17 mm | Note that the low end of the claimed input voltage range will not produce the desired output current. Low mode 50mA (for 3-5 mA see KD S020064). Last mode memory with solder bridge. Low voltage warning at 2.8 V. | |
6x AMC7135, 5 mode |
Intl Outdoor Store $4.09 |
Linear regulator | 3.2-4.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion | 50-97% | 2100 mA |
5 | 17 mm | Linear regulator using six AMC7135 chips and a ATtiny13A providing PWM modes; PWM frequency >4500 Hz. 5 modes with memory; low (5%), medium (30%), high, strobe, SOS. Alternate mode groups can be selected by using the star-shaped contacts; low/high/strobe, low/medium/high, low (10%)/high. Low voltage warning at 2.9-3.0 V. See extra AMC7135 notes below. |
6x AMC7135, 5 mode |
FastTech $2.71 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 2100 mA |
5 | 17 mm | Linear regulator using 6x AMC7135 chips. 5 modes; low (5%), medium (50%), high (100%), strobe, SOS. Alternate group reached with half press of power button; low, medium, high. Low voltage warning. Polarity protected. See extra AMC7135 notes below. |
6x AMC7135, 5 mode |
FastTech $3.37 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 2100 mA |
5 | 17 mm | Linear regulator using 6x AMC7135 chips. 5 modes in 4 groups; low (5%), medium (30%), high (100%), strobe, SOS. Alternate groups switched with star contacts. Low voltage warning. Polarity protected. See extra AMC7135 notes below. |
6x AMC7135, 5 mode |
FastTech $3.51 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 2100 mA |
5 | 17 mm | Linear regulator using 6x AMC7135 chips. 5 modes in 4 groups; low (5%), medium (30%), high (100%), strobe, SOS. Alternate groups switched with star contacts. Low voltage warning. Polarity protected. See extra AMC7135 notes below. |
6x3W mains driver |
FastTech $9.70 |
Mains driver | 100-240 V AC | 6 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 170 mm x 33 mm x 19 mm | Output voltage 18-21 V. | |
6xAMC7135, 5 mode |
DealExtreme $4.99 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion | 50-97% | 2100 mA |
5 | 17 mm | 5 modes with memory; high, medium, low, fast strobe, SOS. Low voltage protection. Claimed output 2.2 A but it seems to simply be a normal 6xAMC7135 board. |
7 LED boost |
KaiDomain $19.66 |
Boost driver | 6.0-12 V | 7 | 2x Li-ion | 2500 mA |
3 | 26 mm x 30 mm high - two boards in double layer | Output voltage 23 V. Output current variously stated to be 2.6-3.0 A and 2.5-2.8 A, and output power 50-60 W - the same as the 5 LED version; buyer beware. Input current can be up to 8 A. 3 modes; high, medium (30%), low (10%). Low voltage protection at 6 V. Thermal protection at 55-60 °C (this seems very low). | |
7 LED boost |
Intl Outdoor Store $17.47 |
Boost driver | 6.0-12 V | 7 | 2-3x Li-ion | 2800 mA |
3 | 26 mm x 30 mm high - two boards in double layer | Driver removed from site. Output voltage about 23 V. Three modes; high, medium (30%), low (5%). Thermal protection, low voltage warning. |
|
7 LED boost driver |
KaiDomain $19.66 |
Boost driver | 6.0-12 V | 7 | 2x Li-ion | 2500 mA |
5 | 26 mm x 30 mm high - two boards in double layer | Output current variously stated as 2.5-2.8 A and 2.6-3.0 A. Output voltage 23 V (range unknown). 5 modes; high (100%), medium-high (75%), medium (50%), low (30%), very low (5%) (no strobe!). Thermal protection, low voltage warning at 6 V. | |
700 mA, 2.5 W |
DealExtreme $10.66 for 5 |
Boost driver | 3.0-3.0 V | 1 | 2x AA | 70% | 700 mA |
1 | 16 mm | Version 4: As of April 2010 buck drivers are being sent instead of boost drivers. Buyer beware. Update: Product is sold out. Version 3: As of August 2008 there seems to be a new version which may have different components and may not cope with anything over 3.0 V. Version 2: Boost driver using Zetec C300 control chip, no capacitors. 100~700 mA output, dependent on input voltage. Test data discussion (in which various people point out the test data is wrong). Version 1: 15 mm diameter. |
700mA 40V-68V Constant Current LED mains driver |
DealExtreme $17.75 |
Mains driver | 110-240 V AC | 11-20 | 115 V or 230 V AC mains voltage | 700 mA |
1 | 137 mm x 33 mm x 33 mm | Output 40-68 V. | |
70W mains driver |
DealExtreme $29.00 |
Mains driver | 85-265 V AC | 10-12 | 115 V or 230 V AC mains power | 85% | 2100 mA |
1 | 164 mm x 50 mm x 40 mm | Output voltage 30-36 V. IP67 dust/water rating. |
72W mains driver |
DealExtreme $26.30 |
Mains driver | 100-240 V AC | 7-11 | 115 V or 230 V AC mains power | 2000 mA |
1 | 158 mm x 50 mm x 26 mm | Output voltage 20-36 V. IP67 dust/water rating. | |
7W mains driver |
DealExtreme $3.20 |
Mains bulb driver | 90-265 V AC | 6-8 | 115 V or 230 V AC mains power | 95% | 325 mA |
1 | 35 mm x 15 mm x 15 mm | Output voltage 18-26 V. Claimed minimum efficiency listed here. Assumed to be a GU10/E27 driver because of the description "Suitable for common spotlight, and ball lamp cup". It's quite big, though. |
7W mains driver |
DealExtreme $7.70 |
Mains bulb driver | 90-265 V AC | 7 | 115 V or 230 V AC mains power | 90% | 315 mA |
1 | 45 mm x 15 mm x 15 mm | Output voltage 25-30 V (originally stated as 10-12 V). Claimed minimum efficiency listed here. Claimed to be a GU10/E27 driver. It's quite big, though. Claim of "Adjustable LED light chip" is not explained. |
7W mains driver |
DealExtreme $4.00 |
Mains driver | 85-265 V AC | 6-8 | 115 V or 230 V AC mains power | 95% | 300 mA |
1 | 70 mm x 33 mm x 21 mm | Output voltage 17-26 V. |
7W mains driver with LEDs |
DealExtreme $8.20 |
Mains driver | 100-240 V AC | 7
7 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | Output current is estimate only. Includes 7 LEDs on a 50 mm diameter aluminium board. |
||
7x AMC7135, 5 mode |
FastTech $3.56 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 2450 mA |
5 | 17 mm | Linear regulator using 7x AMC7135 chips. 5 modes in 4 groups; low (5%), medium (30%), high (100%), strobe, SOS. Alternate groups switched with star contacts. Low voltage warning. Polarity protected. See extra AMC7135 notes below. |
7x3W mains driver |
FastTech $11.89 |
Mains driver | 100-240 V AC | 7 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 106 mm x 42 mm x 32 mm | Output voltage 21-25 V. | |
800 mA buck driver |
KaiDomain $10.20 for 4 |
Buck driver | 3.6-9.0 V | 1 | 3-6x NiMH, 1-2x |
800 mA |
1 | 17 mm | Incomplete specs provided. From the pictures it looks like it's based on the Zetex C310 chip. Size stated in this table is an educated guess. In the 3rd photo, focusing the camera on the wires sticking out the back might be arty but isn't very useful. Formerly product ID 7330. |
|
800mA buck driver |
FastTech $1.58 |
Buck driver | 3.2-4.2 V | 1 | 1x Li-ion | 800 mA |
1 | 17 mm | Not a linear regulator as claimed - it has an inductor. The claimed test figures are extremely dodgy; input @ 4.2 V is 1.09 W, output is at least 2.27 W for a white LED - buyer beware. They are also the same figures used for 1114502. | |
800mA linear regulator |
FastTech $1.65 |
Linear regulator | 3.2-4.2 V | 1 | 1x Li-ion | 800 mA |
5 | 17 mm | 5 modes; high, medium, low, rapid (strobe?), SOS. The claimed test figures are extremely dodgy; input @ 4.2 V is 1.09 W, output is at least 2.27 W for a white LED - buyer beware. They are also the same figures used for 1114501. | |
825mA lighting driver |
FastTech $2.13 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1-3 | 12 V AC or DC | 825 mA |
1 | 21 mm x 17 mm x 13 mm | Output current is from the discussion post. If true there is an inconsistency between the input and output current figures - buyer beware. | |
8W |
DealExtreme $7.80 |
Mains bulb driver | 180-265 V AC | 20-24 | 230 V AC mains power | 108 mA |
1 | 250 mm x 16 mm x 10 mm | Designed as a driver for fluorescent tube replacements, with 20-24 LEDs in series and 6 low power LEDs in parallel. Actual output voltage unknown. | |
8W mains driver |
DealExtreme $3.50 |
Mains bulb driver | 90-265 V AC | 6-8 | 115 V or 230 V AC mains power | 95% | 315 mA |
1 | 35 mm x 15 mm x 15 mm | Output voltage 18-26 V. Claimed minimum efficiency listed here. Possibly usable as a GU10/E27 driver, as similar but larger drivers are claimed to be. |
CPF member $7.99 + shipping |
Linear regulator | 3.5-4.2 V | 1 | 1x Li-ion | 3000 mA |
12 | 17 mm with components on both sides | Available from CPF member vestureofblood. 12 modes in 4 groups, with and without memory (varies by group); various combinations of ramping, low (2%), medium (25%), high, strobe, SOS, beacon, medium (15%). Low voltage warning. Voltage indication when entering beacon mode. | ||
8x AMC7135 |
FastTech $2.26 |
Linear regulator | N/A | 1 | 2800 mA |
1 | 17 mm | 3 + 5 modes in two groups, but no indication of currents; low, medium, high; low, medium, high, strobe, SOS. A user of the 8x AMC7135 version (8727400) says it has memory. There's no indication of what the "2800mAh" in the title refers to. |
||
CPF member $9.36 + shipping |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 4x NiMH | 50-97% | 2800 mA |
5 | 17 mm with components on both sides | Limited availability from CPF member download. Multimode board with four AMC7135 linear regulators on each side (8 total) and an ATtiny13A for PWM mode control. Mode group selectable by connecting star pads on the board, like an AK-47. 5 modes in default group; low (0.13 A), medium (0.93 A), high (2.8 A), strobe, SOS. See extra AMC7135 notes below. May have sold a previous 3 mode version like this; high (2.8 A), medium (1 A), low (0.3 A). |
|
8x AMC7135 (homemade) |
$6.88 (varies) |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 4x NiMH | 50-97% | 2800 mA |
1 | 17 mm | Instructions for making your own version. Actual price will vary depending on what boards you use to make it - modes can be included if desired. See extra AMC7135 notes below. |
8x AMC7135 high output, Qlite Rev. A (Nanjg 105C) |
Intl Outdoor Store $4.19 |
Linear regulator | 2.8-4.5 V | 1 | 3-4x NiMH 1x Li-ion |
50-97% | 3040 mA |
9 | 17 mm | Linear regulator using eight high output AMC7135 chips at 380 mA each. 9 distinct modes in 4 groups, with memory. Claims no high pitch noises and no visible flicker. Polarity protection, low voltage warning and protection. See extra AMC7135 notes below. |
8x AMC7135 high output, |
Intl Outdoor Store $4.19 |
Linear regulator | 2.9-4.5 V | 1 | 3-4x NiMH 1x Li-ion |
50-97% | 3040 mA |
6 | 17 mm | Linear regulator using eight AMC7135 chips and a ATtiny13A for PWM mode control; PWM frequency >4500 Hz. 5 modes with memory; low (5%), medium (30%), high, strobe, SOS. Alternate mode groups can be selected by using the star-shaped contacts; low/high/strobe, low/medium/high, low (10%)/high. Low voltage warning at 2.9-3.0 V. See extra AMC7135 notes below. |
8x AMC7135 high output, |
Intl Outdoor Store $4.19 |
Linear regulator | 2.8-4.5 V | 1 | 3-4x NiMH 1x Li-ion |
50-97% | 3040 mA |
9 | 17 mm | Driver removed from site. Linear regulator using eight high output AMC7135 chips at 380 mA each. 9 distinct modes in 4 groups, with memory. Claims no high pitch noises and no visible flicker. Polarity protection, low voltage protection. See extra AMC7135 notes below. See p-710 for updated version. |
8x AMC7135 V2, |
KaiDomain $4.79 each |
Linear regulator | 2.7-4.5 V | 1 | 1x Li-ion, 3x NiMH |
50-97% | 3040 mA |
7 | 17 mm | Claimed 380 mA per each of 8 AMC7135 linear regulator chips. Up to 7 modes in each of 8 groups determined by binary combinations of 3 solder bridges; low (aka "firefly", 3-5 mA), medium (35%), high, strobe (10 Hz), slow strobe (2 Hz), SOS, beacon. Mode memory determined by another solder bridge. Low voltage warning at 2.8 V, claimed minimum 2.5 V; the AMC7135 datasheet says 2.7V minimum. No short circuit protection, no reverse polarity protection. Also available as a 5 pack, S020074. |
8x AMC7135 V2, |
KaiDomain $21.49 for 5 |
Linear regulator | 2.5-4.5 V | 1 | 1x Li-ion | 3040 mA |
1 | 17 mm | Note that the low end of the claimed input voltage range will not produce the desired output current. Low mode 50mA (for 3-5 mA see KD S020073). Last mode memory with solder bridge. Low voltage warning at 2.8 V. | |
8x AMC7135, 5 mode |
CN Quality Goods $5.00 + shipping |
Linear regulator | 3.0-5.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion, 4x NiMH |
50-97% | 2800 mA |
5 | 17 mm | Linear regulator using eight AMC7135 chips. 5 modes in two groups; low (5%), medium (15%), high, strobe, SOS. Polarity protected. The stated input voltage range is a little high at the top end; 5.5 V for the ATtiny13 and about 0.3V for the polarity protection Schottky diode. See extra AMC7135 notes below. |
8x AMC7135, 5 mode |
FastTech $2.92 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 2800 mA |
5 | 17 mm | Linear regulator using 8x AMC7135 chips. 5 modes in 4 groups; high, medium, low, strobe, SOS. Alternate groups switched with star contacts. Low voltage warning. Polarity protected. See extra AMC7135 notes below. |
8x AMC7135, 5 mode (Nanjg 105C) |
DealExtreme $4.31 |
Linear regulator | 3.0-4.5 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3-4x NiMH 1x Li-ion |
50-97% | 2800 mA |
5 | 17 mm | Linear regulator using eight AMC7135 chips and an ATtiny13A to control PWM modes. 5 modes with memory; low (5%), medium (30%), high, fast strobe, SOS. Selectable mode groups set by solder bridge on the stars. Polarity protection assumed to be using a Schottky diode (providing 0.3 V drop). Low voltage warning. |
8x AMC7135, 5 mode |
FastTech $3.76 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 2800 mA |
5 | 17 mm | Linear regulator using 8x AMC7135 chips. 5 modes in 4 groups; low (5%), medium (30%), high (100%), strobe, SOS. Alternate groups switched with star contacts. Low voltage warning. Polarity protected. See extra AMC7135 notes below. |
8x AMC7135, 5 mode |
FastTech $3.05 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion 3x NiMH 4x alkaline |
50-97% | 2800 mA |
5 | 17 mm | 5 modes in 2 groups with memory; low (5%), medium (50%), high, strobe, SOS. Alternate group with no flashing modes accessed by half press. Low voltage warning. |
8x AMC7135, |
KaiDomain $4.83 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion, 4x NiMH |
50-97% | 2800 mA |
1 | 17 mm | Updated version: This is a Nanjg 105C without the PWM controller board to give modes. Polarity protection. Why the previous price was so much more expensive than the 5 mode version is beyond my guessing ability. Previous version: This is just two 4x AMC7135 boards connected back to back. See extra AMC7135 notes below. Warning: Even with the product update the page still contains a full size 6 megapixel image - pretty typical for KD's stupid site. Formerly product ID 1770. |
8x AMC7135, |
ledsupermall.com $4.30 |
Linear regulator | 3.3-6.6 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion, 4x NiMH |
50-97% | 2800 mA |
1 | 17 mm | Linear regulator using eight AMC7135 chips. Single mode. Apparently a Nanjg 105C board with no mode controller. |
8x AMC7135, |
Shining Beam $6.75 (formerly $6.95) + shipping |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 4x NiMH | 50-97% | 2800 mA |
3 | 17 mm with components on both sides | Stupidly, this driver completely vanishes from the retailer's web site when temporarily out of stock. SKU 1217. Multimode board with a PWM mode controller and eight AMC7135 linear regulators (four on each side of the board). 3 modes with memory; low 140 mA, medium 1 A, high 2.8 A (formerly listed as 2.5 A). Claimed input voltage of 2.8-6.0 V doesn't allow for the polarity protection diode; the more likely correct figures are listed in this Driver List table. The output of AMC7135 chips varies a little, so high might be as much as 2.8 A (as mentioned here and here). Also pictured in this post and this post. |
8x AMC7135, |
ledsupermall.com $4.80 |
Linear regulator | 3.0-5.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion, 4x NiMH |
50-97% | 2800 mA |
5 | 17 mm | Linear regulator using eight AMC7135 chips. 5 modes; unstated what they are. Apparently a Nanjg 105C board; if so it has selectable mode groups (by solder bridge on the stars). Low voltage warning - when battery voltage is less than 2.9-3.0 V it changes to low mode and flashes once each second. Polarity protection assumed to be using a Schottky diode (providing 0.3 V drop). |
8x AMC7135, |
KaiDomain $4.79 each |
Linear regulator | 3.3-6.1 V (for 0.6 V lower Vin see Tip 1 in the notes below) |
1 | 1x Li-ion, 4x NiMH |
50-97% | 2800 mA |
5 | 17 mm (measured, not stated) | March 2012: Driver has been removed from site (as has the 5 pack). See KD sku S020073 for a replacement. Incomplete specifications given. Uses 8 AMC7135 linear regulator chips with either a PIC12F629 microcontroller for modes, or an ATtiny13A for the 105C model (which is apparently the latest version). Modes are determined by the stars on the board - they provide AK-47 functionality (where a group of modes is hardwired using a solder link). Has the same basic mode groups as CPF user download's very similar driver (diagram here) except their order for the 105A is high (100%), medium (35%), low (4%). When low mode is started there is a momentary bright flash, and after about 2.5 seconds there's a very brief dropout (or "blink") that indicates the mode has been fixed - after that, switching off momentarily will not change the mode. Reviews written for 105 and 105A. As of Jan 2011 the 105C is being shipped. The maximum voltage in this table is based on the microcontroller's maximum of 5.5 V plus 0.6 V for the polarity protection diode. If it's a Schottky diode the maximum voltage is actually 5.8 V. Tip: The circuit track for the first star does not need to be broken for the other stars to work. Formerly product ID 10995. Also available as a 5 pack, S009835 (formerly product ID 11088). |
8x AMC7135, |
Intl Outdoor Store $4.19 |
Linear regulator | 3.0-4.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3-4x NiMH 1x Li-ion |
50-97% | 2800 mA |
5 | 17 mm | Driver removed from site. Linear regulator using eight AMC7135 chips and a ATtiny13A for PWM mode control; PWM frequency >4500 Hz. 5 modes with memory; low (5%), medium (30%), high, strobe, SOS. Alternate mode groups can be selected by using the star-shaped contacts; low/high/strobe, low/medium/high, low (10%)/high. Low voltage warning at 2.9-3.0 V. See extra AMC7135 notes below. |
8x AMC7135 |
Intl Outdoor Store $4.15 |
Linear regulator | 3.0-4.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1 | 3-4x NiMH 1x Li-ion |
50-97% | 2800 mA |
1 | 17 mm | Linear regulator using eight AMC7135 chips. Polarity protection. See extra AMC7135 notes below. |
8xAMC7135, 5 mode |
DealExtreme $4.71 |
Linear regulator | 3.0-4.5 V | 1 | 1x Li-ion | 50-97% | 2800 mA |
5 | 17 mm | 5 mode; high, medium, low, strobe, SOS. Can change to 2-3 modes using stars on back. The star on the right gives high, medium, and low with no blinking modes. |
9 channel LED strip controller |
DealExtreme $12.60 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
5 | 70 mm x 45 mm x 29 mm | 9 channel, maximum 0.67 A per channel (the "3A*9" on the unit is said to be incorrect). IR remote control. | |
9 channel RGB LED controller with RGB LED strip |
DealExtreme $54.10 |
User interface driver | 12-24 V | 1-6
255 LEDs included |
12 V DC | 18 A |
1 | 9 channel, maximum 2 A per channel. For a 9 channel controller without a LED strip included see DX sku.160152. 12 V RGB LED strip included. |
||
9 channel RGB LED controller with RGB LED strip |
DealExtreme $57.60 |
User interface driver | 12-24 V | 1-3
255 LEDs included |
12 V or 24 V DC | 18 A |
20 | Nine channel, maximum 2 A per channel. IR remote control. | ||
9 LED boost |
KaiDomain $19.98 |
Boost driver | 9-12 V | 9 | 3x Li-ion | 2600 mA |
3 | 26 mm x 30 mm high - two boards in double layer | Output voltage 30 V. Output current variously stated to be 2.6-3.0 A and 2.8-3.0 A, and output power 70-100 W when running on 3-4x Li-ion cells (which contradicts the claimed input voltage range); buyer beware. Input current can be up to 8 A. 3 modes; high, medium (30%), low (10%). Low voltage warning at 9 V (although a working minimum of 6 V is also stated). Thermal protection at 55-60 °C (this seems very low). | |
9 LED boost driver |
KaiDomain $20.38 |
Boost driver | 6.0-12 V | 9 | 3-4x Li-ion | 2600 mA |
5 | 26 mm x 30 mm high - two boards in double layer | Output current variously stated as 2.6-3.0 A and 2.8-3.0 A. Output voltage 30 V (range unknown). 5 modes; high (100%), medium-high (75%), medium (50%), low (30%), very low (5%) (no strobe!). Thermal protection, low voltage warning at 9 V. | |
9*1W mains driver |
DealExtreme $4.00 |
Mains bulb driver | 85-265 V AC | 9 | 115 V, 230 V AC mains power | 300 mA |
1 | 36 mm x 16 mm x 15 mm | Output voltage 27-33 V. Not specifically stated as being suitable for GU10 or E27 bulbs but it's a similar size to those that are. | |
9-18W fluoro bulb replacement mains driver |
DealExtreme $5.70 |
Mains driver | 85-277 V AC | 12-24 | 115 V or 230 V AC mains power | 95% | 230 mA |
1 | 120 mm x 17 mm x 10 mm | Output voltage 30-80 V. Note that this voltage represents a shock hazard - use with caution. Apparently intended for an array of low power LEDs. A 24 W version is sku.144863. |
900mA buck driver |
FastTech $4.82 |
Buck driver | 12-14 V | 3 | 12 V automotive | 900 mA |
1 | 43 mm x 24 mm x 8 mm | Apparently intended for a 10W (3s3p) LED array. | |
900mA MR16 driver |
FastTech $3.62 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1 | 12 V AC or DC | 900 mA |
1 | 16 mm x 15 mm x 13 mm | ||
9A 3 mode driver |
Intl Outdoor Store $12.53 |
Buck driver | 5.5-15 V | 1 | 9 A |
1 | 26 mm x 16 mm high - two boards in double layer | Driver removed from site. 3 modes; low (10%), medium (30%), high. (The right order and no flashing modes - yay!) 12 V recommended maximum input voltage. Thermal protection and low voltage protection for 2 Li-ion cells. |
||
9A Circuit Driver for Bike Light |
KaiDomain $13.99 |
Buck driver | 6.0-15 V | 1 | 9 A |
1 | 26 mm x 14mm high - two boards in double layer | Thermal protection. | ||
9W |
DealExtreme $3.78 |
MR16 (buck) driver | 12-24 V DC; also works with AC | 3 | 12 V DC; 12 V AC | 833 mA Can be modified to 1000 mA |
1 | 26 mm x 17 mm x 10 mm | Buck regulator based on PT4115 chip. Unclear what current rating the diodes have; assumed to be 1 A. Sense resistors 0.2 Ω and 0.3 Ω in parallel. Output voltage 9-11 V. Includes AC rectifier. MR16 prongs not included. | |
9W mains driver |
DealExtreme $3.50 |
Mains bulb driver | 90-265 V AC | 3 | 115 V or 230 V AC mains power | 90% | 625 mA |
1 | 40 mm x 15 mm x 15 mm | Output voltage 9-12 V. Claimed minimum efficiency listed here. Assumed to be a GU10/E27 driver because of the description "Suitable for common spotlight, and ball lamp cup". It's quite big, though. Possibly has poor regulation, as discussed in this thread. |
9~25 SMD LED mains driver |
DealExtreme $5.90 |
Mains driver | 85-277 V AC | 9-25 | 115Â V, 230Â V AC mains power | 95% | 230 mA |
1 | 146 mm x 18 mm x 11 mm | Output voltage 30-80 V. Note that this voltage represents a shock hazard - use with caution. Designed for 9-25S/12P SMD 3528 LED, 9-25S/8P SMD 3014 LEDs. |
A6033RF, 12A 144W RGB controller |
DealExtreme $20.20 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
19 | 95 mm x 65 mm x 25 mm | Three channel, 4 A per channel. Maximum power handling 144 W at 12 V. RF remote control. | |
A620RF, 12A 288W RGB controller |
DealExtreme $21.50 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
21 | 130 mm x 62 mm x 23 mm | Three channel, each channel 4 A, maximum 5 A, total 12 A. Maximum power handling 144 W at 12 V, 288 W at 24 V. RF remote control. | |
A644IR, RGB LED strip controller |
DealExtreme $12.20 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 6000 mA |
1 | 60 mm x 35 mm x 22 mm | 3 channels, maximum 2 A per channel. IR remote control. | |
A729RF, 216W/24V RGB controller |
DealExtreme $26.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC |
9 A |
11 | 100 mm x 60 mm x 43 mm | 3 channel LED controller, each channel up to 3 A. Maximum power handling 108 W at 12 V, 216 W at 24 V. RF remote control. | |
A9 Buck Current Regulated 3.0V~8.4V 1.3A Flashlight PCB |
KaiDomain $3.55 |
Buck driver | 3.0-8.4 V | 1 | 1300 mA |
1 | 17 mm | Components on both sides of board, no centre battery terminal. There are an awful lot of components on that board for a single mode buck driver. Incomplete/inadequate specifications listed - unknown current regulation, unknown if the driver will step up the voltage if it's too low. The 1.3 A "maximum" implies it's not a constant current driver. Buyer beware. Formerly product ID 9908. |
||
AAA boost driver |
DealExtreme $2.70 for 2 |
Boost driver | 0.9-1.5 V | 1 | 1x AAA | 46% | 360 mA |
1 | 12 mm | Unknown input voltage range. Unknown regulation quality; output current claimed to be 350-400 mA. Probably a smaller version of DX sku.128096. |
ABL0709A mains driver |
DealExtreme $10.40 |
Mains driver | 85-265 V AC | 7-9 | 115 V or 230 V AC mains power | 600 mA |
1 | 100 mm x 30 mm x 20 mm | Output voltage 20-32 V. IP68 dust/water resistance. Short circuit, over current and overload protection. | |
ACG D series LED drivers |
acgelectronics.com $9.95 + shipping |
Buck driver | 9-40 V DC; also works with AC (8-30 V AC, except 1.4 A version) |
1-4 | 91% | 1400 mA |
1 | 42 mm x 32 mm x 12 mm | The URLs linked below have all been reused for various LED products, but the drivers may still be listed on their site elsewhere. Good luck finding them. Incomplete specifications on manufacturer's and retailer's web sites (incompetent manufacturer?); output voltage/LED quantities unknown. However, by using the wizard on the manufacturer's site it appears they'll do 1-4 LEDs. The claimed maximum 91% efficiency is very good, if true, especially since the drivers (except the 1,400 mA) have a rectifier built in. Even if maximum efficiency is up there however, it's probably not representative of typical efficiency, especially since they all claim the same (except for the 500 mA version which claims 92%) - unlikely across the whole current output range. Soft start. PWM dimming with 0-10 V input or potentiometer. Available in versions with outputs of 350, 500, 700, 1,000 and 1,400 mA. |
|
AK-007 |
DealExtreme $3.10 |
Boost driver | 0.8-1.5 V | 1 | 1x AA 1x AAA |
300 mA |
1 | 12 mm - two boards in double layer | 3 mode; high (100%), low (15%), strobe (9 Hz). Incomplete specs - output current is just a guess and probably varies significantly depending on input voltage. | |
AMC7135 chip |
Intl Outdoor Store $0.39 |
Linear regulator | 2.7-6.0 V | 1 | 3x NiMH 4x alkaline 1x Li-ion |
50-97% | 350 mA |
1 | 5 mm x 5 mm x 2 mm | Driver removed from site. Single AMC7135 linear regulator chip; no board. Actual output of any particular chip is in the range 340-380 mA; this one should be close to 350 mA. See extra AMC7135 notes below. |
AMC7135 chip x5 |
CN Quality Goods $2.50 for 5 + shipping |
Linear regulator | 2.7-6.0 V | 1 | 3x NiMH 4x alkaline 1x Li-ion |
50-97% | 350 mA |
1 | 5 mm x 5 mm x 2 mm | Five single AMC7135 linear regulator chips; no board. Actual output of any particular chip is in the range 340-380 mA. See extra AMC7135 notes below. |
AMC7135 chip |
Intl Outdoor Store $2.45 for 5 |
Linear regulator | 2.7-6.0 V | 1 | 3x NiMH 4x alkaline 1x Li-ion |
50-97% | 380 mA |
1 | 5 mm x 5 mm x 2 mm | Five AMC7135 linear regulator chips; no board. Actual output of any particular chip is in the range 340-380 mA; these should be close to 380 mA. See extra AMC7135 notes below. |
AMP640A, 4 channel LED strip amplifier |
DealExtreme $18.82 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC mains power | 20 A |
1 | 126 mm x 45 mm x 29 mm | 4 channel, maximum 5 A per channel. | |
Ampere! 5000 mA |
PCB Components $42.00 (approx) |
Buck driver | 7.0-25 V | 1-3 | 97% | 5000 mA Can be modified to 11 A |
1 | 25 mm x 14 mm high | Output voltage up to ~14 V, output power up to ~70 W. Overhead ~1 V. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. Thermal protection. External PWM input. | |
Ampere! 9000 mA |
PCB Components $42.00 (approx) |
Buck driver | 7.0-25 V | 1-3 | 97% | 9 A Can be modified to 11 A |
1 | 25 mm x 14 mm high | Output voltage up to ~14 V, output power up to ~120 W. Overhead ~1 V. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. Thermal protection. External PWM input. | |
AMS1117-3.3 linear regulator chip |
DealExtreme $3.99 for 50 |
Linear regulator | 3.0-5.5 V | 1 | 1x Li-ion | 200 mA |
1 | Output voltage 0.7-3.3 V. SOT-223 surface mount package. From the claimed specs it is apparently not an AMS1117-3.3 (datasheet) which has an output current of 1 A, not the 200 mA claimed. | ||
AS-RGB-C118, RGB LED strip controller |
DealExtreme $7.60 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
19 | 178 mm x 17 mm x 8 mm | 3 channel, assumed maximum 4 A per channel (total 144 W). IR remote control. For a black version see sku.202090. | |
AS-RGB-C118, RGB LED strip controller |
DealExtreme $7.20 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
19 | 180 mm x 17 mm x 8 mm | 3 channel, assumed maximum 4 A per channel (total 144 W). IR remote control. For a white version see sku.200926. | |
Assembled Blue Shark with Remora UI |
Sandwich Shoppe $55.00 + shipping |
Boost driver | 2.7-25 V | 1-5 | 980 mA |
4 | 19 mm - two boards in double layer | This product has vanished from the retailer's web site. Â Multimode boost regulator. Maximum input current 4 A. Available in two flavours - three mode Plain (low, medium, high) and four mode Special (with SOS). |
||
Assembled Shark Buck with Remora UI |
Sandwich Shoppe $59.00 + shipping |
Buck driver | 5.0-15 V | 1-3 | 75-77% | 3000 mA |
4 | 19 mm | Multimode high current buck driver. Available in two flavours - three mode Plain (low, medium, high) and four mode Special (with SOS). For some strange reason complete specifications are not readily available but some more information is available in this thread, where Wayne says you can drive "maybe 4" LEDs. (I can't see any explanation why the efficiency graph shows values 2% higher than the table.) | |
Assembled Shark with Remora UI |
Sandwich Shoppe $50.00 + shipping |
Boost driver | 2.7-20 V | 1-5 | 980 mA |
4 | 19 mm - two boards in double layer | This product has vanished from the retailer's web site. Multimode boost regulator. Maximum input current 4 A. Available in two flavours - three mode Plain (low, medium, high) and four mode Special (with SOS). |
||
AT1000, 1x10W driver |
FastTech $5.38 |
Buck driver | 12-12 V | 3 | 12 V DC | 1000 mA |
1 | 65 mm x 26 mm x 24 mm | Output voltage 9.0-10.5 V. Intended for 3s3p LED arrays. | |
Aurora 1-16x 3W, 700mA dimmable |
Aurora $0.00 (approx) |
Mains driver | 100-264 V AC | 1-16 | 115Â V, 230Â V AC mains power | 700 mA |
1 | 164 mm x 46 mm x 32 mm | Driver removed from site. Dimmable with 1-10 V input (controller available separately). Output in two series of up to 8 LEDs each. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 1-18W, 350mA dimmable |
Aurora $116.00 (approx) |
Mains driver | 100-264 V AC | 1-18 | 115Â V, 230Â V AC mains power | 350 mA |
1 | 155 mm x 38 mm x 24 mm | Driver removed from site. Dimmable with 1-10 V input (controller available separately). Output in two series of up to 9 LEDs each. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 1-2x 3W, 700mA |
Aurora $35.00 (approx) |
Mains driver | 100-264 V AC | 1-2 | 115Â V, 230Â V AC mains power | 700 mA |
1 | 50 mm x 50 mm x 20 mm | Driver removed from site. Overload protection, short-circuit protection, thermal protection. Output voltage 3-8.2 V. |
|
Aurora 1-6W 350mA |
Aurora $42.00 (approx) |
Mains driver | 100-264 V AC | 1-6 | 115Â V, 230Â V AC mains power | 350 mA |
1 | 95 mm x 38 mm x 24 mm | Driver removed from site. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 1-9 W, 350 mA |
Aurora $42.00 (approx) |
Mains driver | 100-264 V AC | 1-9 | 115Â V, 230Â V AC mains power | 350 mA |
1 | 144 mm x 38 mm x 24 mm | Driver removed from site. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 1-9W 350mA, waterproof |
Aurora $56.00 (approx) |
Mains driver | 100-264 V AC | 1-9 | 115Â V, 230Â V AC mains power | 350 mA |
1 | 144 mm x 38 mm x 24 mm | Driver removed from site. IP68 dust/water rating; up to 2 m underwater. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 18W 700mA |
Aurora $91.00 (approx) |
Mains driver | 220-240 V AC | 4-6 | 220-240 V AC mains power | 700 mA |
1 | 140 mm x 43 mm x 24 mm | Driver removed from site. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 1x 1W, 350mA |
Aurora $23.00 (approx) |
Mains driver | 100-264 V AC | 1 | 115Â V, 230Â V AC mains power | 350 mA |
1 | 38 mm x 27 mm x 21 mm | Driver removed from site. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 24W, 700mA |
Aurora $105.00 (approx) |
Mains driver | 220-240 V AC | 5-8 | 220-240 V AC mains power | 700 mA |
1 | 140 mm x 43 mm x 27 mm | Driver removed from site. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 6W, 700mA |
Aurora $42.00 (approx) |
Mains driver | 100-264 V AC | 1-2 | 115Â V, 230Â V AC mains power | 700 mA |
1 | 94 mm x 38 mm x 25 mm | Driver removed from site. Overload protection, short-circuit protection, thermal protection. |
|
Aurora 9W 700mA, waterproof |
Aurora $70.00 (approx) |
Mains driver | 100-264 V AC | 1-3 | 115Â V, 230Â V AC mains power | 700 mA |
1 | 120 mm x 35 mm x 25 mm | Driver removed from site. IP68 dust/water rating; up to 2 m underwater (note that the primary lead is only 1 m long). Overload protection, short-circuit protection, thermal protection. |
|
Aurora 9W, 700mA |
Aurora $56.00 (approx) |
Mains driver | 100-264 V AC | 1-3 | 115Â V, 230Â V AC mains power | 700 mA |
1 | 145 mm x 38 mm x 25 mm | Driver removed from site. Overload protection, short-circuit protection, thermal protection. |
|
CPF member $12.00 (up from $10.40) + shipping |
Buck driver | 3.6-15 V | 1-4 | 80-90% | 1040 mA Can be modified to 2000 mA |
3 | 23 mm | Limited availability from CPF member download. Uses the popular AX2002 chip; this seems to be the only AX2002 driver available with modes. Present, designation J: 3 modes; low (50 mA), medium (200 mA), high (1 A). No memory. A few of these have been sold pre-configured to 1.4 A. Previously, designation H: 3 modes; high (1 A), medium (200 mA), low (30 mA). Has memory. 17 mm diameter. Input voltage 3.6-23 V, 1-6 LEDs. Claimed 0.25 V headroom (the amount input voltage must be above output voltage); this is probably actually the feedback voltage (the voltage dropped across the current set resistor) - other AX2002 drivers have ~0.5 V headroom. It may be able to be set the output current up to 2 A, the rating for the AX2002. |
||
µ-Dim - Super miniature PWM dimming |
PCB Components $20.50 (approx) |
User interface driver | 3.0-26 V | 0 |
|
1 | 20 mm half disc | Two versions: Buttons, with operation using one button (25%, 50%, 100%, long press turns off) or two buttons (0-100% stepless); or Potentiometers (0-100% stepless). | ||
µBuck |
PCB Components $19.00 (approx) |
Buck driver | 6.0-30 V | 1-4 | 95% | 1000 mA |
1 | 14 mm x 11 mm x 6 mm | Maximum output power ~15 W. Polarity protection. Dimming by PWM signal or DC. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. | |
µBuck |
PCB Components $19.00 (approx) |
Buck driver | 6.0-30 V | 1-6 | 95% | 700 mA Can be modified to 1000 mA |
1 | 14 mm x 11 mm x 6 mm | Maximum output power ~15 W. Polarity protection. Dimming by PWM signal or DC. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. | |
µBuck |
PCB Components $19.00 (approx) |
Buck driver | 6.0-30 V | 1-9 | 95% | 350 mA Can be modified to 1000 mA |
1 | 14 mm x 11 mm x 6 mm | Maximum output power ~15 W. Polarity protection. Dimming by PWM or DC inputs. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. | |
b2Flex v1.0 |
TaskLED $30.00 + shipping |
Unspecified driver type | N/A | 0 | 1500 mA |
1 | Coming soon. | |||
B4X36V060-1, 20W mains driver |
DealExtreme $10.90 |
Mains driver | 180-265 V AC | 6-12 | 230 V AC mains power | 600 mA |
1 | 77 mm x 38 mm x 25 mm | Output voltage 22-36 V. IP66 dust/water rating. | |
Badboy |
Sandwich Shoppe $13.00 for all except $16.50 for 750 mA and 1 A versions + shipping |
Boost driver | 1.6-6.0 V | 1-2 | 85-89% | 1000 mA |
1 | 14 mm | Boost regulator. Vin must be less than Vout. Maximum Iin 1.5 A. Constant current output, board available as a "blank" (add set resistor), or preset to 300 mA, 400 mA, 500 mA, 750 mA, or 1000 mA. Must always have a load connected. | |
Badly regulated buck driver |
KaiDomain $9.13 for 5 |
Buck driver | 3.0-10.0 V | 1 | 700 mA |
1 | 16 mm | Output current stated to be 700-1000 mA; horrendous regulation! Formerly product ID 11417. |
||
BB Nexgen |
Sandwich Shoppe $15.00 - $16 + shipping |
Boost driver | 2.0-6.0 V | 1 | 80-91% | 1000 mA |
1 | 14 mm | Boost regulator, but apparently needs to be started with Vin between 3.4 V and Vf to start the full current regulation mode, otherwise it starts in safe mode, which is 1.5 A maximum input current. Constant current output, maximum 1 A. Board available as a "blank" (add set resistor), or preset to 400 mA, 500 mA, 750 mA and 1000 mA. Must always have a load connected. | |
bFlex v3 |
TaskLED $30.00 + shipping |
Buck driver | 4.0-25 V | 1-7 | 1000 mA |
8 | 25 mm | Buck regulator. Constant current out 350-1000 mA (user reconfigurable) at up to 24 V, uController UI. Thermal and polarity protection included. | ||
BL-3F(8-25W), low voltage AC boost driver |
DealExtreme $10.50 |
Boost driver | 12-24 V DC; also works with AC | 8-25 | 12 V or 24 V AC or DC | 300 mA |
1 | 109 mm x 29 mm x 20 mm | Output voltage 24-80 V. Note that this voltage represents a shock hazard - use with caution. | |
BL-DCS2(20W) |
DealExtreme $10.00 |
Boost driver | 12-24 V | 8-12 | 12 V or 24 V DC | 600 mA |
1 | 84 mm x 29 mm x 20 mm | Output voltage 24-38 V. | |
Black Power v2 |
PCB Components $34.00 (approx) |
Buck driver | 7.5-33 V | 1-6 | 92% | 2800 mA |
1 | 28 mm | 1.5 V overhead. External on/off input. Soft start. Efficiency claimed is maximum; typical efficiency unknown. Thermal protection. | |
Blank 3 W mains driver |
DealExtreme $13.80 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 680 mA |
1 | No specifications printed on driver. 1 white LED included (in a fancy flexible neck light). |
||
Blank partition board for AMC7135 drivers |
FastTech $2.08 for 5 |
Unspecified driver type | N/A | N/A |
|
N/A | 20 mm | Blank board, intended to make multi-AMC7135 drivers easier to put together. Centre opening diameter 5 mm. | ||
Blue Shark |
Sandwich Shoppe $25.00 + shipping |
Boost driver | 2.7-25 V | 1-10 | "Great for use in Mag C & D and fixed lighting applications." | 980 mA |
1 | 19 mm | Boost regulator. Maximum input current 4 A, said by manufacturer to be still efficient >3 A. Regulates on voltage or current, output current adjustable from 50-980 mA (or greater by changing set resistor, although that would remove load protection) at maximum 32 V. Includes copper heatsink; improved thermal performance and higher output voltage over standard Shark. Â I note that Wayne here recommends new buyers to get three. |
|
BoostPuck |
LED Supply $29.99 + shipping |
Boost driver | 5.0-28 V | 4-12 | 85-97% | 350 mA |
1 | 21 mm x 21 mm x 11 mm | Maximum output voltage 48 V. Input voltage must be at least 3 V lower than output voltage. Dimmable with external potentiometer (0-100%) and on board trim adjustment (75-125%). 7 pin SIP interface for PCB mounting; wiring harness optional extra. Output has short circuit protection (15 seconds) and open circuit protection. Â There is a version without the on-board trim adjustment for a little lower cost (the page is wrong where it claims it does have it). |
|
Buck driver 4-pack |
DealExtreme $6.92 for 4 |
Buck driver | 3.6-16 V | 1-4 | 600 mA |
1 | 17 mm | Buyer beware - these are not the AX2002 drivers claimed. They actually use a voltage regulator chip with a varying output current. See DX sku.3256. | ||
Buck driver 4-pack |
FastTech $6.60 for 4 |
Buck driver | 3.6-16 V | 1-4 | 600 mA |
1 | 17 mm | Update Feb-Mar 2015: Buyer beware - the drivers shipped are not the drivers pictured (photos have since been updated); the claimed details (bizarrely taken from the DX site) do not apply. Actually uses a chip marked LEDA 1412 with a SS24 diode and a couple of transistors. The output current is not the 925 mA claimed, but instead varies from 820 mA for one LED to 600 mA for three LEDs in series. Previously: Appears to be identical to the popular DX sku.3256... and even uses DX's description. |
||
Buck Driver 4-pack (v3) |
DealExtreme $8.21 for 4 |
Buck driver | 3.6-16 V | 1-4 | 4+ NiMH, 2+ Li-ion |
81-90% | 600 mA Can be modified to 1000 mA |
1 | 17 mm x 6 mm high | Update Feb-Mar 2015: Buyer beware - DX has posted new photos which shows the same driver as FT sku.1105800. The claimed details are no longer correct; this driver is sadly no longer recommended. Also, the output current is no longer constant, varying from 820 mA with one LED down to 600 mA with three LEDs in series. This a a very sad change. Update Nov 2009: New version using AX2002; now constant current output with 0.27 Ω set resistor, slightly larger diameter. Overhead is ~0.52 V. Test data and discussion here. Tip: The output current can be increased (or decreased) by changing the set resistor appropriately (Rset = 0.25 / current) but the diode is a Schottky SS14, which has a maximum current limit of 1 A. Inexpensive 3 A Schottky diodes are listed here or here (if you want to risk that site). Old version: 16 mm diameter. The details still on the DX site are for this version. Buck regulator using Zetex C310. 800-1000 mA output dependent on input voltage, although a hack for lower output is explained here. When run at lower output it appears reasonably constant current regulated. Test data graph. |
Buck driver with SST-50 |
FastTech $19.55 |
Buck driver | 9-15 V | 1
1 LED included |
3x Li-ion 12 V DC |
|
1 | Output voltage 3-4 V. Unknown driver size. Unknown driver output current. Includes 1 SST-50 LED. |
||
BuckPuck |
luxdrive.com $13.99 to $20.99 + shipping |
Buck driver | 5.0-32 V DC; also works with AC (half available models are for DC, half for AC) |
1-6 | 86-95% | 1000 mA |
1 | 20 mm x 20 mm x 11 mm | Available in many different forms, each with four versions with outputs of 350, 500, 700 or 1,000 mA. Half the forms are designed for low voltage AC, half for DC. Some forms have a built in trim adjustment for 40-110% output, some allow for an external trim adjustment. External connections vary - some forms have the wires built in, while most have from pins (4-7 of them) for PCB mounting. Wiring harnesses are also available, with and without potentiometer for trim adjustment. An additional capacitor across the input may be needed to smooth input power, as described here. Â This retailer (3023; wired version) has good prices and a driver selector tool to help sort out all the varieties. Good luck. |
|
BuckToot |
LED Supply $9.99 + shipping |
Buck driver | 5.0-28 V | 1-6 | 71-94% | 350 mA |
1 | 19 mm x 10 mm diameter | Input voltage must be at least 2 V higher than output voltage. Output has short circuit protection (15 seconds) and open circuit protection. Efficiency is greater the more LEDs it's driving. | |
BX12V-A010-1110 |
DealExtreme $4.90 |
Buck driver | 12-24 V DC; also works with AC | 3 | 12-24 V AC or DC | 85% | 750 mA |
1 | 63 mm x 24 mm x 10 mm | Output voltage 9-12 V. Intended for 3s3p LED arrays. IP67 dust/water rating. |
C8 driver module |
Intl Outdoor Store $15.99 |
Linear regulator | 3.0-5.8 V (for 0.3 V lower Vin see Tip 1 in the notes below) |
1
1 LED included |
1x Li-ion | 50-97% | 2800 mA |
5 | 25 mm x 21 mm high | Suitable as a driver/pill replacement for a C8 torch. 5 modes, mode group selectable with solder bridge. Includes a cool white Cree XM-L in a brass pill. |
CAM 3 channel |
PCB Components $44.00 (approx) |
Buck driver | 10-30 V | 1-8 | 93% | 1000 mA |
1 | 57 mm x 31 mm | Common Anode Multichannel. Powers 3 LED channels with a common anode, up to a maximum power of 25 W per channel. Output current on each channel can be set at 350 mA, 700 mA, or 1000 mA, and dimmed separately using PWM or DC inputs. Reverse polarity protection. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. 4 channel version also available. |
|
CAM 4 channel |
PCB Components $63.00 (approx) |
Buck driver | 10-30 V | 1-8 | 93% | 1000 mA |
1 | 57 mm x 31 mm | Common Anode Multichannel. Powers 4 LED channels with a common anode, up to a maximum power of 25 W per channel. Output current on each channel can be set at 350 mA, 700 mA, or 1000 mA, and dimmed separately using PWM or DC inputs. Reverse polarity protection. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. 3 channel version also available. |
|
CC1W |
TaskLED $15.00 + shipping |
Buck driver | 4.0-30 V | 1-4 | 350 mA |
1 | 25 mm x 20.3 mm | Buck regulator. Constant current output at up to 16 V. Headroom 1 V. | ||
CC5W |
TaskLED $18.00 + shipping |
Buck driver | 4.0-30 V | 1-4 | 1000 mA |
1 | 25 mm x 20.3 mm | Buck regulator. Constant current output 700 mA or 1000 mA, at up to 16 V. Headroom 1.3 V. | ||
superbrightleds.com $5.95 |
Mains driver | 110-120 V AC | 1-4 | 115 V AC mains power | 45-60% | 350 mA |
1 | 42 mm x 40 mm x 22 mm | Output voltage 3.5-18 V. Not suitable for a single red or infrared LED. Horrendous price for international shipping. |
|
CCHIPO v1.2 |
TaskLED $45.00 + shipping |
Boost driver | 4.0-30 V | 2-13 | 84-92% | 2000 mA |
1 | 63 mm x 48 mm | Boost regulator. Vin must be less than Vout. Maximum 5 A input. User adjustable constant current output up to 2 A or 48 V (45 W max). Optional external adjustment. Open circuit protected, but if doing so, LED(s) must not be connected until output has discharged from 48 V. | |
Contact PCB 20.4mm |
Intl Outdoor Store $1.99 for 2 |
Unspecified driver type | N/A | 0 |
|
N/A | 20 mm x 1.3 mm thick | Driver removed from site. Blank board, 20.4 mm diameter. Can be used as a battery contact or for adapting a smaller driver to fit a torch. |
||
Contact PCB 21mm |
Intl Outdoor Store $2.65 |
Unspecified driver type | N/A | 0 |
|
N/A | 21 mm x 1.3 mm thick | Blank board. Can be used as a battery contact or for adapting a smaller driver to fit a torch. | ||
CP-MD004 smart breathing controller |
Sure Electronics $2.50 + shipping |
Step-down (non-buck) driver | 4.8-5.2 V | 1
1 LED included |
5 V internal computer supply | 20 mA |
1 | 45 mm x 27 mm | DIP switch to control speed. Output current is estimate only. | |
Cree MC-E / Seoul P7 driver 5 mode |
DealExtreme $5.62 (formerly $5.70) |
Buck driver | 7.4-8.4 V | 1 | 2x Li-ion | 85% | 2000 mA |
5 | 25 mm - two boards in double layer | Buck regulator using PWM for modes. Double layer board; the 1 mode version plus a mode controller. 5 modes, the order of which multiple users report to be; medium, low, high, strobe, SOS. One user has reported the "strobe" mode is actually a 50% duty cycle flash. No mode memory: "Every switch on, no matter how long or short advances the mode, and if it's left off for more than a minute or two it goes back to full-bright." Claimed constant current output at 2.8A but many buyers have reported the output is not well regulated and/or much lower than the rated output current - around 2.0 A and as low as 1.9 A. Buyer beware! |
Cree MC-E / Seoul P7 driver, 1 mode |
DealExtreme $4.70 |
Buck driver | 4.0-8.4 V | 1 | 6x NiMH, 2x Li-ion |
85% | 2400 mA |
1 | 25 mm | 4th version February 2011: Reported to be equipped with SS34 Schottky diode and provide 2400 mA output. Possibly QX5241A driver chip. 3rd version September 2009: Said by techjunkie to be "a stinker". 2nd version March 2009: Buck regulator, driver chip number obscured/removed. Claimed constant current output at 2.8A but no one has got more than 2260 mA. Techjunkie says it's now well regulated. The Schottky diode used has a current rating of just 2 A. 1st version: Users reported the output current of the older version was not well regulated, and several others reported much lower than the rated output current (as low as 1950 mA was reported). From work techjunkie did here it seemed the driver may have been mainly a voltage regulator not a current regulator. This would allow it to work in parallel but not significantly increase output current. The actual output current would depend on LED Vf, so it's hard to be sure what you'll get. He also said the diameter is actually 26 mm. |
Cree MC-E, Seoul P7 driver |
KaiDomain $10.11 each, also available in 5 pack |
Buck driver | 5.5-15 V DC; also works with AC | 1 | 2800 mA |
3 | 19 mm | Three modes at high, medium (30%), low (10%). Its only reviewer says it needs heatsinking or it will burn out. Buyer beware. Formerly product ID 5595. Also available in a 5 pack, S006371 (formerly product ID 6282). |
||
CX-5117-03D(?) |
FastTech $4.60 for 5 |
User interface driver | 3.0-4.5 V | 1 | 1x Li-ion | 700 mA |
5 | 17 mm | Unknown regulation method. 5 modes; high, medium low, strobe, SOS. | |
D2DIM |
TaskLED $20.00 + shipping |
User interface driver | 2.7-24 V (v1.0 max 16 V v1.1 max 24 V) |
N/A | 3400 mA |
8 | 22 mm | PWM dimming only. This board does no current limiting but can be used in conjunction with other drivers that do. PWM frequency ~800 Hz. Maximum throughput current 3.4-4.5 A depending on temperature. | ||
D2Flex v2 |
TaskLED $21.00 + shipping |
User interface driver | 2.7-24 V | N/A | 6000 mA |
8 | 21 mm | PWM dimming only. This board does no current limiting but can be used in conjunction with other drivers that do. The number of modes varies and can be altered. This board does no current limiting but can be used in conjunction with other drivers that do. PWM frequency ~800 Hz. Maximum throughput current 6 A (version 1 was 3.4-4.5 A depending on temperature). Reverse polarity and output open circuit protected. | ||
D85, 2.3A driver |
CN Quality Goods $8.00 |
Buck driver | 3.1-8.4 V | 1 | 1-2x Li-ion | 2300 mA |
5 | 20 mm x 11 mm high | 5 mode with memory; high, medium (25%), low (5%), strobe, SOS. Low voltage warning for 1 or 2 Li-ion cells. | |
D86, 2.4A square driver |
CN Quality Goods $8.00 + shipping |
Buck driver | 5.5-16 V | 1-3 | 12V automotive | 2400 mA |
3 | 25 mm x 25 mm x 15 mm | 3 modes without memory; high, medium, low. | |
DC-009 |
DealExtreme $3.34 |
User interface driver | 2.8-4.2 V | 1 | 1x Li-ion |
|
5 | 17 mm | 5 modes with memory; high, medium (30%), low (3%), strobe (9 Hz), SOS. Unknown regulation method - probably just PMW without current limiting. | |
Dimming Controller for 12V LED Lights |
DealExtreme $7.80 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 8 A |
1 | 89 mm x 60 mm x 39 mm | Presumed to provide PWM dimming for 12 V DC LED lamps, thus does no current limiting itself. Maximum 96 W power handling. | |
DL-00193 |
DealExtreme $3.70 |
Buck driver | 3.0-9.0 V | 1 | 2x Li-ion | 1000 mA |
5 | 17 mm x 7 mm high - two boards in double layer | 5 modes; high, medium (50%), low (10%), strobe (8 Hz), SOS. | |
DL-002 |
DealExtreme $4.50 |
User interface driver | 2.8-4.2 V | 1 | 1x Li-ion | 3000 mA |
1 | 17 mm | 5 modes, no memory; medium (30%), low (10%), high, strobe (8 Hz), SOS. No regulation - just PMW without current limiting, so the claimed 2000 mA is wrong and a brief review here says it will do more than 3 A with a good battery. The 8 mode version of this, DX sku.106799, has a claimed current range of 2-2.8 A - probably also too low. | |
DL-003 |
DealExtreme $3.72 |
User interface driver | 2.8-4.2 V | 1 | 2800 mA |
1 | 17 mm | 8 modes, and a strange mix they are; low (5%), high, fast strobe (16 Hz), very low (1%), medium strobe (3.3Hz), slow strobe (1 Hz), SOS, police strobe (16 Hz, 1 second off). However, a couple of users claim other modes such as 25% for the first mode, and no mode memory. The stated current range of 2.0-2.8 A implies it might just provide PWM modes without any current limiting. If so that range might be a bit low, and one user claims 4.34 A on high. See also the 5 mode version, DX sku.106796. | ||
DL-004 |
DealExtreme $4.90 |
Buck driver | 5.0-8.4 V | 1 | 2x Li-ion | 2500 mA |
4 | 26 mm x 13 mm high | For a while (around May 2012) this driver was at a clearance price. The driver is back up to its normal price and is still available. 4 modes; high, medium (50%), low (25%), SOS. |
|
DL-005 |
DealExtreme $4.00 |
Buck driver | 5.0-17 V | 1 | 2-4x Li-ion | 2000 mA |
1 | 20 mm x 12mm high - two boards in double layer | 5 modes, no memory; high, low (10%), medium (30%), strobe (8 Hz), SOS. Note that the diameter stated in the title and description was 17 mm (for almost 2 years). | |
DL-006 |
DealExtreme $3.70 |
Buck driver | 3.6-9.0 V | 1 | 1000 mA |
5 | 17 mm x 6 mm high - two boards in double layer | Five modes, weird mode order; medium (30%), low (8%), high, strobe (8 Hz), SOS. | ||
DL-007 |
DealExtreme $3.50 |
Boost driver | 0.8-4.2 V | 1 | 800 mA |
3 | 17 mm | Three mode; high, medium (30%), strobe (9 Hz). Reverse polarity protected. Specs mention "(1 x 123A or 1 x 16340 battery)" but a 16340 li-ion cell would likely cause this boost driver to be in direct drive. | ||
DL-008 |
DealExtreme $4.00 |
Boost driver | 0.9-4.2 V | 1 | 1x AA, 1x 14500 Li-ion |
420 mA |
1 | 17 mm | 5 modes with memory; high, medium (30%), low (3%), strobe (9 Hz), SOS. Claims to be suitable for 1x 14500 cell, but doesn't say if it's in direct drive with that input, relying on the voltage drop of a small Li-ion cell. | |
DMX640A, 4 channel, RGBW LED strip controller |
DealExtreme $37.16 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC mains power | 20 A |
21 | 124 mm x 47 mm x 29 mm | 4 channel, maximum 5 A per channel. 43 mode. IR remote control. | |
DP-18W, (12-18)x1W mains driver |
DealExtreme $5.50 |
Mains bulb driver | 85-265 V AC | 12-18 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 64 mm x 23 m x 21 mm | Output voltage 38-58 V. Note that this voltage represents a shock hazard - use with caution. | |
DP-240, 18W fluoro bulb replacement mains driver |
DealExtreme $4.10 |
Mains bulb driver | 85-265 V AC | 12-24 | 115Â V, 230Â V AC mains power | 240 mA |
1 | 75 mm x 17 mm x 11 mm | Removed from website. Output voltage 38-77 V. Note that this voltage represents a shock hazard - use with caution. |
|
DP-300, mains driver pair |
DealExtreme $4.70 |
Mains bulb driver | 85-265 V AC | 1-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 54 mm x 20 mm x 16 mm | Two separate mains driver. (1-5)x1W driver: Output voltage 3-16 V. (6-12)x1W driver: Output voltage 18-40 V. | |
DRY driver |
CN Quality Goods $5.00 + shipping |
Step-down (non-buck) driver | 3.0-4.2 V | 3 | 3x Li-ion | 2250 mA |
4 | 23 mm | Incomplete specifications given. I believe this is designed for a DRY torch (host available) with 3x XM-L in series, run from 3x Li-ion in series. Buyer beware - do not use this driver with unprotected Li-ion cells in that host. 4 modes with memory; low (0.1 A), medium (0.5 A), high (2.25 A), turbo (direct drive, maximum 4-5 A). Turbo mode steps down to high mode after 20 seconds. |
|
forum.fonarevka.ru $16.00 (approx) |
Linear regulator | 2.8-5.5 V | 1 | 1x Li-ion | 120 mA |
2 | 14 mm | Linear regulator. Two modes, low (20 mA), medium (120 mA). Power interruption of less than 0.5 seconds is ignored. Power interrupted for 0.75 seconds or more changes modes. No power for 2 minutes or more resets to low mode. | ||
CPF member $47.50 (approx) |
Buck driver | 6.0-20 V | 1-4 | 89-98% | 5000 mA |
1 | 26 mm x 13 mm high | Available direct from a CPF member. Input cut-off voltage is 4.5 V but output current will decrease under 6 V input. | ||
CPF member $47.50 (approx) |
Buck driver | 6.0-20 V | 1-4 | 89-98% | 9 A |
1 | 26 mm x 13 mm high | Available direct from a CPF member. Input cut-off voltage is 4.5 V but output current will decrease under 6 V input. | ||
CPF member $54.00 (approx; actual €41) + shipping |
Buck driver | 6.0-22 V | 1-4 | 89-98% | 9 A |
1 | 23 mm x 13 mm high | Available direct from a CPF member. Input cut-off voltage is 4.5 V but output current will decrease under 6 V input. Output current adjustable with potentiometer, in the range 0.5-9.0 A (or possibly 0.5-5.0 A). Input voltage must be at least 2V above output voltage. | ||
E27 1-3*1W driver |
DealExtreme $5.90 for 2 |
Mains bulb driver | 95-265 V AC | 1-3 | 115 V or 230 V AC mains power | 320 mA |
1 | 26 mm x 15 mm x 15 mm | Output current is a guess. Claimed to work with 1-3 LEDs but claimed output voltage of 9-12 V does not allow for 1 or 2 LED operation. | |
E27 10W driver |
DealExtreme $3.99 |
Mains bulb driver | 95-265 V AC | 10 | 115 V or 230 V AC mains power | 300 mA |
1 | 36 mm x 15 mm x 15 mm | Output voltage 32-36 V. | |
East-092, PWM driver |
FastTech $3.07 |
User interface driver | 3.0-4.2 V | 1 | 1x Li-ion | 4000 mA |
5 | 17 mm | Direct drive. 5 modes; high, medium (1 kHz), low (5-6 kHz), strobe, SOS. | |
EC-LED-15A-RF20B, RGB LED strip controller |
DealExtreme $10.50 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 7500 mA |
1 | 85 mm x 52 mm x 12 mm | 3 channel, maximum 2.5 A per channel, constant 2 A per channel. RF remote control (which looks like it has an LED in the front end). | |
EC-LED-15A-RF20B, RGB LED strip controller |
DealExtreme $15.30 |
User interface driver | 12-24 V | 1-3 | 12 V or 24 V DC | 12 A |
1 | 130 mm x 64 mm x 24 mm | 3 channel, maximum 4 A per channel. RF remote control. | |
EOSlamp 100 |
Intl Outdoor Store $7.85 |
Boost driver | 1.0-3.2 V | 1 | 1-2x AA, 1x LiFePO4 |
500 mA |
4 | 17 mm | Driver removed from site. Minimum input voltage is just a guess. 4 modes with 3 second mode memory; very low (7 mA), medium (100 mA), high, strobe. Polarity protection. Potted components (they're covered with goop). |
|
EOSlamp 160 |
Intl Outdoor Store $7.85 |
Boost driver | 1.0-3.2 V | 1 | 1-2x AA, 1x LiFePO4 |
500 mA |
4 | 17 mm | Driver removed from site. Minimum input voltage is just a guess. 4 modes with 3 second mode memory; very low (7 mA), medium (160 mA), high, strobe. Polarity protection. Potted components (they're covered with goop). |
|
ET27, 3x1W |
KaiDomain $3.39 for 2 |
Mains driver | N/A AC (Unknown mains voltage) |
3 | 350 mA |
1 | 30 mm x 23 mm x 13 mm | Incomplete and/or stupid specifications given. The presence of a transformer implies a mains driver but NO specs are given (except "350mAh" instead of mA in the title). How do they expect to sell them? Formerly product ID 10939. |
||
ET27, 5x1W |
KaiDomain $4.75 for 2 |
Mains driver | N/A AC (Unknown mains voltage) |
5 | 350 mA |
1 | 30 mm x 28 mm x 17 mm | Incomplete and/or stupid specifications given. The presence of a transformer implies a mains driver but NO specs are given (except "350mAh" instead of mA in the title). How do they expect to sell them? Formerly product ID 10940. |
||
F4D7W-C-S, (4-7)x1W mains driver |
DealExtreme $4.82 |
Mains driver | 100-265 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 78 mm x 31 mm x 20 mm | Output voltage 10-30 V. | |
Fatman |
TaskLED $22.00 + shipping |
Boost driver | 2.7-12 V | 1-4 | 80-96% | 1000 mA |
1 | 20 mm | Boost regulator. Vin must be less than Vout. User adjustable constant current at 3-16 V, up to 1000 mA. Optional external adjustment. Must always have a load connected. | |
FLuPIC v2.2 |
CPF member $40.00 |
Unspecified driver type | N/A | N/A |
|
5 | There's a user guide for the many modes here but not actual specifications, and its maker on CPF doesn't link to its specs (or the latest firmware version) in his tagline. Go figure. | |||
FMW-(9-12)x1W mains driver |
FastTech $6.73 |
Mains driver | 85-265 V AC | 9-12 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 78 mm x 30 mm x 21 mm | Output voltage 27-42 V. (Yes, this one does say "FMW".) | |
Fulree 2203 adj CV supply |
DealExtreme $6.40 |
Unspecified driver type | 3.0-22 V | 1-5 | 12 V DC | 3000 mA |
1 | 31 mm x 25 mm x 20 mm | This is a constant voltage power supply, not a constant current LED driver, and is only included because it looks like an LED driver. LEDs should be driven with something to limit the current, such as a resistor. Output voltage 1-15 V. Input needs to be at least 2 V greater than output. | |
FWM-(3-7)x1W, mains driver |
FastTech $5.51 |
Mains driver | 175-265 V AC | 3-7 | 230 V AC mains power | 300 mA |
1 | 80 mm x 30 mm x 21 mm | Output voltage 9-24 V. (Yes, this one does say "FWM".) | |
FY-50W (8-10)x5W main driver |
DealExtreme $17.86 |
Mains driver | 85-265 V AC | 8-10 | 115Â V, 230Â V AC mains power | 88-90% | 1500 mA |
1 | 135 mm x 38 mm x 28 mm | Output voltage 24-36 V. IP67 dust/water rating. |
GCF315D-1509LD, 12W mains driver |
DealExtreme $61.30 |
Mains driver | 100-240 V AC | 6
120 LEDs included |
115 V or 230 V AC mains power | 900 mA |
1 | Maximum output voltage 22 V. 120 low power white LEDs included (in an aluminium downlight). |
||
GD |
Sandwich Shoppe $18.00 - $20 + shipping |
Boost driver and buck driver | 1.8-5.4 V | 1 | 85-93% | 1000 mA |
1 | 14 mm | Buck/boost regulator. Constant current output, board available as a "blank" (add one or two SMT set resistors), or preset to 500 mA, 750 mA, or 1000 mA. Maximum output voltage 5.4 V. Must always have a load connected. | |
GDuP |
Sandwich Shoppe $48.00 + shipping |
Boost driver and buck driver | 1.8-5.4 V | 1 | 2-3x alkaline, 1x Li-ion |
700 mA |
3 | 14 mm | Three modes; default set 10 mA, 180 mA, 700 mA. Levels can be changed for an extra charge. Mode memory. | |
GDuP high output |
Sandwich Shoppe $49.80 + shipping |
Boost driver and buck driver | 1.8-5.4 V | 1 | 2-3x alkaline, 1x Li-ion |
1200 mA |
3 | 14 mm | Three modes; default set 20 mA, 180 mA, 1.2 A. Levels can be changed for an extra charge. Mode memory. | |
GKDY09, 10x3W mains driver |
DealExtreme $5.20 |
Mains bulb driver | 85-265 V AC | 10 | 115Â V, 230Â V AC mains power | 600 mA |
1 | 55 mm x 22 mm x 20 mm | Output voltage 30-35 V. May fit in larger bulb housings. | |
GKDY15, (9-18)x1W mains driver |
DealExtreme $5.00 |
Mains bulb driver | 85-265 V AC | 9-18 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 52 mm x 20 mm x 18 mm | Output voltage 25-60 V. May fit in larger bulb housings. | |
GT666, RGB LED strip controller |
DealExtreme $24.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
N/A | 113 mm x 49 mm x 23 mm | 3 channel, maximum 6 A per channel. RF remote control. | |
GU10 3W 220V mains driver |
DealExtreme $2.70 |
Mains bulb driver | 220-240 V AC | 1-3 | 230 V AC mains power | 300 mA |
1 | 22 mm x 15 mm x 13 mm | Transformer with buck regulator. Called a GU10 driver but does not itself have the bayonet pins of the GU10 connector. Incomplete specifications given. Presumably it can drive 3 LEDs because it's called a "3W" driver. | |
GU10 mains driver, 1x 1 W |
DealExtreme $3.09 (down from $3.32) |
Mains bulb driver | 85-265 V AC | 1 | 115Â V or 230Â V AC mains power | 25% | 350 mA |
1 | 22 mm x 15Â mm x 14Â mm | Transformer with buck regulator. Constant current out 320-350 mA. Reported to not be very efficient (not normally a major problem for mains power). These are called GU10 drivers but do not themselves have the bayonet pins of the GU10 connector. Efficiency figure from a review. |
GU10 mains driver, 1x 3 W |
DealExtreme $2.91 (down from $3.10, down from $3.32) |
Mains bulb driver | 85-265 V AC | 1 | 115Â V or 230Â V AC mains power | 650 mA |
1 | 23 mm x 15Â mm x 15Â mm | Transformer with buck regulator. Claimed constant current out 650-700 mA, actual might be as low as 620 mA. Reported to not be very efficient (not normally a major problem for mains power). These are called GU10 drivers but do not themselves have the bayonet pins of the GU10 connector. | |
GU10 mains driver, 3x1W |
DealExtreme $3.32 |
Mains bulb driver | 85-265 V AC | 3 | 115Â V or 230Â V AC mains power | 43-75% | 300 mA |
1 | 23 mm x 17Â mm x 17Â mm | Transformer with buck regulator. Called a GU10 driver but does not itself have the bayonet pins of the GU10 connector. Output current 300 mA @ approx. 9-10 V. Efficiency figures from reviews. |
GU10/E27 3W mains driver |
DealExtreme $3.90 |
Mains bulb driver | 90-265 V AC | 3 | 115 V or 230 V AC mains power | 90% | 315 mA |
1 | 23 mm 17 mm x 13 mm | Output voltage 8-11 V. Actual output current 300-315 mA. Claimed at least 90% efficient. Does not include a GU10 or E27 connector. |
GY-DB-4W mains driver and 4x1W LED board |
DealExtreme $7.00 |
Mains driver | 100-240 V AC | 4
4 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | 29 mm x 16 mm x 14 mm | Output current is a guess. Includes 4 LEDs on a round aluminium board. |
|
GZXTY06, (1-3)x1W mains driver |
DealExtreme $3.90 |
Mains bulb driver | 90-265 V AC | 1-3 | 115 V or 230 V AC mains power | 350 mA |
1 | 26 mm x 15 mm x 15 mm | Output voltage 9-12 V. | |
GZXTY08, (6-9)x3W mains driver |
DealExtreme $6.90 |
Mains driver | 180-265 V AC | 6-9 | 230 V AC mains power | 650 mA |
1 | 53 mm x 22 mm x 20 mm | Output voltage 18-30 V. | |
H6CC |
TaskLED $32.00 + shipping |
Buck driver | 8.1-24 V | 1-5 | 80-95% | 6700 mA |
1 | 31 mm x 9Â mm high | Formerly called H5CC. Suitable for SST-50. Output current variable from 20 mA up to 6.7 A. Overhead is 1.0 V at 5 A output. Not suitable for connecting multiple drivers in parallel. First 20 units have a maximum input of 20 V. Information thread here. | |
H6Flex |
TaskLED $40.00 + shipping |
Buck driver | 7.0-21 V | 1-6 | 90% | 6600 mA |
5 | 33 mm | Features uController UI, "User menu reconfigurable to 1400mA/Â2000mA/Â2800mA/Â3600mA/Â5000mA/Â5600mA or 6600mA at any time." Ships configured for 1.4 A output. Input voltage needs to be at least 1 V higher than output voltage (at 2.8 A). | |
H7900, 3x3W mains driver |
FastTech $5.70 |
Mains driver | 85-245 V AC | 3 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 50 mm x 28 mm x 22 mm | Output current is a guess, output voltage range unknown - buyer beware. | |
H9180B, (5-6)x3W mains driver |
FastTech $6.53 |
Mains driver | 100-240 V AC | 5-6 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 65 mm x 32 mm x 24 mm | Output voltage 15-22 V. | |
HD 1x1W |
DealExtreme $12.70 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 300 mA |
1 | Output 6-12V. 1 blue LED included (in a fancy aluminium holder). |
||
HD 3x1W |
DealExtreme $13.20 |
Mains driver | 85-265 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | 3 white LED included (in a fancy aluminium downlight). | ||
HD-L(1-3)x1W |
DealExtreme $13.40 |
Mains driver | 100-240 V AC | 1-3
3 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output current listed here is a guess. 3 white LEDs included (in an aluminium anodised downlight). |
||
HDX (4-5)x1W mains driver |
DealExtreme $3.10 |
Mains bulb driver | 100-240 V AC | 4-5 | 115 V or 230 V AC mains power | 280 mA |
1 | 25 mm x 16 mm x 12 mm | Buyer beware. Output voltage range initially not stated, then claimed to be 12.3-12.5 V, then defended as being 12.3-12.5 V. Not if it can drive 4 or 5 LEDs! | |
HDX 0812A (8-12)x1W mains driver |
DealExtreme $6.40 |
Mains driver | 100-240 V AC | 8-12 | 115 V or 230 V AC mains power | 350 mA |
1 | 77 mm x 29 mm x 22 mm | Output voltage 24-45 V | |
HDX 12VAC |
DealExtreme $9.00 |
Buck driver | 12-12 V DC; also works with AC | 1
1 LED included |
330 mA |
1 | Product is labelled "AC12" and hence DX description says it accepts 12 V. Output current stated on driver is likely an error and should probably be 330 mA. Output 2-5 V. 1 blue LED included (in a fancy aluminium holder). |
|||
HDX 1x1W |
DealExtreme $3.30 |
Mains bulb driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 260 mA |
1 | 50 mm x 27 mm x 21 mm | Output voltage 3.0-3.8 V. | |
HDX 7x1W mains driver |
DealExtreme $6.20 |
Mains bulb driver | 100-240 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 40 mm x 16 mm x 14 mm | Output voltage 12-25 V. | |
HDX-0103B |
DealExtreme $11.10 |
Mains driver | 85-245 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output current 310-350 mA, output 6-12 V (although the driver label has the box dotted for 2-5 V output). 3 white LEDs included (in a fancy golden coloured aluminium downlight). |
||
HDX-01A |
DealExtreme $5.40 |
Mains driver | 100-245 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 330 mA |
1 | Output current stated on driver (660 mA) is an error. Output voltage 2-5 V. 1 white LED included (in an aluminium downlight). |
||
HDX-01A 220V |
DealExtreme $9.70 |
Mains driver | 220-240 V AC | 1
1 LED included |
230 V AC mains power | 330 mA |
1 | Product is labelled "220V". Output current stated on driver is likely an error and should probably be 330 mA. Output voltage 2-5 V @ claimed 310-350 mA. 1 warm white LED included (in a fancy aluminium holder). |
||
HDX-10812A, (8-12)x1W mains driver |
DealExtreme $14.60 |
Mains driver | 100-240 V AC | 8-12
12 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 24-48 V. Includes 12 LEDs on a 78 mm diameter aluminium board. |
||
HDX-1218A(8-12)x1W |
DealExtreme $9.30 |
Mains driver | 100-240 V AC | 12-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 100 mm x 30 mm x 20 mm | Output voltage 36-65 V. Note that this voltage represents a shock hazard - use with caution. IP67 dust/water rating. | |
HDX-1218C, 20W mains driver |
DealExtreme $10.20 |
Mains driver | 100-240 V AC | 9-12 | 115 V or 230 V AC mains power | 600 mA |
1 | 100 mm x 29 mm x 20 mm | Output voltage 27-36 V. IP67 dust/water rating. | |
HDX-I0407A |
DealExtreme $17.90 |
Mains driver | 100-245 V AC | 4-7
5 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 12-25 V. 5 warm white LEDs included (in a blue aluminium downlight). Also available with a different 5 LED downlight, a 6 blue LED downlight and a 7 LED downlight. |
||
HDX-I0812A(4-7) red |
DealExtreme $22.00 |
Mains driver | 100-240 V AC | 4-7
6 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 12-25 V. 6 warm white LEDs included (in an aluminium downlight). Also available with a 7 LED downlight. |
||
HDX-I0812A(4-7) silver |
DealExtreme $22.60 |
Mains driver | 100-240 V AC | 4-7
5 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 12-25 V. Plain aluminium case. 5 LEDs included (in a fancy aluminium holder) which are reported to be red, green, blue, cool white and warm white; it seems a warm white LED is pictured. |
||
HDX-I0812A(8-12) red |
DealExtreme $28.80 |
Mains driver | 100-240 V AC | 8-12
12 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 24-45 V. 12 warm white LEDs included (in an aluminium downlight). |
||
HDX-PF4060, 50W mains driver |
DealExtreme $20.00 |
Mains driver | 100-240 V AC | 9-11 | 115 V or 230 V AC mains power | 88% | 1500 mA |
1 | 150 mm x 36 mm x 28 mm | Output voltage 27-36 V. IP67 dust/water rating. |
HDX-S0103A (2-3)*1W |
DealExtreme $10.90 |
Mains driver | 100-245 V AC | 2-3
3 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 6-12 V. Driver has 85-265 V AC input on it. 3 warm white LEDs included (in an aluminium downlight). |
||
HF9180, 12x1W mains driver |
FastTech $6.93 |
Mains driver | 100-265 V AC | 12 | 115Â V, 230Â V AC mains power | 320 mA |
1 | 66 mm x 32 mm x 25 mm | Output current is a guess, output voltage range unknown - buyer beware. | |
HG-PC2207B, (6-10)x1W mains driver |
DealExtreme $3.70 |
Mains driver | 90-260 V AC | 6-10 | 115 V or 230 V AC mains power | 300 mA |
1 | 58 mm x 30 mm x 22 mm | Output voltage 18-36 V. | |
Hi-Max HM-ST50D |
LCK-LED $12.00 + shipping |
Buck driver | 5.0-8.4 V | 1 | 2x Li-ion | 4200 mA |
5 | 20 mm x 17 mm high - two boards in double layer | Five modes - medium (30%), low (10%), high (100%), 9 Hz strobe, SOS. | |
hipCC |
TaskLED $24.00 + shipping |
Buck driver | 4.5-25 V | 1-5 | 77-97% | 2800 mA |
1 | 28 mm | Limited supply. Buck regulator. Constant current output 2.8 A. Headroom 0.5 V. Thermal protection, polarity protection. Single mode but can be driven using a separate PWM driver. | |
hipFlex v1.1A |
TaskLED $35.00 + shipping |
Buck driver | 4.5-24 V | 1-6 | 73-95% | 2800 mA |
1 | 36 mm | Buck regulator, can drive up to 22 V of series connected LEDs. Constant current output user reconfigurable at any time to 1.0/1.4/2.0/2.4/2.8 A. Headroom 0.5 V @ 2.8 A. Thermal protection, polarity protection. | |
HL10W, 10W mains driver |
DealExtreme $7.40 |
Mains driver | 85-265 V AC | 2-4 | 115 V or 230 V AC mains power | 72% | 900 mA |
1 | 63 mm x 28 mm x 20 mm | Output voltage 5-12 V. IP66 dust/water rating. Possibly has short circuit protection. |
HLY-JV0206A |
DealExtreme $29.20 |
Mains driver | 100-240 V AC | 1-6
6 LEDs included |
115 V or 230 V AC mains power | 320 mA |
1 | Output 4-20 V. 6 white LEDs included (in a fancy acrylic downlight). |
||
HS1685B, "700mA" buck driver |
FastTech $2.93 |
Buck driver | 3.0-8.4 V | 1 | 2x Li-ion | 3000 mA |
5 | 17 mm x 7 mm high - two boards in double layer | 5 modes in an unusual order; high, medium, strobe, SOS, low. The driver is claimed to be 700 mA but the test data listed gives about 3 A: "We have been testing multiple drivers from multiple batches, and results repeatedly show ~3A output, while the manufacturer insists 0.7A." - buyer beware. The test data indicates output current drops with less than 4.5 V input, but one of the reviews says it went up to 3.94 A with two Li-ion cells. With the other review saying his one just glowed and died with a funny smell, this is a driver for masochists. | |
HX-1105b5 with SST-50 |
FastTech $15.15 |
Buck driver | 9-15 V | 1
1 LED included |
12 V DC | 5000 mA |
5 | 26 mm | Output voltage 3-3.7 V. Specs elsewhere indicate input voltage is 3-18 V, and output current may be any where from 3 A to 5 A - buyer beware. Probably 5 modes; low (10%), medium (50%), high, strobe, SOS. Includes a Luminous SST-50 warm white LED. |
|
HX-1175b1 buck driver |
FastTech $25.92 |
Buck driver | 9-15 V | 1
1 LED included |
12 V DC | 9 A |
5 | 32 mm | Output voltage 3-3.7 V. Specs else where indicate input voltage is 3-18 V and output current 7 A - buyer beware. Probably 5 modes in Impractical Reverse Order; high, medium (50%), low (10%), strobe, SOS. Includes a Luminous SST-90 warm white LED. |
|
HX-1182, buck driver |
DealExtreme $3.60 |
Buck driver | 7.0-18 V | 1-3 | 2-4x Li-ion | 90% | 1500 mA |
4 | 22 mm x 19 mm high | Buyer beware - originally listed with many conflicting specs. Output current 0.8-1.5 A (which sounds very unregulated). Output voltage 3.0-8.4 V sounds suspiciously like an input voltage for 1 or 2 Li-ion cells. Output supposedly suitable for 1 or 3 LEDs. 4 mode; high (1.5 A), medium (1.2 A), low (0.8 A), fast strobe. Polarity protection. |
HX-1190B5 (Olympia), 6A 4 mode buck |
DealExtreme $5.10 |
Buck driver | 7.0-18 V | 1 | 3-4x Li-ion | 90% | 6000 mA |
4 | 28 mm | Buyer beware - may actually be a boost driver with much less than 6 A output. 4 mode with 3 second memory; high (6 A), medium (4 A), low (2 A), fast strobe. Formerly claimed 5 modes, including "Close" (SOS?). Formerly claimed to be suited for 1 to 3 LEDs in series. Formerly claimed 30 mm diameter. Output voltage 3.3-10 V. Polarity protection. Appears to have LEDs for indicating battery voltage. For a 4 A version see DX sku.231788. |
HX-1297b, 4A 4 mode buck |
DealExtreme $4.40 |
Buck driver | 7.0-18 V | 1-3 | 3-4x Li-ion | 90% | 4000 mA |
4 | 30 mm | Buyer beware - appears to be designed for two separate LEDs at ~1 A and ~1.5 A, not a single LED at 4 A total. 4 mode with 3-second memory; high (4 A), medium (2 A), low (0.1 A), fast strobe. Formerly claimed 5 modes, including "Close" (SOS?). Output voltage 3.3-10 V. The board looks like it has places for battery indicator LEDs but they are populated with resistors. Polarity protection. For a 6 A version see DX sku.231936 or for a 4 A version with battery status LEDs see DX sku.236160. |
HX-1341, 4A 4 mode buck |
DealExtreme $5.20 |
Buck driver | 7.0-18 V | 1-3 | 3-4x Li-ion | 90% | 4000 mA |
4 | 28 mm | 4 mode with 3 second memory; high (4 A), medium (2 A), low (100 mA), fast strobe. Formerly claimed 5 modes, including "Close" (SOS?). Output voltage 3.3-10 V. Polarity protected. There are two battery status LEDs are on the board. |
HXY-1524W, (15-24)x1W |
DealExtreme $5.20 |
Mains driver | 85-265 V AC | 15-24 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 310 mm x 39 mm x 24 mm | Output voltage 44-86 V. Note that this voltage represents a shock hazard - use with caution. Note that the length is the cable length, not the driver length. | |
HXY-LP(12-20)x1W mains driver |
DealExtreme $6.59 |
Mains driver | 85-277 V AC | 12-20 | 115Â V, 230Â V AC mains power | 88% | 300 mA |
1 | x 25 mm x 20 mm | Output voltage 30-68 V. Note that this voltage represents a shock hazard. IP67 dust/water rating. Size of driver not stated. |
HXY-LP(5-10)x2W mains driver |
DealExtreme $5.15 |
Mains driver | 85-277 V AC | 5-10 | 115Â V, 230Â V AC mains power | 600 mA |
1 | 70 mm x 25 mm x 20 mm | Output voltage 12-34 V. IP67 dust/water rating. | |
HXY-LP(7-12)x1W mains driver |
DealExtreme $4.77 |
Mains driver | 85-277 V AC | 7-12 | 115Â V, 230Â V AC mains power | 88% | 300 mA |
1 | 60 mm x 25 mm x 20 mm | Output voltage 21-42 V. IP67 dust/water rating. Size of driver not stated. |
HY-20W-AS mains driver |
DealExtreme $6.99 |
Mains driver | 100-240 V AC | 8-12 | 115 V or 230 V AC mains power | 85% | 600 mA |
1 | 83 mm x 37 mm x 24 mm | Output voltage 24-36 V. IP65 dust/water rating. |
HY-30W-AS mains driver |
DealExtreme $9.40 |
Mains driver | 100-240 V AC | 8-11 | 115 V or 230 V AC mains power | 900 mA |
1 | 97 mm x 36 mm x 28 mm | Output voltage 24-36 V. IP65 dust/water rating. | |
HY-B3, 2-3*3W mains driver |
Focalprice $5.11 |
Mains driver | 180-265 V AC | 2-4 | 230 V AC mains power | 75% | 600 mA |
1 | 55 mm x 30 mm x 25 mm | Output voltage 6-13 V. Claims to be suitable for ES27/GU10 bulbs but that's unlikely considering its size. |
HY03W, mains driver |
DealExtreme $6.00 |
Mains driver | 100-240 V AC | 1-3
1 LED included |
115 V or 230 V AC mains power | 300 mA |
1 | 38 mm x 26 mm x 22 mm | Output voltage 3-12 V. Includes 3 dice COB LED. |
|
Hyperboost v1.0 |
TaskLED $40.00 + shipping |
Boost driver | 8.0-50 V | 3-23 | 88-92% | 1400 mA |
1 | 36 mm | Boost driver, input voltage must be less than output voltage. Maximum output 80 V. Adjustable output current limit. Input current less than 5 A for optimal performance. Has open circuit and reverse polarity protection. (Note that if turned on while open circuit, output will rise to 80 V - shock hazard.) Previous version (pre Feb 2010) maximum 1.3 A output. |
|
Hyperboost V2.0 |
TaskLED $40.00 + shipping |
Boost driver | 8.0-50 V | 5-23 | 3200 mA |
1 | 33 mm | Output voltage 80 V maximum. Note that this voltage represents a shock hazard - use with caution. PWM input. Open circuit protection. Technical info here. | ||
Hyperbuck v1.0 |
TaskLED $40.00 + shipping |
Buck driver | 8.0-80 V | 1-15 | 1500 mA |
1 | 36 mm x 31 mm | Maximum output voltage 50 V. Output open circuit and short circuit protected; reverse polarity protected. Supports external potentiometer for dimming. Vin must be at least 2 V greater than Vf. | ||
IHX-1183A, 700mA |
FastTech $3.98 |
Buck driver | 3.0-4.2 V | 1
1 LED included |
1x Li-ion | 700 mA |
1 | 20 mm | Output voltage 3.2-3.8 V. Includes a Cree XR-E (Q3 bin) cool white LED. |
|
IHX-1183A, 900mA |
FastTech $3.75 |
Buck driver | 3.0-4.2 V | 1
1 LED included |
1x Li-ion | 900 mA |
1 | 20 mm | Output voltage 3.2-3.8 V. Includes a Cree XP-G (R5 bin) warm white LED. |
|
IS1006 |
CPF member $25.00 + shipping |
Linear regulator | 3.0-12 V | 1-4 | 4x NiMH "is probably the best configuration available" | 10 A |
2 | 26 mm | The specs for this driver listed in this table may not be correct, as incomplete specs are listed in the sales thread and the specs thread isn't linked from it. (It might be this one but it has conflicting specs from the few that are actually listed in the sales thread.) Different versions are available, with high mode 5 A, 8 A or 10 A, and low mode from 1.2 A up. Switching between modes required a toggle switch or potentiometer (not included). Driver draws 0.5 mA when off. | |
JCFDBG-3-7W(3D) mains driver |
DealExtreme $4.92 |
Mains driver | 100-265 V AC | 3-7 | 115 V or 230 V AC mains power | 300 mA |
3 | 78 mm x 32 mm x 21 mm | Output voltage 9-25 V. Dimmable. Apparently two outputs. | |
JCFDBG8-12W(3D), (8-12)x1W mains driver |
DealExtreme $8.21 |
Mains driver | 100-265 V AC | 8-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 110 mm x 45 mm x 25 mm | Output voltage 24-42 V. | |
JDJX/015 |
DealExtreme $50.60 |
Mains driver | 85-265 V AC | 9-10
160 LEDs included |
115 V or 230 V AC mains power | 600 mA |
1 | Output voltage 27 V. 160 (1/10 W) warm white LEDs included (in an aluminium downlight). |
||
JH-002A |
DealExtreme $3.93 |
MR16 (buck) driver | 10-20 V | 3 | 3000 mA |
1 | 75 mm x 10 mm x 6 mm | Output voltage 9.0-9.5 V. Dimmable, 1.5-5.0 V control signal. Buyer beware - claims to be a boost driver, and output current is suspect. | ||
JHX(7-10)x1W mains driver |
DealExtreme $8.99 |
Mains driver | 90-265 V AC | 7-10
1 LED included |
115 V or 230 V AC mains power | 88-89% | 280 mA |
1 | 75 mm x 18 mm x 18 mm | Output voltage 19-36 V, clearly visible on driver. Unfortunately, DX has chosen to not make the claimed specs self consistent or consistent with the driver photos - buyer beware. Warm white 9s1p LED array included. |
JHX-(10S2P) 20W, mains driver |
DealExtreme $8.70 |
Mains driver | 176-265 V AC | 9-12 | 115 V or 230 V AC mains power | 88-89% | 600 mA |
1 | 107 mm x 29 mm x 22 mm | Output voltage 27-37 V. Claimed waterproof but no IP rating. |
JHX-(10S2P) 20W, mains driver |
DealExtreme $8.70 |
Mains driver | 176-265 V AC | 9-12 | 115 V or 230 V AC mains power | 88-89% | 600 mA |
1 | 107 mm x 29 mm x 22 mm | Output voltage 27-37 V. Claimed waterproof but no IP rating. |
JHX-(7-10)x1W, mains driver |
DealExtreme $9.19 |
Mains driver | 90-265 V AC | 7-10
1 LED included |
115 V or 230 V AC mains power | 88% | 280 mA |
1 | 100 mm x 30 mm x 20 mm | Output voltage 19-36 V. Stated dimensions are incorrect. 9S1P or 10S1P LED array included (not shown in product photos). |
JIAWEN 100W mains driver |
DealExtreme $23.51 |
Mains driver | 85-265 V AC | 10 | 115Â V, 230Â V AC mains power | 90% | 3000 mA |
1 | 145 mm x 55 mm x 40 mm | Intended for 10S10P LED plates. Output voltage 30-36 V. IP67 dust/water rating. |
JK 360150, 50W 1.5A waterproof mains driver |
goodluckbuy.com $29.29 |
Mains driver | 100-240 V AC | 9-12 | 115 V or 230 V AC mains power | 1500 mA |
1 | Output voltage 30-36 V. IP67 dust/water rating. | ||
JK 360300, 3 A, 100 W waterproof mains driver |
goodluckbuy.com $72.46 |
Mains driver | 100-240 V AC | 10-12 | 115 V or 230 V AC mains power | 3000 mA |
1 | Output voltage 30 V in claimed specs, 36 V on driver case label. IP67 dust/water rating. | ||
JK 360360100, 30W 1A waterproof mains driver |
goodluckbuy.com $21.13 |
Mains driver | 100-240 V AC | 9-12 | 115 V or 230 V AC mains power | 1000 mA |
1 | Output voltage 30-36 V. IP67 dust/water rating. | ||
JK007, 7W mains driver |
DealExtreme $5.10 |
Mains driver | 100-240 V AC | 2-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 42 mm x 23 mm x 20 mm | Output voltage 6-24 V. | |
JK030, 25W waterproof mains driver |
DealExtreme $14.40 |
Mains driver | 100-240 V AC | 3 | 115 V or 230 V AC mains power | 2000 mA |
1 | 100 mm x 42 mm x 29 mm | Output voltage 8-12V. IP67 dust/water rating. | |
JK100120800, 100W waterproof mains driver |
DealExtreme $29.70 |
Mains driver | 100-240 V AC | 3 | 115 V or 230 V AC mains power | 8 A |
1 | 155 mm x 68 mm x 40 mm | Output voltage 8-12 V. IP67 dust/water rating. | |
JK120120100, 120W waterproof mains driver |
DealExtreme $36.30 |
Mains driver | 100-240 V AC | 3 | 115 V or 230 V AC mains power | 10 A |
1 | 185 mm x 68 mm x 40 mm | Output voltage 8-12 V. IP67 dust/water rating. | |
JK150120125, 150W waterproof mains driver |
DealExtreme $44.10 |
Mains driver | 100-240 V AC | 3 | 115 V or 230 V AC mains power | 12.5 A |
1 | 200 mm x 68 mm x 40 mm | Output voltage 8-12 V. IP67 dust/water rating. | |
JK360360100, waterproof |
DealExtreme $19.81 |
Mains driver | 100-240 V AC | 9-12 | 115Â V or 230Â V AC mains power | 1000 mA |
1 | 136 mm x 38 mm x 25 mm | Output voltage 30-36 V. IP67 dust/water rating. | |
JNY-JC10WB, (3S3P)x1W mains driver |
FastTech $4.80 |
Mains driver | 100-240 V AC | 3 | 115 V or 230 V AC mains power | 900 mA |
1 | 98 mm x 38 mm x 29 mm | Output voltage 6-10 V. | |
JNY-JC20W, (10S2P)x1W mains driver |
FastTech $7.96 |
Mains driver | 100-240 V AC | 7-12 | 115 V or 230 V AC mains power | 600 mA |
1 | 98 mm x 38 mm x 29 mm | Output voltage 18-40 V. | |
JNY-L0103A, (1-3)x1W mains driver |
DealExtreme $4.99 |
Mains driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 300 mA |
1 | 60 mm x 28 mm x 23 mm | Output voltage 2-13 V. | |
JNY-L0305A, (3-5)x1W mains driver |
DealExtreme $5.42 |
Mains driver | 100-240 V AC | 3-5 | 115 V or 230 V AC mains power | 300 mA |
1 | 65 mm x 28 mm x 22 mm | Output voltage 9-18 V. | |
JNY-L0912A yellow case, (9-12)x1W mains driver |
FastTech $6.71 |
Mains driver | 100-240 V AC | 9-12 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 95 mm x 30 mm x 20 mm | Output voltage 34-45 V. | |
FastTech $7.27 |
Mains driver | 100-240 V AC | 12-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 130 mm x 27 mm x 18 mm | Output voltage 36-69 V. Note that this voltage represents a shock hazard - use with caution. | ||
JNY-LO103A, (1-3)x1W mains driver |
FastTech $3.57 |
Mains driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 300 mA |
1 | 130 mm x 27 mm x 18 mm | Output voltage 2-13 V. | |
JNY-LO305A, (3-5)x1W mains driver |
FastTech $4.11 |
Mains driver | 100-240 V AC | 3-5 | 115 V or 230 V AC mains power | 300 mA |
1 | 130 mm x 27 mm x 18 mm | Output voltage 9-18 V. | |
JNY-LO609A, (6-9)x1W mains driver |
FastTech $4.45 |
Mains driver | 100-240 V AC | 6-9 | 115 V or 230 V AC mains power | 300 mA |
1 | 130 mm x 27 mm x 18 mm | Output voltage 18-35 V. | |
JNY-LO912A, (9-12)x1W mains driver |
FastTech $5.35 |
Mains driver | 100-240 V AC | 9-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 130 mm x 27 mm x 18 mm | Output voltage 27-45 V. | |
Joule Thief |
bigclive.com $0.00 Make your own from scrap - fun! |
Boost driver | 0.3-1.5 V | 1 | Use with single alkaline only, not NiMH | 30-75% |
|
1 | depends on the components you find | For driving a single 5mm LED from an alkaline AA or AAA. Do not use with NiMH - the Joule Thief will suck it dry and leave it gasping or permanently dead. There's a handy instruction video on YouTube. Â Some changes to the basic circuit can increase efficiency and stablise output. (Love the ASCII diagrams - they're cool!) Â FWIW an open circuit Joule Thief can output over 50 volts, so they can be used for all sorts of things, like charging other batteries. |
JR (13-20)x1W, waterproof mains driver |
goodluckbuy.com $12.84 |
Mains driver | 85-265 V AC | 13-20 | 115 V or 230 V AC mains power | 320 mA |
1 | Product removed from retailer's site. Output voltage 35-65 V. IP66 dust/water rating. |
||
JR (21-30)x1W, waterproof mains driver |
goodluckbuy.com $15.27 |
Mains driver | 85-265 V AC | 21-30 | 115 V or 230 V AC mains power | 320 mA |
1 | Product removed from retailer's site. IP66 dust/water rating. |
||
JR(13-20)x1W, waterproof 20 W mains driver |
DealExtreme $11.10 |
Mains driver | 85-265 V AC | 13-20 | 115 V or 230 V AC mains | 320 mA |
1 | 140 mm x 30 mm x 18 mm | Output voltage 35-65 V. IP66 dust/water rating. | |
JR(2-3)x1W waterproof mains driver |
DealExtreme $4.20 |
Mains driver | 85-265 V AC | 2-3 | 115 V or 230 V AC mains | 320 mA |
1 | 51 mm x 25 mm x 20 mm | IP66 dust/water rating. | |
JR(2-3)x3W mains driver |
DealExtreme $5.05 |
Mains driver | 85-265 V AC | 2-3 | 115Â V, 230Â V AC mains power | 680 mA |
1 | 37 mm x 30 mm x 24 mm | Output voltage 6-11 V. If maximum output is 11 V at 680 mA it's actually about 7.5 W. | |
JR(21-30)x1W, waterproof mains driver |
DealExtreme $12.90 |
Mains driver | 85-265 V AC | 21-30 | 115 V or 230 V AC mains power | 320 mA |
1 | 160 mm x 30 mm x 20 mm | Output voltage 60-98 V. Note that this voltage represents a shock hazard - use with caution. IP66 dust/water rating. | |
JR(4-6)x1W mains driver |
DealExtreme $4.97 |
Mains driver | 85-265 V AC | 4-6 | 115 V or 230 V AC mains | 330 mA |
1 | 38 mm x 30 mm x 24 mm | Output voltage 12-21 V. Caution: Driver possibly not waterproof as claimed. | |
JR(4-7)x1W, mains driver |
DealExtreme $3.90 |
Mains driver | 85-265 V AC | 4-7 | 115 V or 230 V AC mains power | 320 mA |
1 | 53 mm x 29 mm x 23 mm | Output voltage 14-25 V. | |
JR(7-9)x1W mains driver |
DealExtreme $5.90 |
Mains driver | 85-265 V AC | 7-9 | 115 V or 230 V AC mains | 330 mA |
1 | 38 mm x 30 mm x 23 mm | Output voltage 21-32 V. Caution: Driver possibly not waterproof as claimed. | |
JR(9-12)x1W LED mains driver |
DealExtreme $5.20 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 320 mA |
1 | 67 mm x 33 mm x 24 mm | Output voltage 30-43 V. | |
JR(9-12)x3W, waterproof mains driver |
DealExtreme $13.44 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 670 mA |
1 | 170 mm x 30 mm x 20 mm | Output voltage 28-45 V. IP66 dust/water rating. | |
JR-100W-1003600, 100W water resistant mains driver |
DealExtreme $40.60 |
Mains driver | 85-265 V AC | 10 | 115 V or 230 V AC mains power | 90% | 3000 mA |
1 | 200 mm x 55 mm x 32 mm | Output voltage 30-36 V. IP67 dust/water rating. |
JR-10W |
DealExtreme $5.60 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 80% | 900 mA |
1 | 68 mm x 30 mm x 20 mm | Output voltage 6-12 V. IP67 dust/water rating. |
JR-10W |
DealExtreme $8.00 |
Mains driver | 85-265 V AC | 3
3 LEDs included |
115 V or 230 V AC mains power | 80% | 900 mA |
1 | 29 mm x 20 mm x 3 mm | Output voltage 6-12 V. Intended for 3s3p LED arrays. IP67 dust/water rating. The 3 mm dimension is supposedly the thickness of the LED board. Apparently includes 3s3p LED array. See DX sku.232232 for this driver without the LED array. |
JR-120W, 120W mains driver |
DealExtreme $40.00 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 3600 mA |
1 | 174 mm x 60 mm x 34 mm | Intended for 10 series LEDs x 12 parallel LEDs. Output voltage 30-36 V. | |
JR-18W-(16-24) |
DealExtreme $4.50 |
Mains bulb driver | 110-240 V AC | 16-24 | 115 V or 230 V AC mains power | 240 mA |
1 | 97 mm x 17 mm x 9 mm | Output voltage 48-75 V. Note that this voltage represents a shock hazard - use with caution. | |
JR-2003600, 200W mains driver |
DealExtreme $66.20 |
Mains driver | 85-265 V AC | 10-12 | 115 V or 230 V AC mains power | 93% | 6000 mA |
1 | 205 mm x 69 x 48 mm | Output voltage 30-36 V. IP67 dust/water rating. |
JR-200W, 200W mains driver |
DealExtreme $44.80 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 6000 mA |
1 | 174 mm x 60 mm x 34 mm | Intended for 10 series LEDs x 20 parallel LEDs. Output voltage 30-36 V. | |
JR-22-45/032, waterproof 12 W mains driver |
DealExtreme $6.72 (formerly $7.10) |
Mains driver | 85-265 V AC | 6-12 | 115 V or 230 V AC mains power | 320 mA |
1 | 78 mm x 30 mm x 20 mm | Output current claimed 320±20 mA at (apparently) 22-45 V. Claimed dust and water ingress protection rating IP66. | |
JR-30W-LED Driver, 2.0 A mains driver |
DealExtreme $10.70 |
Mains driver | 85-265 V AC | 5 | 115 V or 230 V AC mains power | 81% | 2000 mA |
1 | 95 mm x 40 mm x 23 mm | Driver has changed; the present driver name in this table is from the waterproof case on the previous version. Output voltage 16-18 V. Note that 2.0 A output at 18 V is 36 W, significantly greater than the 30 W claimed, so it's possible the claimed output is approximate. |
JR-3W, mains driver |
DealExtreme $2.20 |
Mains bulb driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 300 mA |
1 | 22 mm x 15 mm x 13 mm | Output voltage 3-10 V. | |
JR-50W, 1.5A, 50W mains driver |
DealExtreme $18.80 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 1500 mA |
1 | 110 mm x 60 mm x 30 mm | Output voltage 30-36 V. Overheating protection, over-voltage protection, lightning protection. | |
JR-50W, 50 W mains driver |
DealExtreme $15.90 |
Mains driver | 85-265 V AC | 7-8 | 115 V or 230 V AC mains | 2300 mA |
1 | 90 mm x 55 mm x 34 mm | Output voltage 22-26 V. Output current labelled as 2.4 A, claimed 2.3 A. | |
JR-DC-50W |
DealExtreme $13.91 |
Boost driver | 12-24 V | 8-11 | 12V automotive | 1500 mA |
1 | 70 mm x 50 mm x 20 mm | Output voltage 26-36 V. Includes driver heatsink. | |
JR-LED 5W |
DealExtreme $3.33 |
Boost driver and buck driver | 3.0-4.2 V | 1
1 LED included |
1x Li-ion | 900 mA |
1 | 20 mm | Unknown regulation method; the inductor implies boost and/or buck. One warm white LED included. |
|
JR-LED-10W, (3-4)x3W mains driver |
DealExtreme $2.50 |
Mains bulb driver | 85-277 V AC | 3-4 | 115Â V, 230Â V AC mains power | 700 mA |
1 | 32 mm x 17 mm x 17 mm | Output voltage 9-14 V. Intended for 3S3P LED arrays. | |
JR-LED-10W-COB, 10W mains driver (for 4S LED array) |
DealExtreme $5.11 |
Mains bulb driver | 85-277 V AC | 4
1 LED included |
115Â V, 230Â V AC mains power | 640 mA |
1 | 32 mm x 18 mm x 17 mm | Output voltage 12-14 V. Includes a warm white LED array. |
|
JR-LED-2736B, (9-12)x3W mains driver |
DealExtreme $12.99 |
Mains driver | 90-264 V AC | 9-12 | 115 V or 230 V AC mains power | 650 mA |
1 | 144 mm x 30 mm x 22 mm | Output voltage 30-43 V. IP67 dust/water rating. | |
JR-M16-2*2 |
DealExtreme $1.75 |
MR16 (buck) driver | 8.0-12 V DC; also works with AC | 1-3 | 12 V DC, 12 V AC | 600 mA Can be modified to 1000 mA |
1 | 28 mm x 17 mm x 11 mm | Driver chip probably MC34063A (which has a 1.5 A maximum and is specified for DC-DC converters, not constant current LED drivers), with SS14 Schottky diodes. Said to be suited for 2 series, 2 parallel LEDs; it can probably handle 1-3 LEDs just fine. | |
JR-M16-3*1W, MR16 driver |
DealExtreme $1.64 |
MR16 (buck) driver | 11-13 V DC; also works with AC | 3 | 12 V AC or DC | 300 mA Can be modified to 1000 mA |
1 | 29 mm x 18 mm x 10 mm | Output voltage 9-11 V. Driver chip MC34063A (which has a 1.5 A maximum and is specified for DC-DC converters, not constant current LED drivers). Driver comes with SS14 Schottky diodes. | |
JR-SS-35R-36, |
DealExtreme $17.79 |
Mains driver | 100-240 V AC | 6-12 | 115 V or 230 V AC mains power | 88% | 1050 mA |
1 | 105 mm x 4.5 mm x 3.1 mm | Output voltage 18-36 V. IP66 dust/water rating. |
JR-SS-50R-36, (8-11)x5W mains driver |
DealExtreme $21.40 |
Mains driver | 100-240 V AC | 7-11 | 115 V or 230 V AC mains power | 88% | 1500 mA |
1 | 95 mm x 70 mm x 33 mm | Output voltage 26-36 V. IP66 dust/water rating. |
JR10W mains driver |
DealExtreme $2.50 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 900 mA |
1 | 40 mm x 25 mm x 23 mm | Output voltage 9-11 V. | |
JR1x1W waterproof mains driver |
DealExtreme $4.20 |
Mains driver | 85-265 V AC | 1 | 115 V or 230 V AC mains | 330 mA |
1 | 51 mm x 25 mm x 20 mm | IP66 dust/water rating. | |
JR1x3W waterproof mains driver |
DealExtreme $4.10 |
Mains driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 680 mA |
1 | 50 mm x 25 mm x 20 mm | IP66 dust/water rating. | |
JRLED (1-3)x1W LED mains driver |
DealExtreme $7.60 for 10 |
Mains bulb driver | 100-240 V AC | 1-3 | 115Â V, 230Â V AC mains power | 290 mA |
1 | 24 mm x 15 mm x 15 mm | Output voltage 3-10 V. | |
JRLED (3-4)x1W dimmable mains driver |
DealExtreme $5.63 for 3 |
Mains driver | 220-240 V AC | 3-4 | 230Â V AC mains power | 80% | 300 mA |
1 | 360 mm x 28 mm x 20 mm | Output voltage 9-14 V. Dimmable. Listed size is apparently the length of the wire. |
JRLED 1W LED mains driver |
DealExtreme $8.98 for 3 |
Mains bulb driver | 100-240 V AC | 1 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 53 mm x 25 mm x 16 mm | The claimed output voltage is apparently a mistake, and should probably be 3-6 V. | |
JRLED 5x1W dimmable mains driver |
DealExtreme $5.75 for 3 |
Mains driver | 220-240 V AC | 5 | 230Â V AC mains power | 80% | 300 mA |
1 | 50 mm x 28 mm x 21 mm | Output voltage 15-18 V. Dimmable. |
JRLED LZ (4-5)x1W mains driver |
DealExtreme $7.45 for 5 |
Mains driver | 85-265 V AC | 4-5 | 115Â V, 230Â V AC mains power | 80% | 300 mA |
1 | 50 mm x 28 mm x 21 mm | Output voltage 12-17 V. |
JRLED TG110V, 5x1W dimmable mains driver |
DealExtreme $6.95 for 5 |
Mains bulb driver | 110-120 V AC | 5 | 115Â V AC mains power | 80% | 300 mA |
1 | 25 mm x 18 mm x 11 mm | Output voltage 15-17 V. Dimmable. |
JRLED-(3-5)x1W mains driver |
DealExtreme $5.91 for 5 |
Mains bulb driver | 110-240 V AC | 3-5 | 115 V or 230 V AC mains power | 300 mA |
1 | 24 mm x 16 mm x 13 mm | Output voltage 9-18 V. | |
JRLED-10W-B low voltage driver |
DealExtreme $4.32 |
Buck driver | 12-14 V DC; also works with AC | 3
1 LED included |
12 V AC or DC | 700 mA |
1 | 29 mm x 18 mm x 11 mm | Output voltage 9-11 V. One blue 3s3p LED array included. |
|
JRLED-10W-B mains driver |
DealExtreme $4.99 |
Mains bulb driver | 85-265 V AC | 3
1 LED included |
115 V or 230 V AC mains power | 700 mA |
1 | 32 mm x 18 mm x 17 mm | Output voltage 9-11 V. One blue 3s3p LED array included. |
|
JRLED-10W-B mains driver |
DealExtreme $4.99 |
Mains bulb driver | 85-277 V AC | 3
1 LED included |
115 V or 230 V AC mains power | 700 mA |
1 | 32 mm x 18 mm x 17 mm | Output voltage 10-11 V. One blue 3s3p LED array included. |
|
JRLED-10W-W low voltage driver |
DealExtreme $3.72 |
MR16 (buck) driver | 12-14 V DC; also works with AC | 3
1 LED included |
12 V AC or DC | 700 mA |
1 | 29 mm x 18 mm x 11 mm | Output voltage 9-11 V. One cool white 3s3p LED array included. |
|
JRLED-10W-W mains driver |
DealExtreme $4.50 |
Mains bulb driver | 86-265 V AC | 3
1 LED included |
115 V or 230 V AC mains power | 700 mA |
1 | 32 mm x 18 mm x 17 mm | Output voltage 9-11 V. The dimensions are a guess. One cool white 3s3p LED plate included. |
|
JRLED-10W-WW low voltage driver |
DealExtreme $3.72 |
Buck driver | 12-14 V DC; also works with AC | 3
1 LED included |
12 V AC or DC | 700 mA |
1 | 29 mm x 18 mm x 11 mm | Output voltage 9-11 V. One warm white 3s3p LED array included. |
|
JRLED-10W-WW mains voltage driver |
DealExtreme $4.52 |
Mains driver | 86-265 V AC | 3
1 LED included |
115Â V, 230Â V AC mains power | 700 mA |
1 | Output voltage 9-11 V. Driver size not stated. Includes a warm white LED array. |
||
JRLED-1825A, (18-25)x1W mains driver |
DealExtreme $7.99 |
Mains driver | 100-265 V AC | 18-25 | 115 V or 230 V AC mains power | 300 mA |
1 | 115 mm x 46 mm x 20 mm | Output voltage 68-90 V. Note that this voltage represents a shock hazard - use with caution. | |
JRLED-3*1W-SGK, sound and light sensitive LED driver |
DealExtreme $3.21 |
Mains bulb driver | 85-240 V AC | 3 | 115Â V, 230Â V AC mains power | 220 mA |
1 | 38 mm x 20 mm x 13 mm | Output voltage 9-11 V. Sound and light sensitive, stays on for 30 seconds. | |
JRLED-4-7*1W-SGK, sound and light sensitive LED driver |
DealExtreme $3.95 |
Mains bulb driver | 85-240 V AC | 4-7 | 115Â V, 230Â V AC mains power | 250 mA |
1 | 48 mm x 20 mm x 16 mm | Output voltage 12-23 V. Sound and light sensitive, stays on for 30 seconds. | |
JRLED-MR16-9W |
DealExtreme $4.66 for 5 |
MR16 (buck) driver | 12-14 V DC; also works with AC | 3 | 12 V DC | 625 mA Can be modified to 1000 mA |
1 | 29 mm x 18 mm x 12 mm | Output voltage 9-12 V. Driver chip MC34063A, which has a 1.5 A maximum (and is specified for DC-DC converters, not constant current LED drivers). Driver comes with SS14 Schottky diode. | |
JRLED-MR16-9W |
DealExtreme $6.17 for 10 |
MR16 (buck) driver | 12-17 V DC; also works with AC | 1 | 12 V AC, 12 V DC |
300 mA |
1 | 28 mm x 18 mm x 11 mm | Output voltage 3-4 V. Driver chip MC34063A, with SS14 Schottky diode. | |
JS-LED-C, RGB Bluetooth LED strip dimmer |
DealExtreme $27.14 |
User interface driver | 12-12 V | 1-6 | 12 V DC |
|
1 | 98 mm x 50 mm x 22 mm | Buyer beware - many details missing; assumed to work with 12 V. With Bluetooth control. | |
JZ-10W-YX-RGB, RGB module with remote control |
DealExtreme $9.20 |
User interface driver | 12-12 V DC; also works with AC | 3
3 LEDs included |
12 V AC or DC | 75% | 650 mA |
1 | 41 mm x 39 mm x 9 mm | Output voltage 7-9 V. Rectifier included on power supply/first stage driver. IR remote control. RGB LED array included. |
JZ-12W-(9-15) |
DealExtreme $4.30 |
Mains bulb driver | 110-240 V AC | 9-15 | 115Â V, 230Â V AC mains power | 240 mA |
1 | 97 mm x 16 mm x 10 mm | Output voltage 27-50 V. Intended for "daylight bulb". | |
JZ-3W-4, RGB LED controller |
DealExtreme $5.99 |
User interface driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 75% | 900 mA |
1 | 25 mm x 17 mm x 14 mm | 3 channel controller, maximum 300 mA per channel. IR remote control. 3 colour LED not included. |
K-003A6, 5 mode |
FastTech $2.28 |
Linear regulator | 3.0-3.7 V | 0 | 3x NiMH | 2200 mA |
5 | 17 mm | 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. Assumed to be a linear regulator. | |
Kabit KE-LED 1x1W mains driver |
DinoDirect $4.69 |
Mains driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 320 mA |
1 | 390 mm x 270 mm x 200 mm | Output voltage 3.0-3.3 V. Output current is a guess. I suspect the claimed dimensions should have been stated in mm not cm. | |
Kabit KE-LED 3x1W mains driver |
DinoDirect $3.99 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 320 mA |
1 | 610 mm x 240 mm x 200 mm | Output voltage 9.0-10.8 V. Output current is a guess. I suspect the claimed dimensions should have been stated in mm not cm. | |
Kabit KE-LED 5x1W mains driver |
DinoDirect $4.99 |
Mains driver | 85-265 V AC | 5 | 115 V or 230 V AC mains power | 320 mA |
1 | 710 mm x 250 mm x 200 mm | Output voltage 15.0-17.5 V. Output current is a guess. I suspect the claimed dimensions should have been stated in mm not cm. | |
Kabit KE-LED 7x1W mains driver |
DinoDirect $5.39 |
Mains driver | 85-265 V AC | 7 | 115 V or 230 V AC mains power | 320 mA |
1 | 81 mm 25 mm x 20 mm | Output voltage 21.0-25.2 V. Output current is a guess. | |
KED 03-350C, 2-3x1W mains driver |
KaiDomain $5.74 |
Mains driver | 100-240 V AC | 2-4 | 115 V or 230 V AC mains power | 350 mA |
1 | 58 mm x 32 mm x 21 mm | A reference to it being waterproof is unsupported with an IP rating. Size assumed to be same as KD S009712 (which no longer lists its dimensions). | |
KED01-350C, waterproof 1 W LED driver |
DealExtreme $4.60 |
Mains driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 350 mA |
1 | 36 mm x 26 mm x 19 mm | Maximum 4 V output. | |
KED02-700C |
KaiDomain $4.44 |
Mains driver | 100-240 V AC | 1 | 115 V or 230 V AC mains power | 700 mA |
1 | 58 mm x 32 mm x 21 mm | Output voltage maximum 4 V. Formerly product ID 10963. |
|
KED02-700C |
DealExtreme $3.40 |
Mains driver | 100-240 V AC | 1 | 115 V or 230 V AC mains power | 700 mA |
1 | 37 mm x 26 mm x 21 mm | Output voltage maximum 4 V. | |
KED02-700C, 1x3W mains driver |
DealExtreme $3.99 |
Mains driver | 100-240 V AC | 1 | 115 V or 230 V AC mains power | 700 mA |
1 | 53 mm x 28 mm x 23 mm | Output voltage up to 4 V. Said to be water resistant but no IP code is stated. | |
KED03-350C |
DealExtreme $32.16 |
Mains driver | 100-240 V AC | 2-3
2 LEDs included |
115 V or 230 V AC mains power | 350 mA |
1 | 55 mm x 27 mm x 20 mm | Maximum 12 V output. 3 white LEDs included (in a fancy aluminium holder). |
|
KED03-350C mains driver (KEGAO 3x 1 W) |
DealExtreme $6.56 |
Mains driver | 100-240 V AC | 2-3 | 115Â V or 230Â V AC mains power | 350 mA |
1 | 55 mm x 27Â mm x 20Â mm | Whatever description there used to be has vanished. Enclosed in white box - claimed water and dust resistant. Presumed to be a transformer with buck regulator. Output 350 mA (title says 320 mA) constant current @ 6-12 V according to the label (not 0.5-10 V as claimed in title). | |
Kennan (Nanjg 07) |
KaiDomain $3.10 |
Buck driver | 5.0-18 V | 1-3 | 79-91% | 750 mA |
1 | 17 mm | Buck regulator based on PT4105 chip. Constant current output. Off the shelf it's set to 750 mA, but this can be changed by using a different set resistor (original is soldered surface mount). Input voltage needs to be 1-3 V above output. Can output 1 A with more than 9 V in, but at an efficiency cost. | |
Kennan 2 variants (Nanjg 21) |
KaiDomain $3.43 |
Buck driver | 5.0-18 V | 1-3 | 60% | 1000 mA |
1 | 20 mm | Buck regulator based on PT4105 chip. Constant current output. Off the shelf it's set to 1000 mA (even though that's out of spec for the regulator chip below 9 V in) but this can be changed by using a different set resistor (original is soldered surface mount). Input voltage needs to be 1-3 V above output, but the new components will shut the board down under 6.2V (2x Li-ion?). This thread discusses the control features of this new version. Efficiency perhaps as low as 60% thanks to running it out of spec and it also runs quite hot because of it. In summary, more versatile but not as useful. | |
Kennan 3 |
KaiDomain $4.25 |
Buck driver | 4.0-18 V | 1-3 | 4+ NiMH, 1+ Li-ion, 12 V car battery, whatever |
80-92% | 1000 mA |
1 | 17 mm | November 2011: The present Kennan may be version 4; input voltage range previously claimed to be 3.6-23 V, now 4-18 V. It's still a good driver but it's more expensive than it needs to be, so no longer recommended. Consider KD sku S009736 or DX sku.26110 instead. Buck regulator based on AX2002 chip. Constant current output, off the shelf set to 1 amp. Efficiency figures from AX2002 datasheet, but "AX2002" test results I've seen that may be of this board indicates 78-87% for a single LED below 1.4 A, sagging to 65% at 2.4 A. Note: In italianboy's review (apparently lost with the Nov 2011 KD site update) he claims that 1 amp is outside the driver chip's limits. This is not true as the AX2002 can actually cope with 2.5 amps, although it will get very hot over 2 amps, meaning without heatsinking the thermal protection will probably turn it off after just a few minutes. Also, the other components on the Kennan 3 board may not be too happy at 2+ amps; the Schottky diode is an SS14, which has a 1 A limit. The Case 1 and Case 2 examples mentioned on KD's site mention the 750 mA that an earlier Kennan driver was set to. Formerly product ID 1640. |
L-2030W-A yellow case, (20-30)x1W mains driver |
FastTech $12.63 |
Mains driver | 85-265 V AC | 20-30 | 115Â V, 230Â V AC mains power | 320 mA |
1 | 143 mm x 29 mm x 22 mm | Output voltage 60-100 V. Note that this voltage represents a shock hazard - use with caution. | |
L-mini II |
Shining Beam $10.75 + shipping |
Boost driver and buck driver | 2.8-5.5 V | 1 | 1x Li-ion | 1000 mA |
3 | 17 mm - two boards in double layer | Stupidly, this driver completely vanishes from the retailer's web site when temporarily out of stock. SKU 1219. Three mode, low (80 mA), medium (350 mA), high (1000 mA). Built-in voltage protection, will turn off at 2.8 V. Polarity protection. |
|
L0812W, (8-12)x1W mains driver |
Tmart $7.80 |
Mains driver | 85-265 V AC | 8-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 80 mm x 30 mm x 20 mm | Output voltage 22-43 V. | |
L103W, 1x3W mains driver |
Tmart $4.36 |
Mains driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 600 mA |
1 | 59 mm x 25 mm x 20 mm | Output voltage 3-5 V. | |
L30.3 |
Lux-RC $26.66 + shipping |
Buck driver | 3.8-12 V | 1
1 LED included |
69-82% | 1000 mA |
1 | 18 mm | Driver board with combined LED - Seoul P4 U2 (cool white). Board has 12 V maximum on it, but spec sheet shows 18 V maximum. Â Seems identical to L30.4 except for an extra hole on the L30.4. |
|
L30.4 |
Lux-RC $26.66 + shipping |
Buck driver | 3.8-18 V | 1
1 LED included |
69-82% | 1000 mA |
1 | 18 mm | Driver board with combined LED - Seoul P4 U2 (cool white). Board has 12 V maximum on it, but spec sheet shows 18 V maximum. Â Seems identical to L30.3 except for an extra hole on the L30.4. |
|
L31.2 |
Lux-RC $33.09 + shipping |
Buck driver | 3.5-18 V | 1
1 LED included |
66-77% | 1000 mA |
1 | 15 mm | Driver board with combined LED Cree XP-G R5 (cool white). | |
L31.2E |
Lux-RC $33.09 + shipping |
Buck driver | 3.5-18 V | 1
1 LED included |
69-82% | 1000 mA |
1 | 15 mm | Driver board with combined LED Cree XP-E R3 (outdoor white) for a narrower beam than the standard L312. | |
L31.2N |
Lux-RC $33.09 + shipping |
Buck driver | 3.5-18 V | 1
1 LED included |
66-77% | 1000 mA |
1 | 15 mm | Driver board with combined LED Cree XP-G R4 (neutral white). | |
L33.2 |
Lux-RC $46.78 + shipping |
Boost driver | 4.8-9.5 V | 3
3 LEDs included |
2x Li-ion | 78-96% | 1060 mA |
1 | 20 mm | Driver board with combined LEDs - triple Cree XP-G R5 (cool white). A new 1.55 A version is undergoing testing, as discussed here. |
L33.2-MC-Z |
Lux-RC $72.90 + shipping |
Boost driver | 5.5-9.5 V | 3
3 LEDs included |
2x Li-ion | 1550 mA |
7 | 20 mm | Beta version - even the name hasn't been standardised yet (MC-Z or Z-MC). Driver board with combined LEDs - triple Cree XP-G R5 (cool white). | |
L33.2-Z |
Lux-RC $67.00 + shipping |
Boost driver | 5.5-9.5 V | 3
3 LEDs included |
2x Li-ion | 1550 mA |
1 | 20 mm | Beta version. Driver board with combined LEDs - triple Cree XP-G R5 (cool white). | |
L33.2E |
Lux-RC $46.78 + shipping |
Boost driver | 4.8-9.5 V | 3
3 LEDs included |
2x Li-ion | 78-96% | 1060 mA |
1 | 20 mm | Driver board with combined LEDs - triple Cree XP-E R3 (cool white). |
L33.2MC |
Lux-RC $52.90 + shipping |
Boost driver | 3.5-9.5 V | 3
3 LEDs included |
2x Li-ion | 78-96% | 1060 mA |
7 | 20 mm | Driver board with combined LEDs - triple Cree XP-G R5 (cool white). Three modes; 100%, 20%, 2%. An extra momentary button (not supplied) allows access to four flashing modes and to manually set the middle mode anywhere in the range 0-50%. Below ~4.8 V in the output will drop out of regulation. A new 1.55 A version is undergoing testing, as discussed here. |
L33.2MC-E |
Lux-RC $52.90 + shipping |
Boost driver | 4.8-9.5 V | 3
3 LEDs included |
2x Li-ion | 78-96% | 1060 mA |
7 | 20 mm | Driver board with combined LEDs - triple Cree XP-E R3 (cool white). Three modes; 100%, 20%, 2%. An extra momentary button (not supplied) allows access to four flashing modes and to manually set the middle mode anywhere in the range 0-50%. A new 1.55 A version is undergoing testing, as discussed here. |
L33.2MC-N |
Lux-RC $52.90 + shipping |
Boost driver | 3.5-9.5 V | 3
3 LEDs included |
2x Li-ion | 78-96% | 1060 mA |
7 | 20 mm | Driver board with combined LEDs - triple Cree XP-G R4 (neutral white). Three modes; 100%, 20%, 2%. An extra momentary button (not supplied) allows access to four flashing modes and to manually set the middle mode anywhere in the range 0-50%. Below ~4.8 V in the output will drop out of regulation. A new 1.55 A version is undergoing testing, as discussed here. |
L33.2MC-N-Z |
Lux-RC $72.90 + shipping |
Boost driver | 5.5-9.5 V | 3
3 LEDs included |
2x Li-ion | 1550 mA |
7 | 20 mm | Beta version - even the name hasn't been standardised yet (MC-N-Z or ZMC-N). Driver board with combined LEDs - triple Cree XP-G R4 (neutral white). | |
L33.2MC-RGB |
Lux-RC $49.70 + shipping |
Boost driver | 4.0-9.0 V | 3
3 LEDs included |
2x Li-ion | 1000 mA |
7 | 20 mm | Beta version. Driver board with combined LEDs - triple Cree XP-E (red, green and blue). | |
L33.2N |
Lux-RC $46.78 + shipping |
Boost driver | 4.8-9.5 V | 3
3 LEDs included |
2x Li-ion | 78-96% | 1060 mA |
1 | 20 mm | Driver board with combined LEDs - triple Cree XP-G R4 (neutral white). |
L33.2N-Z |
Lux-RC $67.00 + shipping |
Boost driver | 5.5-9.5 V | 3
3 LEDs included |
2x Li-ion | 1550 mA |
1 | 20 mm | Beta version - even the name hasn't been standardised yet (N-Z or Z-N). Driver board with combined LEDs - triple Cree XP-G R4 (neutral white). | |
L407W, (4-7)x1W mains driver |
Tmart $4.53 |
Mains driver | 85-265 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 69 mm x 25 mm x 20 mm | Output voltage 12-24 V. | |
LB0724 blue |
DealExtreme $21.80 |
Mains driver | 85-240 V AC | 4-7
5 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | Output voltage 12-24 V. 5 white LEDs included (in a downlight). |
||
LC-10407A, red case |
DealExtreme $13.50 |
Mains driver | 100-240 V AC | 4-7
7 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 12-25 V. 7 warm white LEDs included (in an aluminium downlight). |
||
LC-10407A, red case |
DealExtreme $17.70 |
Mains driver | 100-240 V AC | 4-7
6 LEDs included |
115 V or 230 V AC mains power | 330 mA |
1 | Output voltage 12-25 V. DX claims input voltage range 85-245 V; figures from label listed in table. 6 white LEDs included (in an aluminium downlight). Also available with 5 LEDs and 7 LEDs. |
||
LD-18650-3F, (4-5)x2W main driver |
DealExtreme $6.83 |
Mains driver | 90-260 V AC | 4-5 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 88 mm x 39 mm x 22 mm | Output voltage 10-18 V. | |
LD-21 |
Intl Outdoor Store $8.50 |
Buck driver | 3.3-10.0 V | 1 | 1-2x Li-ion 2-3x CR123A |
1000 mA |
5 | 17 mm x 8 mm high - components on both sides | Driver removed from site. 5 modes with memory; high (1 A), medium (300 mA), low (50 mA), strobe, SOS. Modes use PWM. Low voltage warning; light will slowly flash at 3.3 V (which seems very conservative) and 6.2 V. |
|
LD-25, 2.0A |
Intl Outdoor Store $8.50 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion | 2000 mA |
5 | 17 mm x 7 mm high - two boards in double layer | SKU number reused for a very different product. Unknown drive method - no inductor so presumed to be a linear regulator. 5 modes with memory (claims to not use PWM); high (2.0 A), medium (1 A), low (150 mA), strobe, SOS. Change mode group to 3 mode (high, medium, low) by blinking it off at the right moment. Low voltage protection - under 3 V drops to low mode and starts flashing. No polarity protection. A higher output version is Intl Outdoor p-414. |
|
LD-25, 2.6A |
Intl Outdoor Store $8.50 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion | 2600 mA |
5 | 17 mm x 7 mm high - two boards in double layer | Driver removed from site. Unknown drive method - no inductor so presumed to be a linear regulator. 5 modes with memory (claims to not use PWM); high (2.6 A), medium (1 A), low (150 mA), strobe, SOS. Change mode group to 3 mode (high, medium, low) by blinking it off at the right moment. Low voltage protection - under 3 V drops to low mode and starts flashing. No polarity protection. A lower output version is Intl Outdoor p-415. |
|
LD-26, 2.6A PWM driver |
FastTech $4.63 |
User interface driver | 3.0-4.2 V | 1 | 1x Li-ion | 2600 mA |
5 | 17 mm | Direct drive. 5 modes in two groups, high (100%), medium (40%), low (6%), strobe, SOS. Alternate group without flashing modes accessed by half press. Low voltage warning. | |
LD-29, 2.8A |
Intl Outdoor Store $8.95 |
Buck driver | 3.0-8.4 V | 1 | 1-2x Li-ion | 2800 mA |
5 | 19 mm x 9 mm high - two boards in double layer | Driver removed from site. 5 modes with memory (claims to not use PWM); high (2.5 A one cell, 2.8 A two cells), medium (700 mA), low (100 mA), strobe, SOS. Constant current output with two cells. Low voltage protection, at 3 V/5.8 V; drops to low mode and starts flashing. |
|
LD-2C 3A |
Intl Outdoor Store $8.95 |
Unspecified driver type | 3.0-8.2 V | 1 | 1-2x Li-ion | 3000 mA |
3 | 21 mm x 7 mm high - two boards in double layer | 3 modes with memory in 3 groups, change group with half push; high (3 A), medium (900 mA), low (150 mA). Alternate groups with 2 modes or 1 mode. Driver board 18 mm diameter. Low voltage warning, polarity protection. | |
LD-30 |
CN Quality Goods $13.50 + shipping |
Boost driver | 0.8-3.0 V | 1 | 1-2x AA | 900 mA |
5 | 17 mm x 8 mm high | 5 mode; high (700 mA with 1x AA, 900 mA with 2x AA), medium, low, strobe, SOS. Low voltage warning at 0.8 V and 1.8 V. Polarity protection. Also available (for much less) from Intl Outdoor Store p-417. | |
LD-30 Boost |
Intl Outdoor Store $8.99 |
Boost driver | 0.9-3.0 V | 1 | 1-2x AA | 900 mA |
4 | 18 mm x 8 mm high - components on both sides | Driver removed from site. 4 modes; high (650 mA with one AA, 900 mA with two AAs), medium (100 mA), low (10 mA), strobe. Low voltage protection; drops to low mode and starts flashing. Polarity protection. |
|
LD-33 |
CN Quality Goods $9.90 + shipping |
Buck driver | 9-17 V | 3 | 3-4x Li-ion | 2500 mA |
5 | 24 mm x 15 mm high - components on both sides | 5 modes with memory; high, medium (700 mA), low (100 mA), strobe, SOS. Change to alternate group with no flashing modes with momentary switch push at the right time. Low voltage warning at 9 V and 12 V. Also available from Intl Outdoor Store p-489. | |
LD-33 |
Intl Outdoor Store $9.50 |
Buck driver | 9-17 V | 3 | 3-4x Li-ion | 2500 mA |
5 | 24 mm x 15 mm high - components on both sides | Driver removed from site. 5 modes with memory; high (2.5-2.6 A), medium (700 mA), low (100 mA), strobe, SOS. Two mode groups, featuring a group without flashing modes. Does not use PWM. Low voltage warning; light will slowly flash at 9 V and 12 V. |
|
LD-4B 2.4A Buck Driver |
Intl Outdoor Store $4.86 |
Buck driver | 3.0-16 V | 1-2 | 1-3x Li-ion | 2400 mA |
3 | 17 mm x 10 mm high | 1 mode and 3 mode versions; high, medium (750 mA), low (50 mA). Always starts in high (great shame). Output voltage up to 6.6 V. Polarity protection. For some reason is described as suitable for 2x XP-G2 in series (rated at 1500 mA) / 2x XP-E2 in series (rated at 1000 mA). The response from the shop is that those LEDs can be run that hard and modders completely ignore maximum ratings now. An XP-E2 at 2.4 A? Why? He's taken leave of his senses. Buyer beware. | |
LD-5650-3H, 1x3W mains driver |
DealExtreme $4.72 |
Mains bulb driver | 90-260 V AC | 1 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 52 mm x 26 mm x 18 mm | Output voltage 2-5 V. IP66 dust/water rating. | |
LD-CU7021AF |
DealExtreme $51.90 (formerly $55.71) |
Mains driver | 100-240 V AC | 1-6
3 LEDs included |
115Â V, 230Â V AC mains power | 700 mA |
1 | Product removed from retailer's site. Output voltage 3-21 V. 3 white LEDs included (in a fancy aluminium holder). |
||
LD-LPS-100W15A3036V |
LCK-LED $45.00 + shipping |
Mains driver | 170-250 V AC | 8-10 | 230 V AC mains power | 1500 mA |
1 | 130 mm x 70 mm x 45 mm | Output voltage 30-36 V. IP67 dust/water rating. Short circuit, overload, over voltage and over temperature protection. | |
LD-LPS-100W35A3036V |
LCK-LED $68.00 + shipping |
Mains driver | 170-250 V AC | 8-10 | 230 V AC mains power | 3500 mA |
1 | 210 mm x 70 mm x 45 mm | Output voltage 30-36 V. IP67 dust/water rating. Short circuit, overload, over voltage and over temperature protection. | |
LD10W |
LCK-LED $4.45 + shipping |
Buck driver | 12-14 V DC; also works with AC (12 V AC maximum) |
1-3 | 90-95% | 1000 mA |
1 | 43 mm x 23 mm x 9 mm | "Designed for 10W High Power LED" doesn't quite say how many LEDs it's for, so the 1-3 in this table is only a guess. The specifications for this driver are suspiciously similar to a mains driver from the same retailer. Buyer beware. | |
LD10W-C |
LCK-LED $5.45 + shipping |
Mains driver | 85-256 V AC | 1-3 | 115 V or 230 V AC mains power | 90-95% | 1000 mA |
1 | 43 mm x 23 mm x 9 mm | "Designed for 10W High Power LED" doesn't quite say how many LEDs it's for, so the 1-3 in this table is only a guess. The specifications for this driver are suspiciously similar to a 12 V driver from the same retailer. Buyer beware. |
LD42300-1F (8-12)x1W mains driver |
DealExtreme $6.85 |
Mains driver | 90-260 V AC | 8-12 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 88 mm x 39 mm x 22 mm | Output voltage 20-42 V. | |
LDCH LD-25 |
FastTech $4.40 |
Linear regulator | 3.0-4.2 V | 1 | 1x Li-ion | 3000 mA |
3 | 17 mm (plus a little) | 3 modes with memory, in Sensible Ascending Order, with the off-the-shelf current setpoints varying a bit; low (80mA), medium (somewhere in the range 700-1100mA), high (2200-3000mA). Double click for a hidden 12Hz strobe mode. Each steady mode is programmable. This driver gets some good reviews. It uses an AON7520 MOSFET |
|
LDV9 |
LCK-LED $9.45 + shipping |
Buck driver | 5.5-15 V (preferred less than 12 V) |
1 | 90-95% | 2800 mA |
3 | 19 mm | Three modes - low (5%), high (100%), medium (35%). Switches to low mode on over-temperature. Output claimed to be constant current and either 3.0 amps or 2.8 amps. Input variously listed at 5.5-15 V (with <12 V preferred), 5.5-13.2 V, and 4.0-12.0 V. 90-95% efficient seems to be the default claim by this retailer. The claim to provide 1+ hours of 3 A output from four Eneloop cells is clearly false for a Cree MC-E or SSC P7. With a LED Vf of 3.4 V (MC-E) that's 10.2+ Wh output from less than 8.5 Wh input (Eneloop @ 2.25 A, assumed driver 95% efficient for estimating battery voltage under load). This also raises doubt about the constant current claim. Buyer beware. | |
LE-LL208 |
Sure Electronics $1.99 |
Buck driver | 5.0-24 V (7-15 V suggested) |
1-4 | 73% | 285 mA |
1 | 24 mm x 24 mm | Driver has been removed from retailer's web site. Actual output current may vary from 240 mA to 310 mA. Possibly a clearance product; claim to have free shipping could not be verified. | |
LE-LL209 |
Sure Electronics $3.99 |
Buck driver | 6.0-15 V | 1-4 | 78% | 700 mA |
1 | 24 mm x 24 mm | Driver has been removed from retailer's web site. Actual output current may vary from 650 mA to 710 mA. | |
LE-LL310 |
Sure Electronics $2.99 + shipping |
Buck driver | 9-35 V | 1-8 | 96% | 350 mA |
1 | 25 mm x 25 mm | "1 W LED Driver Based on MBI6651". Although claimed to be "constant current" the output current drops the more LEDs it's driving and rises the higher the input voltage. Claimed efficiency @ 12 V input with 3 LEDs. | |
LE-LL311 |
Sure Electronics $4.99 + shipping |
Buck driver | 9-35 V | 1-8 | 96% | 700 mA |
1 | 25 mm x 25 mm | "3 W LED Driver Based on MBI6651". Although claimed to be "constant current" the output current drops the more LEDs it's driving and rises the higher the input voltage. Claimed efficiency @ 12 V input with 3 LEDs. | |
LE-LL312 |
Sure Electronics $6.99 + shipping |
Buck driver | 9-35 V | 1-6 | 96% | 1020 mA |
1 | 25 mm x 25 mm | "5 W LED Driver Based on MBI6651". Although claimed to be "constant current" the output current drops the more LEDs it's driving and rises the higher the input voltage. Claimed efficiency @ 12 V input with 3 LEDs. | |
LE-LL313 |
Sure Electronics $7.99 + shipping |
Buck driver | 9-35 V | 1-3 | 96% | 1500 mA |
1 | 25 mm x 25 mm | Driver has been removed from retailer's web site. Although "constant current" the output current drops the more LEDs it's driving and rises the higher the input voltage. Claimed efficiency @ 12 V input with 3 LEDs. | |
LE-LL315 |
Sure Electronics $1.99 + shipping |
Buck driver | 9-35 V | 1-7 | 96% | 150 mA |
1 | 25 mm x 25 mm | "0.5 W LED Driver Based on MBI6651". Although claimed to be "constant current" the output current drops the more LEDs it's driving and rises the higher the input voltage. Claimed efficiency @ 12 V input with 3 LEDs. | |
LED AC DC Dimmer |
Best Hong Kong $6.49 + shipping |
Linear regulator | 5.0-24 V DC; also works with AC (5-16 V AC) |
1-7 | 700 mA |
1 | 54 mm x 26 mm | Apparently a voltage-controlled driver with the output voltage set using a potentiometer; output voltage 1.5-22 V (use that potentiometer with care). There's an implication this driver should be used with a resistor in series with the LEDs. Claimed "max 700 mA, peak 2 A" is contradictory. Built-in rectifier for AC or DC operation. Unknown operation method but thought to be a linear regulator because of the presence of a large heat sink on the board. | ||
LED dimmer |
DealExtreme $7.80 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 12 A |
6 | 86 mm x 40 mm x 7 mm | Maximum switched current 12 A (originally with the probably bogus qualifier of 15% duty cycle). RF remote control. | |
LED mains bulb dimmer |
DealExtreme $9.10 |
User interface driver | 220-240 V AC | N/A | 230 V AC mains power |
|
1 | 88 mm x 86 mm x 46 mm | Intended for dimming mains powered LED bulbs, maximum bulb power 100 W. | |
Led Senser v2 |
PCB Components $44.00 (approx) |
Boost driver | 2.6-18 V | 1-10 | 92% | 1330 mA |
1 | 32 mm | Input current up to 3 A. Soft start output, current adjustable with solder bridge (350 mA, 700 mA, 1000 mA) up to 35 V. External PWM input. Claimed efficiency is maximum; typical efficiency unknown. | |
LED Senser Xtreme |
PCB Components $48.00 (approx) |
Boost driver | 6.0-30 V | 3-16 | 97% | 2050 mA Can be modified to 3000 mA |
1 | 28 mm x 16 mm high | Output current set by solder jumpers in 15 steps from 200 mA to 2050 mA. Tested up to 3 A output. Soft start function. Maximum input current 7 A. Maximum output voltage ~55 V. Maximum output power >100 W. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. Thermal protection. External PWM input and external shut down. | |
LED Slave |
PCB Components $16.50 (approx) |
Buck driver | 6.0-30 V | 1-6 | 95% | 1000 mA |
1 | 25 mm x 18 mm x 5 mm | 1 V overhead. Efficiency listed is maximum; typical efficiency unknown. Reverse polarity protection, soft start. | |
LED Slave with dimmer |
PCB Components $29.00 (approx) |
Buck driver | 6.0-30 V | 1-6 | 96% | 1000 mA |
1 | 29 mm x 17 mm x 5 mm | 1 V overhead. Dimming by PWM with an onboard RISC chip(!) or with DC input signal. Efficiency listed is maximum; typical efficiency unknown. Reverse polarity protection. | |
LED strip controller |
DealExtreme $2.59 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 41 mm x 12 mm x 8 mm | Single channel, maximum 6 A. | |
LED strip controller |
DealExtreme $14.89 |
User interface driver | 5.0-24 V | 1-6 | 5 V or 12 V or 24 V DC |
|
1 | 98 mm x 63 mm x 24 mm | IC control quantity: 512 pcs. Controlled IC models: LPD6803, LPD1109, LPD1882, LPD1886, P9813, SM16716, TM1803, TM1903, TM1829, WS2811, WS2801. | |
LED strip PIR switch |
DealExtreme $10.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 89 mm x 60 mm x 45 mm | 1 channel, switched by PIR (passive infrared) sensor. Does not seem to have any adjustment of PIR sensitivity, background light sensitivity or 'on' duration. | |
LED strip PIR switch |
DealExtreme $4.92 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 2000 mA |
1 | 20 mm | Maximum switching 30 W, 2 A. Switching by PIR (passive infrared). Does not seem to have any adjustment of PIR sensitivity, background light sensitivity or 'on' duration. | |
LED strip PIR switch |
DealExtreme $9.97 |
User interface driver | 12-12 V | 1-3 | 12 V DC |
|
1 | Details a bit lacking. | ||
Led Stripe v3 - Universal PWM dimming |
PCB Components $55.00 (approx) |
User interface driver | 4.0-26 V | 0 | 3500 mA |
1 | 30 mm x 26 mm | Up to 70 W power switching. Quite a fancy PWM controller (apparently), with RS-232 control, or with potentiometer or two buttons (0-100% stepless), or with a single button (three levels 25%, 50%, 100%, long press turns off). | ||
LED-20W (7-10x3W) mains driver |
DealExtreme $8.99 |
Mains driver | 90-264 V AC | 0 | 115 V or 230 V AC mains power | 88% | 650 mA |
1 | 105 mm x 30 mm x 23 mm | Output voltage 20-36 V. IP67 dust/water rating. |
LED-20W, (7-10)x3W mains driver |
DealExtreme $9.36 |
Mains driver | 90-264 V AC | 7-10 | 115 V or 230 V AC mains power | 650 mA |
1 | 101 mm x 29 mm x 22 mm | Output voltage 20-36 V. IP67 dust/water rating. | |
LED-2536W-A, (25-36)x1W mains driver |
Tmart $13.69 |
Mains driver | 85-265 V AC | 25-36 | 115 V or 230 V AC mains power | 300 mA |
1 | 120 mm x 37 mm x 28 mm | Output voltage 85-128 V. Note that this voltage represents a shock hazard - use with caution. | |
LED-30W, (10x3)x1W mains driver |
DealExtreme $13.73 |
Mains driver | 90-264 V AC | 8-12 | 115 V or 230 V AC mains power | 88% | 900 mA |
1 | 115 mm x 40 mm x 27 mm | Output voltage 24-36 V. IP67 dust/water rating. |
LED-30W, main driver |
DealExtreme $12.98 |
Mains driver | 90-264 V AC | 10 | 115 V or 230 V AC mains power | 900 mA |
1 | 112 mm x 37 mm x 28 mm | Output voltage 24-36 V. Intended for 10s3p LED arrays. IP67 dust/water rating. | |
LED-L0103W, (1-3)*1W waterproof mains driver |
Focalprice $3.93 |
Mains driver | 85-265 V AC | 1-4 | 115 V or 230 V AC mains power | 91% | 320 mA |
1 | 76 mm x 28 mm x 22 mm | Output voltage 2.5-12.0 V. IP67 dust/water rating. |
LED-L0203A, 3W mains driver |
DealExtreme $3.70 |
Mains driver | 90-264 V AC | 2-3 | 115 V or 230 V AC mains power | 300 mA |
1 | 61 mm x 30 mm x 20 mm | Output voltage 8-12 V, which does not line up with the claimed 2-3 LEDs. IP67 dust/water rating. | |
LED-L0407A, (4-7)x1W mains driver |
DealExtreme $4.90 |
Mains driver | 90-264 V AC | 4-7 | 115 V or 230 V AC mains power | 87% | 300 mA |
1 | 66 mm x 30 mm x 23 mm | Output voltage 15-24 V (that claimed minimum voltage is a little high for 4 LEDs). IP67 dust/water rating. |
LED-L04080W-A, (4-8)*1W waterproof mains driver |
Focalprice $6.39 |
Mains driver | 85-265 V AC | 4-9 | 115 V or 230 V AC mains power | 91% | 320 mA |
1 | 82 mm x 28 mm x 22 mm | Output voltage 12-27 V. IP67 dust/water rating. |
LED-L04080W-A, (4-8)x1W mains driver |
Tmart $5.45 |
Mains driver | 85-265 V AC | 4-8 | 115 V or 230 V AC mains power | 300 mA |
1 | 80 mm x 29 mm x 22 mm | Output voltage 12-27 V. | |
LED-L04080W-A, brown case |
DealExtreme $6.00 |
Mains driver | 85-265 V AC | 4-8 | 115 V or 230 V AC mains power | 90% | 320 mA |
1 | 60 mm x 28 mm x 22 mm | Output voltage 12-27 V. Claimed minimum efficiency listed here. Claimed waterproof (no IP rating given). |
LED-L0912A, (9-12)x1W mains driver |
DealExtreme $6.80 |
Mains driver | 90-264 V AC | 9-12 | 115 V or 230 V AC mains power | 88% | 300 mA |
1 | 92 mm x 30 mm x 23 mm | Output voltage 30-43 V. IP67 dust/water rating. |
LED-L0912W-A, (9-12)*1W waterproof mains driver |
Focalprice $7.23 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 91% | 320 mA |
1 | 92 mm x 28 mm x 22 mm | Output voltage 24-45 V. IP67 dust/water rating. |
LED-L0912W-A, brown case |
DealExtreme $7.20 |
Mains driver | 85-265 V AC | 9-12 | 115 V or 230 V AC mains power | 90% | 320 mA |
1 | 75 mm x 28 mm x 22 mm | Claimed output voltage 24-45 V, which implies 8-15 LEDs could be powered rather than the 9-12 LEDs claimed. Claimed minimum efficiency listed here. Claimed waterproof (no IP rating given). |
LED-L0915B, (3-5)*3W waterproof mains driver |
Focalprice $6.90 |
Mains driver | 85-265 V AC | 3-5 | 115 V or 230 V AC mains power | 91% | 650 mA |
1 | 82 mm x 28 mm x 22 mm | Output voltage 9-18 V. IP67 dust/water rating. |
LED-L0916B yellow case, (3-5)x3W mains driver |
FastTech $5.09 |
Mains driver | 85-265 V AC | 3-5 | 115 V or 230 V AC mains power | 650 mA |
1 | 80 mm x 29 mm x 22 mm | Output voltage 9-18 V. The only reviewer says his two delivered only 560 mA. | |
LED-L0916W-A, (9-16)*1W waterproof mains driver |
Focalprice $8.41 |
Mains driver | 85-265 V AC | 9-16 | 115 V or 230 V AC mains power | 91% | 320 mA |
1 | 90 mm x 28 mm x 22 mm | Output voltage 25-62 V. Note that this voltage represents a shock hazard - use with caution. IP67 dust/water rating. |
LED-L0916W-A, brown case |
DealExtreme $7.60 |
Mains driver | 85-265 V AC | 9-16 | 115 V or 230 V AC mains power | 90% | 320 mA |
1 | 75 mm x 28 mm x 22 mm | Output voltage 25-62 V, which implies 8-20 LEDs could be powered rather than the 9-16 LEDs claimed. Claimed minimum efficiency listed here. Claimed waterproof (no IP rating given). |
LED-L10W |
DealExtreme $5.90 |
Mains driver | 90-264 V AC | 3 | 115 V or 230 V AC mains power | 900 mA |
1 | 80 mm x 30 mm 23 mm | Output voltage 9-12 V; intended for 3s3p LEDs. IP67 dust/water rating. | |
LED-L10W |
DealExtreme $7.20 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 900 mA |
1 | 61 mm x 28 mm x 22 mm | Output voltage 7-12 V; intended for 3s3p LEDs. DX 164916 has the same model number, is cheaper and water resistant but a little larger. | |
LED-L10W silver case, 1x10W mains driver |
FastTech $4.53 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 900 mA |
1 | 75 mm x 29 mm x 22 mm | Output voltage 7-12 V. Intended for 3s3p LED arrays. | |
LED-L10W yellow case, 1x10W mains driver |
FastTech $5.53 |
Mains driver | 85-265 V AC | 3 | 115Â V, 230Â V AC mains power | 900 mA |
1 | 75 mm x 29 mm x 22 mm | Output voltage 7-12 V. Intended for 3s3p LED arrays. | |
LED-L10W, (3S3P)x1W mains driver |
DealExtreme $6.82 |
Mains driver | 90-264 V AC | 3 | 115 V or 230 V AC mains power | 900 mA |
1 | 62 mm x 30 mm x 22 mm | Output voltage 9-12 V. Suited for 3S3P LED arrays. IP67 dust/water rating. | |
LED-L1218W-A, (12-18)*1W waterproof mains driver |
Focalprice $10.09 |
Mains driver | 85-265 V AC | 12-18 | 115 V or 230 V AC mains power | 91% | 320 mA |
1 | 145 mm x 25 mm x 18 mm | Output voltage 30-75 V. Note that this voltage represents a shock hazard - use with caution. IP67 dust/water rating. |
LED-L1525W-A, (15-25)*1W waterproof mains driver |
Focalprice $12.91 |
Mains driver | 85-265 V AC | 15-25 | 115 V or 230 V AC mains power | 91% | 320 mA |
1 | 146 mm x 28 mm x 22 mm | Output voltage 30-75 V. Note that this voltage represents a shock hazard - use with caution. IP67 dust/water rating. |
LED-L1525W-A, (15-25)x1W mains driver |
DealExtreme $12.60 |
Mains driver | 85-265 V AC | 15-25 | 115 V or 230 V AC mains power | 300 mA |
1 | 130 mm x 29 mm x 22 mm | Output voltage 50-90 V. Note that this voltage represents a shock hazard - use with caution. IP68 dust/water rating. | |
LED-L2030W-A, (20-30)*1W waterproof mains driver |
Focalprice $13.63 |
Mains driver | 85-265 V AC | 20-30 | 115 V or 230 V AC mains power | 91% | 320 mA |
1 | 145 mm x 28 mm x 22 mm | Output voltage claimed 60-100 V, although one reviewer measured 94-95 V no load. Note that this voltage represents a shock hazard - use with caution. IP67 dust/water rating. |
LED-L2030W-A, (20-30)x1W mains driver |
DealExtreme $13.60 |
Mains driver | 85-265 V AC | 20-30 | 115 V or 230 V AC mains power | 320 mA |
1 | 144 mm x 29 mm x 22 mm | Output voltage 60-100 V. Note that this voltage represents a shock hazard - use with caution. IP68 dust/water rating. | |
LED-L20W, (7-10)*3W/20W waterproof mains driver |
Focalprice $11.29 |
Mains driver | 85-265 V AC | 7-10 | 115 V or 230 V AC mains power | 91% | 680 mA |
1 | 110 mm x 28 mm x 22 mm | Output voltage 20-36 V. IP67 dust/water rating. |
LED-L2536W-A, (25-36)*1W waterproof mains driver |
Focalprice $15.96 |
Mains driver | 85-265 V AC | 25-36 | 115 V or 230 V AC mains power | 91% | 300 mA |
1 | 120 mm x 37 mm x 28 mm | Output voltage claimed 85-128 V. Note that this voltage represents a shock hazard - use with caution. IP67 dust/water rating. |
LED-L2536W-B yellow case, (7-12)x3W mains driver |
FastTech $11.09 |
Mains driver | 85-265 V AC | 7-12 | 115Â V, 230Â V AC mains power | 650 mA |
1 | 145 mm x 28 mm x 22 mm | Output voltage 24-45 V. | |
LED-L2536W-B, (7-12)*3W waterproof mains driver |
Focalprice $11.59 |
Mains driver | 85-265 V AC | 7-12 | 115 V or 230 V AC mains power | 91% | 680 mA |
1 | 143 mm x 28 mm x 22 mm | Output voltage 24-45 V. IP67 dust/water rating. |
LED-L2536W-B, (7-12)x3W mains driver |
Tmart $9.60 |
Mains driver | 85-265 V AC | 7-12 | 115 V or 230 V AC mains power | 650 mA |
1 | 143 mm x 29 mm x 22 mm | Output voltage 24-45 V. | |
LED-L30W, (10*3)*1W/30W waterproof mains driver |
Focalprice $15.06 |
Mains driver | 85-265 V AC | 6-10 | 115 V or 230 V AC mains power | 91% | 900 mA |
1 | 152 mm x 37 mm x 28 mm | Output voltage 20-36 V. IP67 dust/water rating. |
LED-L30W, (10S3P)x1W mains driver |
FastTech $11.77 |
Mains driver | 100-240 V AC | 8-12 | 115 V or 230 V AC mains power | 900 mA |
1 | 98 mm x 38 mm x 29 mm | Output voltage 21-40 V. | |
LED-L50W, (10*5)*1W/50W waterproof mains driver |
Focalprice $27.01 |
Mains driver | 85-265 V AC | 8-12 | 115 V or 230 V AC mains power | 91% | 1700 mA |
1 | 152 mm x 37 mm x 28 mm | Output voltage 28-40 V. IP67 dust/water rating. |
LED-L50W, 28-40V 50W mains driver |
Tmart $15.80 |
Mains driver | 85-265 V AC | 8-12 | 115 V or 230 V AC mains power | 1500 mA |
1 | 145 mm x 37 mm x 28 mm | Output voltage 28-40 V. | |
LED-L70W, (10*7)*1W/70W waterproof mains driver |
Focalprice $32.46 |
Mains driver | 85-265 V AC | 8-10 | 115 V or 230 V AC mains power | 89-91% | 2100 mA |
1 | 176 mm x 50 mm 38 mm | Output voltage 20-38 V. IP66 (photo) or IP67 (description) dust/water rating. |
LEDUPS 1x1W mains driver |
DealExtreme $6.90 |
Mains driver | 85-245 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 330 mA |
1 | 1 white LED included (in a fancy aluminium holder). | ||
LEF-1265-10W(3*3) |
DealExtreme $5.70 |
Mains driver | 90-265 V AC | 3 | 115 V or 230 V AC mains power | 85% | 900 mA |
1 | 66 mm x 31 mm x 23 mm | Output voltage 7-12 V. |
LEF-30W, (7-11)x1W mains driver |
FastTech $12.02 |
Mains driver | 85-277 V AC | 7-11 | 115 V or 230 V AC mains power | 900 mA |
1 | 132 mm x 52 mm x 39 mm | Output voltage 18-35 V. | |
LEF-50W, (7-11)x1W mains driver |
FastTech $15.90 |
Mains driver | 85-277 V AC | 7-11 | 115 V or 230 V AC mains power | 1500 mA |
1 | 132 mm x 52 mm x 39 mm | Output voltage 18-35 V. | |
LEF-70W, (7-11)x1W mains driver |
FastTech $25.58 |
Mains driver | 85-277 V AC | 7-11 | 115 V or 230 V AC mains power | 2100 mA |
1 | 132 mm x 52 mm x 39 mm | Output voltage 18-35 V. | |
LHF11D18X1W, (11-18)x1W mains driver |
DealExtreme $4.45 |
Mains driver | 85-265 V AC | 11-18 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 72 mm x 35 mm x 22 mm | Output voltage 30-65 V. Note that this voltage represents a shock hazard - use with caution. | |
LHF1D3X1W, (1-3)x1W mains driver |
DealExtreme $2.64 |
Mains driver | 85-265 V AC | 1-3 | 115 V or 230 V AC mains power | 300 mA |
1 | 50 mm x 28 mm x 22 mm | Output voltage 3-11 V. | |
LHF1X3W, 1x3W mains driver |
DealExtreme $2.89 |
Mains driver | 85-265 V AC | 1-2 | 115 V or 230 V AC mains power | 600 mA |
1 | 50 mm x 27 mm x 22 mm | Output voltage 3-8 V. | |
LHF3D4X3W, (3-4)x3W mains driver |
DealExtreme $3.76 |
Mains driver | 85-265 V AC | 3-4 | 115 V or 230 V AC mains power | 630 mA |
1 | 55 mm x 22 mm x 21 mm | Output voltage 8-16 V. | |
LHF4D5X2W, (4-5)x2W mains driver |
DealExtreme $3.76 |
Mains driver | 85-265 V AC | 4-5 | 115Â V, 230Â V AC mains power | 450 mA |
1 | 56 mm x 31 mm x 21 mm | Output voltage 9-20 V. | |
LHF4D5XW, (4-5)x1W mains driver |
DealExtreme $2.92 |
Mains driver | 85-265 V AC | 3-5 | 115 V or 230 V AC mains power | 300 mA |
1 | 50 mm x 28 mm x 22 mm | Output voltage 6-18 V. | |
LHF5D10X1W, (5-10)x1W mains driver |
DealExtreme $4.23 |
Mains driver | 85-265 V AC | 5-10 | 115 V or 230 V AC mains power | 300 mA |
1 | 55 mm x 30 mm x 21 mm | Output voltage 15-40 V. IP67 dust/water rating. | |
LHF6D10X1W, (6-10)x1W mains driver |
DealExtreme $4.20 |
Mains driver | 85-265 V AC | 6-10 | 115 V or 230 V AC mains power | 300 mA |
1 | 55 mm x 32 mm x 21 mm | Output voltage 15-40 V. | |
LHF8D12X1W, (8-12)x1W mains driver |
DealExtreme $4.46 |
Mains driver | 85-265 V AC | 8-12 | 115 V or 230 V AC mains power | 280 mA |
1 | 55 mm x 30 mm x 22 mm | Output voltage 20-45 V. | |
Light & Time RGB LED strip controller |
DealExtreme $22.34 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 6000 mA |
1 | 125 mm x 70 mm x 25 mm | Light sensor and time control. 3 channel, maximum 2 A per channel. IR remote control. | |
Light Flashing Controller |
DealExtreme $13.30 |
User interface driver | 8.0-16 V | N/A | 12 V automotive | 12.5 A |
1 | 59 mm x 59 mm x 52 mm | Provides variable speed flashing. Maximum power handling 100 W. Claimed waterproof (no IP rating given) and shockproof. | |
Lightech 10 W (350 mA) |
LED Supply $26.99 + shipping |
Mains driver | 100-265 V AC | 1-8 | 115 V or 230 V AC mains power | 80% | 350 mA |
1 | 86 mm x 35 mm x 27 mm (ali case); 100 mm x 40 mm x 28 mm (plastic case) | Output voltage 2.3-28 V. "Electronic internal resettable short circuit protection. Thermal protection and overload regulation." "Waterproof potting." |
Lightech 18 W (700 mA) |
LED Supply $34.99 + shipping |
Mains driver | 85-277 V AC | 3-7 | 115 V or 230 V AC mains power | 80% | 700 mA |
1 | 133 mm x 40 mm x 31 mm | Output voltage 10-24 V. "Electronic internal resettable short circuit protection. Thermal protection and overload regulation." "Waterproof potting". |
Lightech 36 W (700 mA) |
LED Supply $63.99 + shipping |
Mains driver | 100-265 V AC | 4-17 | 115 V or 230 V AC mains power | 82% | 700 mA |
1 | 133 mm x 40 mm x 31 mm | Output current 650-750 mA, output voltage 12-58 V. "Electronic internal resettable short circuit protection. Thermal protection and overload regulation." "Waterproof potting". |
Lightech 4 W (350 mA) |
LED Supply $14.99 + shipping |
Mains driver | 100-240 V AC | 1-5 | 115 V or 230 V AC mains power | 350 mA |
1 | 45 mm x 45 mm x 25 mm | Output voltage 2-14 V. "Electronic internal resettable short circuit protection. Thermal protection and overload regulation." IP67 dust/water rating. | |
Low voltage 9W driver |
DealExtreme $4.69 |
Buck driver | 12-24 V DC; also works with AC | 1-3 | 12 V, 24 V AC/DC | 85% | 900 mA |
1 | 63 mm x 30 mm x 20 mm | Output voltage 3-10 V. IP67 dust/water rating. Suitable for 3S3P LED arrays. |
LP001 3*1W mains driver |
Focalprice $2.69 |
Mains driver | 85-265 V AC | 3 | 115 V or 230 V AC mains power | 73% | 320 mA |
1 | 55 mm x 30 mm x 25 mm | Output voltage 9-11 V. |
LPC-60-1750 |
DealExtreme $30.20 |
Mains driver | 100-240 V AC | 3-10 | 115 V or 230 V AC mains power | 87% | 1750 mA |
1 | 162 mm x 42 mm x 32 mm | Output voltage 9-34 V. IP67 dust/water resistance. |
LPN3-W1A350, (1-3)x1W mains driver |
DealExtreme $4.70 |
Mains driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 80% | 350 mA |
1 | 53 mm x 28 mm x 20 mm | Output voltage maximum 11 V. |
LS 1 x 1 W |
DealExtreme $7.20 |
Mains driver | 86-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 300 mA |
1 | Output current ±5%. 1 white LED included (in a fancy aluminium holder). |
||
LS 1 x 3 W |
DealExtreme $10.20 |
Mains driver | 86-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 700 mA |
1 | Claimed 3W output but driver label says 300 mA ±5%. Buyer beware. 1 white LED included (in a fancy aluminium downlight). |
||
LS 3 x 1 W |
DealExtreme $13.60 |
Mains driver | 86-265 V AC | 3
1 LED included |
115 V or 230 V AC mains power | 300 mA |
1 | Output current ±5%. 3 white LEDs included (in a fancy aluminium holder). |
||
LS 4-7x1 W |
DealExtreme $19.90 |
Mains driver | 100-240 V AC | 4-7
5 LEDs included |
115 V or 230 V AC mains power | 320 mA |
1 | 5 white LEDs included (in a fancy acrylic downlight). | ||
LS1*1W37 |
DealExtreme $9.00 |
Mains driver | 85-265 V AC | 1
1 LED included |
115 V or 230 V AC mains power | 300 mA |
1 | May be a poorly labelled version of LS 1 x 1 W. 1 white LED included (in a fancy aluminium holder). |
||
LT-3090-350, 3 Channel Power Repeater |
LCK-LED $30.00 + shipping |
Buck driver | 12-48 V | 3-36 | 350 mA |
1 | 121 mm x 39 mm x 39 mm | 1-12 LEDs on each of three 350 mA channels. Conflicting specifications, 48 V max input in title, but 24 V max input in description. Manual also says 48 V. Can be used with RGB controller. | ||
LT-3090-700, 3 Ch Power Repeater |
LCK-LED $35.00 + shipping |
Buck driver | 12-48 V | 3-36 | 700 mA |
1 | 121 mm x 39 mm x 39 mm | 1-12 LEDs on each of three 700 mA channels. Manual. Can be used with RGB controller. | ||
Ludde (USB car supply) |
DealExtreme $3.31 |
Buck driver | 10-14.5 V (approx) |
0
1 LED included |
12 V car battery | 1000 mA |
1 | 100 mm long | Buck regulator, not specifically a LED driver but is an inexpensive way to get a low voltage LED driver working with 12 V. Designed to plug into a car lighter socket to provide a USB socket. Constant voltage output 5.5 V (not actually within USB spec, which is maximum 5.25 V). Can do somewhere around 700-1000 mA before dropping out of regulation. Cute little red LED to show it's working. Tip: Does not charge iPods but there is a work-around using a couple of resistors to apply a mid-voltage to the two data pins. |
|
LX(12-18)*1W mains driver |
DealExtreme $5.13 |
Mains driver | 100-240 V AC | 12-18 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 90 mm x 37 mm x 21 mm | Output voltage 40-65 V. Note that this voltage represents a shock hazard - use with caution. | |
LX(18-25)*1W |
DealExtreme $6.69 |
Mains driver | 100-240 V AC | 18-25 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 110 mm x 43 mm x 23 mm | Output voltage 58-85 V. Note that this voltage represents a shock hazard - use with caution. | |
LX(25-36)*1W mains driver |
DealExtreme $6.50 |
Mains driver | 100-240 V AC | 25-36 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 117 mm x 42 mm x 28 mm | Output voltage 75-138 V. Note that this voltage represents a shock hazard - use with caution. | |
LX(4-7)*1W mains driver |
DealExtreme $3.57 |
Mains driver | 100-240 V AC | 4-7 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 70 mm x 35 mm x 22 mm | Output voltage 12-28 V. | |
LX(8-12)*1W |
DealExtreme $4.62 |
Mains driver | 100-240 V AC | 8-12 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 90 mm x 38 mm x 21 mm | Output voltage 24-40 V. | |
LY-220V RGB, 10W |
DealExtreme $11.84 |
User interface driver | 110-240 V AC | 3 | 115Â V, 230Â V AC mains power | 350 mA |
1 | 80 mm x 39 mm x 23 mm | Output voltage red 7.0-7.5 V, blue and green 9-11 V. Designed to be used to power 3 series LEDs in each of red, green and blue. Comes with remote control to adjust colours and modes. | |
LY-220V RGB, 30W |
DealExtreme $18.50 |
Mains driver | 110-240 V AC | 10 | 115 V or 230 V AC mains power | 350 mA |
1 | 77 mm x 50 mm x 28 mm | Output voltage estimated to be red 23-25 V, blue and green 30-36 V. Designed to be used to power 10 series LEDs in each of red, green and blue. Comes with remote control to adjust colours and modes. | |
LY-220V, 60W RGB mains driver |
DealExtreme $44.30 |
Mains driver | 170-260 V AC | 9-11 | 230 V AC mains power | 1800 mA |
1 | 149 mm x 69 mm x 44 mm | Output voltage red 20-26 V, green 30-36 V, blue 30-36 V. 3 channel, presumably 600 mA per channel. | |
LZ-220V5W, 4W dimmable mains driver |
DealExtreme $7.99 for 5 |
Mains bulb driver | 220-240 V AC | 4-5 | 230 V AC mains power | 95% | 300 mA |
1 | 25 mm x 18 mm x 10 mm | Output voltage 12-18 V. Dimmable. For a 120V version see DX 323195. |
LZ-TG-220V5W, 4W dimmable mains driver |
DealExtreme $8.49 for 5 |
Mains bulb driver | 110-120 V AC | 4-5 | 115 V AC mains power | 95% | 300 mA |
1 | 25 mm x 18 mm x 10 mm | Output voltage 12-18 V. Dimmable. For a 230V version see DX 325130. |
LZ220V (2-3x1W) mains driver |
DealExtreme $3.90 |
Mains driver | 85-265 V AC | 2-4 | 115 V or 230 V AC mains power | 80% | 300 mA |
1 | 54 mm x 27 mm x 21 mm | Output voltage 6-13 V. |
LZ220V (4-5x1W) mains driver |
DealExtreme $4.20 |
Mains driver | 85-265 V AC | 4-5 | 115 V or 230 V AC mains power | 80% | 300 mA |
1 | 55 mm x 27 mm x 22 mm | Output voltage 12-17 V. |
LZ220V 100W (10s10p) water resistant mains driver |
DealExtreme $44.00 |
Mains driver | 85-265 V AC | 9-11 | 115 V or 230 V AC mains power | 85% | 3000 mA |
1 | 154 mm x 70 mm x 43 mm | Output voltage 30-36 V. IP67 dust/water rating. |
LZ220V 100W, (10Sx10P)x1W mains driver |
DealExtreme $41.50 |
Mains driver | 85-265 V AC | 10-12 | 115 V or 230 V AC mains power | 85% | 3000 mA |
1 | 156 mm x 70 mm x 42 mm | Output voltage 30-36 V. IP67 dust/water rating. |
LZ220V 20W, (8-12)x2W mains driver |
DealExtreme $11.30 |
Mains driver | 85-265 V AC | 8-12 | 115 V or 230 V AC mains power | 85% | 600 mA |
1 | 105 mm x 36 mm x 24 mm | Output voltage 25-45 V. IP67 dust/water rating. |
LZ220V 40W (10s4p) water resistant mains driver |
DealExtreme $19.50 |
Mains driver | 90-265 V AC | 9-11 | 115 V or 230 V AC mains power | 85% | 1200 mA |
1 | 137 mm x 42 mm x 31 mm | Output voltage 30-36 V. IP67 dust/water rating. |
LZ220V 50W (8-10s5p) water resistant mains driver |
DealExtreme $21.40 |
Mains driver | 90-265 V AC | 7-11 | 115 V or 230 V AC mains power | 85% | 1500 mA |
1 | 137 mm x 43 mm x 32 mm | Output voltage 24-36 V. IP67 dust/water rating. |
LZ220V 60W, (10S6P)x1W mains driver |
DealExtreme $24.66 |
Mains driver | 90-265 V AC | 10 | 115 V or 230 V AC mains power | 85% | 1800 mA |
1 | 145 mm x 51 mm x 42 mm | Output voltage 30-36 V. Intended for 10S6P LED arrays. IP67 dust/water rating. |
LZ220V 70W, (10S7P)x1W mains driver |
DealExtreme $28.79 |
Mains driver | 85-265 V AC | 10 | 115 V or 230 V AC mains power | 85% | 2100 mA |
1 | 165 mm x 50 mm x 43 mm | Output voltage 30-36 V. Intended for 10S7P LED arrays. IP67 dust/water rating. Fake CE rating. |
LZ220V 80W (10s8p) water resistant mains driver |
DealExtreme $32.90 |
Mains driver | 85-265 V AC | 9-11 | 115 V or 230 V AC mains power | 85% | 2400 mA |
1 | 163 mm x 50 mm x 41 mm | Output voltage 30-36 V. IP67 dust/water rating. |
LZ220V 80W, (10Sx8P)x1W mains driver |
DealExtreme $30.90 |
Mains driver | 85-265 V AC | 10-12 | 115 V or 230 V AC mains power | 85% | 2400 mA |
1 | 164 mm x 50 mm x 40 mm | Output voltage 30-36 V. IP67 dust/water rating. |
LZ220V(6-12x1W), 12W mains driver |
DealExtreme $5.70 |
Mains driver | 85-265 V AC | 6-12 | 115 V or 230 V AC mains power | 85-90% | 300 mA |
1 | 80 mm x 30 mm x 22 mm | Output voltage 18-40 V. IP67 dust/water rating. |
LZ220V, (18-25)x1W mains driver |
DealExtreme $9.90 |
Mains driver | 85-265 V AC | 18-25 | 115 V or 230 V AC mains power | 85% | 300 mA |
1 | 105 mm x 37 mm x 25 mm | Output voltage 54-86 V. Note that this voltage represents a shock hazard - use with caution. IP67 dust/water rating. Short circuit, over current and overload protection. |
LZ225V 30W, (8-12)x3W mains driver |
DealExtreme $16.65 |
Mains driver | 90-265 V AC | 8-12 | 115 V or 230 V AC mains power | 85% | 900 mA |
1 | 125 mm x 35 mm x 30 mm | Output voltage 25-45 V. IP67 dust/water rating. |
LZ68810-100W, 100W mains driver |
DealExtreme $26.59 |
Mains driver | 85-265 V AC | 10-12 | 115Â V, 230Â V AC mains power | 88% | 3000 mA |
1 | 136 mm x 64 mm x 39 mm | Output voltage 30-36 V. IP67 dust/water rating. |
M-12 single channel LED dimmer |
DealExtreme $11.00 |
User interface driver | 12-12 V | 3 | 12 V DC | 8 A |
1 | 90 mm x 60 mm x 35 mm | 1 channel, maximum (apparently) 8 A at 12 V DC. | |
Madmax Lite |
Sandwich Shoppe $8.00 + shipping |
Boost driver | 0.8-4.5 V | 1 | 76-88% | 200 mA |
1 | 14 mm | Boost regulator. Unknown output regulation. Maximum power output ~0.75 W. | |
Madmax Plus |
Sandwich Shoppe $8.00 + shipping |
Boost driver | 0.8-5.0 V | 1 | 76-88% | 700 mA |
1 | 14 mm | Boost regulator. Unknown output regulation. Maximum power output ~1.5 W (Plus). | |
Magnetic control, 3A 3 mode LED driver |
KaiDomain $11.82 |
Step-down (non-buck) driver | 2.7-4.2 V | 1 | 1x Li-ion | 3000 mA |
3 | 8 mm high - two boards in double layer | Unknown diameter - buyer beware. 3 modes; high (100%), medium (50%), low (10%). Thermal protection, low voltage protection. | |
Magnetic control, 3A 5 mode LED driver |
KaiDomain $11.82 |
Step-down (non-buck) driver | 2.7-4.2 V | 1 | 1x Li-ion | 3000 mA |
5 | 8 mm high - two boards in double layer | Unknown diameter - buyer beware. 3 modes; high (100%), medium (50%), low (10%), 10 Hz strobe, SOS. Thermal protection, low voltage protection. | |
MagTech L03U-350 3 Watt Mains Driver |
LED Supply $13.99 + shipping |
Mains driver | 95-250 V AC | 1-4 | 115 V or 230 V AC mains power | 350 mA |
1 | 40 mm x 40 mm x 22 mm | Alternative versions mentioned on the datasheet are for outputs of either 700 or 1,000 mA, single LED. | |
MagTech LA1012-24 12 Watt Mains Driver |
LED Supply $24.99 + shipping |
Mains driver | 100-240 V AC | 1-8 | 115 V or 230 V AC mains power | 500 mA |
1 | 85 mm x 35 mm x 23 mm | Maximum output voltage 24 V (12 W). IP66 dust/water rating. The datasheet is poked. | |
MagTech LP1025-24 25 Watt Mains Driver |
LED Supply $39.99 + shipping |
Mains driver | 100-277 V AC | 4-8 | 115 V or 230 V AC mains power | 1040 mA |
1 | 80 mm x 62 mm x 25 mm | Output voltage 12-24 V. IP54 or IP66 dust/water rating (apparently for indoor and outdoor versions, although there's no indication of how they are distinguished when ordering). Alternative versions mentioned on the datasheet have outputs of 700 mA (18-36 V) or 2,080 mA (8-12 V). | |
MagTech LP1090-24-170 96 Watt Mains Driver |
LED Supply $99.99 + shipping |
Mains driver | 90-264 V AC | 4-8 | 115 V or 230 V AC mains power | 4000 mA |
1 | 170 mm x 64 mm x 38 mm | Output voltage 12-24 V. IP64 dust/water rating. | |
Mains Power Supply for 1-3x 1 W LEDs |
Led-Tech $11.00 (approx) |
Mains driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 350 mA |
1 | 36 mm x 26 mm x 22 mm | Presumably a transformer and buck driver. Output constant current at 0.5-10 V DC. Overload protection, short circuit protection. IP65 housing. | |
Mains Power Supply for 10-18x 1 W LEDs |
Led-Tech $18.00 (approx) |
Mains driver | 100-240 V AC | 10-18 | 115 V or 230 V AC mains power | 350 mA |
1 | 127 mm x 40 mm x 23 mm | Presumably a transformer and buck driver. Output constant current at 30-72 V DC. Overload protection, short circuit protection. | |
Mains Power Supply for 1x 3 W LEDs |
Led-Tech $11.00 (approx) |
Mains driver | 100-240 V AC | 1 | 115 V or 230 V AC mains power | 700 mA |
1 | 36 mm x 26 mm x 22 mm | Presumably a transformer and buck driver. Output constant current at 0.5-4 V DC. Overload protection, short circuit protection. IP65 housing. | |
Mains Power Supply for 3-4x 3 W LEDs |
Led-Tech $14.00 (approx) |
Mains driver | 100-240 V AC | 3-4 | 115 V or 230 V AC mains power | 700 mA |
1 | 110 mm x 40 mm x 23 mm | Presumably a transformer and buck driver. Output constant current at 9-16 V DC. Overload protection, short circuit protection. | |
Mains Power Supply for 5-8x 3 W LEDs |
Led-Tech $18.00 (approx) |
Mains driver | 100-240 V AC | 5-8 | 115 V or 230 V AC mains power | 700 mA |
1 | 36 mm x 26 mm x 22 mm | Presumably a transformer and buck driver. Output constant current at 15-36 V DC. Overload protection, short circuit protection. | |
Mains Power Supply for 6-10x 1 W LEDs |
Led-Tech $14.00 (approx) |
Mains driver | 100-240 V AC | 6-10 | 115 V or 230 V AC mains power | 350 mA |
1 | 110 mm x 40 mm x 23 mm | Presumably a transformer and buck driver. Output constant current at 18-36 V DC. Overload protection, short circuit protection. | |
MaxFlex v5A |
TaskLED $35.00 + shipping |
Boost driver | 2.5-20 V | 1-8 | 83-93% | 1300 mA |
8 | 23 mm | Boost regulator. Vin must be less than Vout. User configurable constant current, 350-1300 mA (increased from 1200 mA) at up to 29 V (increased from 24 V). uController UI, status LED. Open circuit protected, polarity protected. Â Shark vs MaxFlex forum thread. |
|
MC-E Color and Dynamic White 17mm RGBW Driver |
Intl Outdoor Store $6.75 |
Step-down (non-buck) driver | 3.0-4.2 V | 1-4 | 1x Li-ion | 2800 mA |
12 | 17 mm | Designed to be used with common positive multi-colour RGBW LEDs such as this 4 colour MC-E or a dynamic white MC-E. Four channel; 600-700 mA per channel. 12 modes in 2 groups; change group by soldering/switching stars. See p-687 for 20 mm version. | |
MC-E Color and Dynamic White 20mm RGBW Driver |
Intl Outdoor Store $6.85 |
Step-down (non-buck) driver | 3.0-4.2 V | 1-4 | 1x Li-ion | 2800 mA |
12 | 20 mm | Driver removed from site. Designed to be used with common positive multi-colour RGBW LEDs such as this 4 colour MC-E or a dynamic white MC-E. Four channel; 600-700 mA per channel. 12 modes in 2 groups; change group by soldering/switching stars. See p-686 for 17 mm version or p-645 for a single group 20 mm version. |
|
MC-E Colour Multi-Mode RGBW Circuit Board |
Intl Outdoor Store $5.79 |
Step-down (non-buck) driver | 3.0-4.2 V | 1 | 1x Li-ion | 2800 mA |
8 | 20 mm | Driver removed from site. Microcontroller with 4 D882 transistors; unknown regulation quality. Designed to be used with common positive multi-colour RGBW LEDs such as this 4 colour MC-E. Output current is 4x 700 mA. 8 modes without memory; white, red, green, blue, white-red-green-blue strobe, red-blue police strobe, white strobe, red SOS. |
|
MC-E/P7 bad driver |
KaiDomain $12.18 |
Buck driver | 5.5-15 V | 1 | 76-83% | 2800 mA |
1 | 17 mm double sided board (formerly 19 mm) | It's hard taking KD's site seriously when so many random colours and sizes of text is used to describe the board, with missing graphics liberally distributed as well. (The site has since been updated.) Inconsistent specifications, with output current listed as 2.8 A and 3.0 A and input voltage listed as 5.5-15 V and 4.0-12.0 V. Three mode; low (5%), high (100%), medium (35%) - also listed as high (2.8 A), medium (1.38 A [49%]), low (0.25 A [9%]). The runtimes given don't stack up. There are two versions (with 3 and 5 modes) which look identical and either might be sent to fill an order. Buyer beware. This driver gets a bad review here. StefanFS here says it gets really hot with 8 AA cells, while CM here calculates over 2 W of heat dissipated in high mode - toasty - while showing the claimed 90-95% efficiency is imaginary. Appears to be the same as e-lectronics sku 464. Formerly product ID 1866. |
|
MC-E/P7 driver, 5 mode |
KaiDomain $8.18 each |
Buck driver | 5.5-12 V | 1 | 3000 mA |
5 | 19 mm | Uses PWM for 5 modes; low (10%), medium (50%), high (100%), fast strobe, SOS. If driving a Cree MC-E its four dice must be parallel connected. Also available as a 5 pack. Both product pages have photos of two different drivers. Buyer beware. This driver gets a bad review here. Formerly product ID 7947. |
||
Mean Well ELN-60-48D |
rapidled.com $34.00 |
Mains driver | 90-264 V AC (127-370 V DC) |
8-14 | 115 V or 230 V AC mains power | 88% | 1300 mA |
1 | 181 mm x 62 mm x 35 mm | Dimmable 0-1.3 A using 0-10 V signal. Water resistant, IP64 rating. Output 24-48 V. Datasheet. |
Mean Well ELN-60-48P |
rapidled.com $34.00 |
Mains driver | 90-264 V AC (127-370 V DC) |
8-14 | 115 V or 230 V AC mains power | 88% | 1300 mA |
1 | 181 mm x 62 mm x 35 mm | Dimmable 0-1.3 A using PWM input signal. Water resistant, IP64 dust/water rating. |
Mean Well LPC-35-700W |
rapidled.com $16.00 + shipping |
Mains driver | 90-264 V AC (127-370 V DC) |
3-14 | 115 V or 230 V AC mains power | 85% | 700 mA |
1 | 148 mm x 40 mm x 30 mm | Output voltage 9-48 V. IP67 dust/water rating. Short circuit, over current, and over voltage protection. Datasheet. |
Mean Well LPC-60-1050 |
rapidled.com $26.00 + shipping |
Mains driver | 90-264 V AC (127-370 V DC) |
3-14 | 115 or 230 V AC mains power | 87% | 1050 mA |
1 | 163 mm x 43 mm x 32 mm | Output voltage 9-48 V. IP67 dust/water rating. Short circuit, over voltage, and over current protection. Claims to be suitable for XP-Gs only and that using it with XP-Es may cause them to blow. At only just over 1 A this sounds paranoid, and was probably a warning intended for the higher output drivers in the same range. The retailer was also careless with specifying the voltage range - correct range taken from datasheet. |
MERSLED 9180, 3x5W mains driver |
FastTech $6.16 |
Mains driver | 100-240 V AC | 3 | 115Â V, 230Â V AC mains power | 85% | 950 mA |
1 | 65 mm x 31 mm x 24 mm | Output current is assumed; current draw of 950 mA is nonsensical. Output voltage up to 16.8 V (from a discussion thread). |
Micro 1500 |
PCB Components $29.00 (approx) |
Buck driver | 5.0-28 V | 1-10 | 94% | 1500 mA |
1 | 23 mm | 1 V overhead. External PWM input. Efficiency claimed is maximum; typical efficiency unknown. | |
Micro 2800 |
PCB Components $29.00 (approx) |
Buck driver | 5.0-18 V | 1-4 | 94% | 2800 mA |
1 | 23 mm | 1 V overhead. Efficiency claimed is maximum; typical efficiency unknown. Report from a reader: "I have tested it [for] hundreds hours, no problems and no need to heatsink for 2 LEDs with 9 V." | |
MicroPuck |
LED Supply $9.99 + shipping |
Boost driver and buck driver | 0.8-3.0 V (as boost; 4.0-8.0 V as buck) |
1-2 | 62-89% | 500 mA |
1 | 12 mm x 8 mm x 7 mm | Can be used as either a buck, or boost, or buck/boost driver - see the Application Notes for connection diagrams and other info. Not a constant current output; they claim this is a design feature to mimic the light dropoff of an incandescent bulb. I'm not convinced. Maximum 8 V output. Can be used in parallel. Efficiency as a boost driver claimed 70-82% (measured at 64-78% in a test with an XP-G here), as a buck driver 82-89%; as a buck/boost driver 62-72%. The datasheet doesn't claim an IP rating but does say "The 2009A is encapsulated by an insulating epoxy and is resistant to harsh environments and moisture." Available in three versions with nominal outputs of 350, 400 (error in window title bar) and 500 mA. |
|
Mini Boost |
PCB Components $23.00 (approx) |
Boost driver | 2.7-18 V | 1-12 | 93% | 200 mA |
1 | 25 mm x 12 mm x 4 mm | Maximum output voltage 38 V. Maximum input current 500 mA. Output current set by solder jumpers in 9 steps from 10 mA to 200mA. Dimming by PWM signal. Soft start. Maximum claimed efficiency listed here; typical efficiency for any particular configuration unknown. Suitable for Cree MP-L. |
|
Mini Constant Current Power Supply with rectifier, |
Led-Tech $2.80 (approx) |
Linear regulator | 6.5-38 V DC; also works with AC (4.5-26 V AC) |
1-10 | 7-45% | 100 mA |
1 | 16 mm x 7.5 mm x 3 mm | Linear regulator based on a LM317 voltage regulator chip, with a rectifier so it can cope with AC (and can be connected either way with DC). Available in nine versions providing 10 mA, 20 mA, 30 mA, 40 mA, 50 mA, 60 mA, 70 mA, 80 mA and 100 mA. Supply voltage needs to be at least 3.8 V higher than total LED Vf and not more than 38, 27, 18, 14, 12, 10, 9, 8 or 7 V higher respectively for the different versions. Efficiency figures are given for a single LED but could theoretically be as high as 90% for a string. | |
Mini Constant Current Power Supply, |
Led-Tech $2.80 (approx) |
Linear regulator | 5.2-37 V | 1-10 | 7-52% | 100 mA |
1 | 16 mm x 7.5 mm x 3 mm | Linear regulator based on a LM317 voltage regulator chip, available in nine versions providing 10 mA, 20 mA, 30 mA, 40 mA, 50 mA, 60 mA, 70 mA, 80 mA and 100 mA. Supply voltage needs to be at least 2.5 V higher than total LED Vf and not more than 37, 27, 18, 14, 12, 10, 9, 8 or 7 V higher respectively for the different versions. Efficiency figures are given for a single LED but it could theoretically be as high as 93% for a string. | |
Mini FLu-PIC |
tncproducts.com $25.00 + shipping |
Unspecified driver type | N/A | 0 | 600 mA |
1 | 11 mm | Product has vanished from retailer's site. As with the FLu-PIC, specs aren't given. It does claim to have multiple modes, though: Hi/Burst (450-600 mA), User Set, Low, Off, Brightness Set (for user set level) between 1-10 levels. |
||
Mini SMD Buck |
PCB Components $11.40 (approx) |
Buck driver | 3.5-9.0 V | 1 | 92% | 1100 mA |
1 | 17 mm | Output drops out of regulation below 4.5 V input, which probably means 1 V overhead. Efficiency claimed is maximum; typical efficiency unknown. | |
MR16 1x1W |
goodluckbuy.com $1.80 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1 | 12 V car battery | 90% | 350 mA |
1 | Product removed from retailer's site. Slightly dodgy specs. Claimed output voltage 2.2-2.4 V is probably wrong. Built-in rectifier, so can be used with AC. |
|
MR16 1x1W |
goodluckbuy.com $2.70 |
MR16 (buck) driver | 12-16 V DC; also works with AC | 1 | 12 V car battery | 330 mA |
1 | 19 mm x 14 mm x 13 mm | Built-in rectifier, so can be used with AC. | |
MR16 1x3W |
goodluckbuy.com $1.92 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1 | 12 V car battery | 90% | 600 mA |
1 | Product removed from retailer's site. Output voltage 3.2-3.6 V. Built-in rectifier, so can be used with AC. |
|
MR16 1x3W |
goodluckbuy.com $2.70 |
MR16 (buck) driver | 12-16 V DC; also works with AC | 1 | 12 V car battery | 650 mA |
1 | 18 mm x 14 mm x 14 mm | Dodgy specs that suspiciously mirror DealExtreme mistakes. Built-in rectifier, so can be used with AC. | |
MR16 3W driver |
DealExtreme $3.55 for 5 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1-3 | 12V AC or DC | 85% | 300 mA Can be modified to 1000 mA |
1 | 28 mm x 18 mm x 8 mm | Output voltage 3-10.5 V. Driver chip MC34063A, which has a 1.5 A maximum (and is specified for DC-DC converters, not constant current LED drivers). Driver comes with SS14 Schottky diode. |
MR16 3W driver |
DealExtreme $3.99 for 5 |
MR16 (buck) driver | 12-18 V DC; also works with AC | 1-3 | 12 V AC or DC | 80% | 650 mA Can be modified to 1000 mA |
1 | 28 mm x 18 mm x 8 mm | Buyer beware - specs are contradictory (1-3x1W or 650 mA?). Output voltage 3-10 V. Driver chip MC34063A, which has a 1.5 A maximum (and is specified for DC-DC converters, not constant current LED drivers). Driver comes with SS14 Schottky diode. |
MR16 3x1W |
goodluckbuy.com $1.46 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 3 | 12 V car battery | 90% | 300 mA |
1 | Product removed from retailer's site. Slightly dodgy specs. Claimed output voltage 2.2-2.4 V is probably wrong, since it also claims to drive 3 LEDs. Built-in rectifier, so can be used with AC. |
|
MR16 3x1W |
goodluckbuy.com $2.70 |
MR16 (buck) driver | 12-16 V DC; also works with AC | N/A | 12 V car battery | 330 mA |
1 | 15 mm x 14 mm x 14 mm | Built-in rectifier, so can be used with AC. | |
MR16 4W driver |
DealExtreme $4.61 for 5 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 1-4 | 12 V AC or DC | 67-80% | 300 mA Can be modified to 1000 mA |
1 | 28 mm x 18 mm x 8 mm | Unknown operation method; presumed to be buck driver. Claimed output voltage 12-18 V, which would be impossible to do even with 12 V AC with just buck, implies buck/boost; this is almost certainly not the case. Driver chip MC34063A, which has a 1.5 A maximum (and is specified for DC-DC converters, not constant current LED drivers). Driver comes with SS14 Schottky diode, and a bridge rectifier so it can be used with AC. Appears to be the same as DX 178343. |
MR16 6W driver |
DealExtreme $3.99 for 5 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 3 | 12 V AC or DC | 90% | 410 mA Can be modified to 1000 mA |
1 | 28 mm x 18 mm x 8 mm | Output voltage 10-12.5 V. Driver chip MC34063A, which has a 1.5 A maximum (and is specified for DC-DC converters, not constant current LED drivers). Driver comes with SS14 Schottky diode. |
MR16 9W driver |
DealExtreme $4.90 for 5 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 3 | 12 V AC or DC | 90% | 600 mA Can be modified to 1000 mA |
1 | 28 mm x 18 mm x 8 mm | Claimed output voltage 9-12 V, which implies 4 LEDs but it's unclear if this is the case, and if so, how many volts DC input it will need. Driver chip MC34063A, which has a 1.5 A maximum (and is specified for DC-DC converters, not constant current LED drivers). Driver comes with SS14 Schottky diode. Available in the "More Options" link in the product page for $4.90. |
MR16 base, 3x1W |
KaiDomain $2.38 for 2 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 3 | 350 mA |
1 | 27 mm x 24 mm x 9 mm | Incomplete and/or stupid specifications given. Looks like it has a built-in rectifier, so can be used with AC. Formerly product ID 10937. |
||
MR16 base, 4x1W |
KaiDomain $2.80 for 2 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 4 | 350 mA |
1 | 27 mm x 24 mm x 9 mm | Incomplete and/or stupid specifications given. Looks like it has a built-in rectifier, so can be used with AC. Formerly product ID 10938. |
||
MR16 driver with 3x red LED |
FastTech $8.34 |
MR16 (buck) driver | 12-12 V DC; also works with AC | 3
3 LEDs included |
12 V AC or DC | 320 mA |
1 | 18 mm x 14 mm x 10 mm | Output current is a guess. Includes 3x 1W red LEDs mounted on a 50 mm diameter board. |
|
MR16 driver, 3W |
DealExtreme $1.71 |
MR16 (buck) driver | 12-17 V DC; also works with AC (12 V AC) |
1-3 | 300 mA Can be modified to 1000 mA |
1 | 25 mm x 14 mm x 11 mm | Incomplete specifications given. MC34063A driver chip, which has a 1.5 A maximum (and is specified for DC-DC converters, not constant current LED drivers). Unknown input voltage range (12 V AC is about 17 V DC). Presumably it can drive 3 LEDs because it's called a "3W" driver. Built-in rectifier, probably four Schottky SS14 diodes. There are MR16 sockets available for them - round (17 mm diameter) and rectangular (28 mm x 17 mm). Tip: If using DC you wouldn't need the rectifier so you could short that out for a few percent efficiency gain, but it will still work with it left intact. |
||
MR16-base driver: 1x 1 W (v2) |
DealExtreme $2.34 |
MR16 (buck) driver | 8.0-25 V DC; also works with AC (claimed 12-40 V for board is wrong as PT4115 is 30 V max) |
1-8 | 12 V car battery |
80-92% | 350 mA Can be modified to 1000 mA |
1 | 18 mm x 14 mm x 11 mm (31 mm x 18 mm x 11 mm including prongs and output terminals) | Buck regulator based on PT4115 chip and Schottky SS14 diode. Earlier version EQB8L chip. They're not quite equivalent as the PT4115 will turn off under 8 V and the EQB8L will still work under 4 V (voltages not including the rectifier on this driver). Constant current out 330 mA - 370 mA (average 350 mA in this table); there's no difference between the two 1 W versions except maybe the set resistor (R270 for 370 mA or R300 for 330 mA). Built-in rectifier, normally four Schottky SS14 diodes. There are MR16 sockets available for them - round (17 mm diameter) and rectangular (28 mm x 17 mm). Tip: If using DC you wouldn't need the rectifier so you could short that out for an estimated 97% efficiency, but it will still work with it left intact. |
MR16-base driver: 1x 3 W (v2) |
DealExtreme $1.99 |
MR16 (buck) driver | 8.0-25 V DC; also works with AC (claimed 12-40 V for board is wrong as PT4115 is 30 V max) |
1-8 | 12 V car battery |
55-97% | 700 mA Can be modified to 1000 mA |
1 | 18 mm x 14 mm x 11 mm (31 mm x 18 mm x 11 mm including prongs and output terminals) | Buck regulator based on PT4115 chip and Schottky SS14 diode. Earlier version EQB8L chip. They're not quite equivalent as the PT4115 will turn off under 8 V and the EQB8L will work under 4 V (voltages not including the rectifier on this driver). Maximum voltage listed is from max rating for output capacitor. Constant current out 650-700 mA. Built-in rectifier, normally four Schottky SS14 diodes. The PT4115 version is said to be quite good with one and quite good or excellent when driving two or more (unfortunately the test results to which I had linked have been withdrawn pending further investigation). For automotive use (~12V) the EQB8L version of this 3 W driver is not very efficient when driving only one LED, but quite good with two (84%); thus the EQB8L seems better suited to lower currents with single LEDs. There are a couple reports of this version emitting RF noise causing interference with car radios and remote locking, but most users haven't found any interference. There are MR16 sockets available for them - round (17 mm diameter) and rectangular (28 mm x 17 mm). Tip: If using DC and sure of polarity you wouldn't need the rectifier so you could short that out for an extra 4-6% efficiency gain, but it will still work with it left intact. |
MR16-base driver: 3x 1 W (v2) |
DealExtreme $1.95 |
MR16 (buck) driver | 8.0-25 V DC; also works with AC (claimed 12-16 V AC for board) |
1-8 | 12 V car battery |
80-95% | 350 mA Can be modified to 1000 mA |
1 | 18 mm x 14 mm x 11 mm (31 mm x 18 mm x 11 mm including prongs and output terminals) | Buck regulator based on PT4115 chip and Schottky SS14 diode. Earlier version EQB8L chip. They're not quite equivalent as the PT4115 will turn off under 8 V and the EQB8L will still work under 4 V (voltages not including the rectifier on this driver). Maximum voltage listed is from max rating for output capacitor. Constant current out 330 mA to 370 mA (average 350 mA in this table); there's no difference between the two 1 W versions except maybe the set resistor (R270 for 370 mA or R300 for 330 mA), but efficiency is unknown when running a 3 LED configuration. Built-in rectifier, normally four Schottky SS14 diodes. There are MR16 sockets available for them - round (17 mm diameter) and rectangular (28 mm x 17 mm). Tip: If using DC you wouldn't need the rectifier so you could short that out for a few percent efficiency gain, but it will still work with it left intact. |
MR16-base drivers: |
DealExtreme $2.53 |
MR16 (buck) driver | 5.0-18 V DC; also works with AC (DC for driver chip, claimed 12-16 V AC for board) |
1-4 | 4-12x NiMH, 5-12x alkaline, 12 V car battery |
350 mA |
1 | 18 mm x 14 mm x 14 mm | Buck regulator based on the discontinued PT4105 chip - see separate notes below. Constant current out 320-350 mA for 1 W versions, 650-700 mA for 3W version (not 320-350 mA as stated). Â These drivers have their own bridge rectifier using low-voltage Schottky diodes, so they can handle (low voltage) AC or DC input. While these drivers are claimed to handle 12-16 V AC, the PT4105 is only specified to handle up to 18 V input, so allowing for perhaps 0.4V drop on each of two Schottky diodes being used at any time in the rectifier, anything over about 13.7 Vrms AC would be outside the PT4105 spec. Â Tip: If using DC you wouldn't need the rectifier so you could short that out, but it will still work (slightly less efficiently) with it left intact. |
|
MT-G2 driver |
FastTech $4.97 |
Step-down (non-buck) driver | 12-15 V | 2 | 3-4x Li-ion | 1000 mA |
1 | 26 mm | Buyer beware. Unknown output voltage. Intended for use with a Cree MT-G2 but that LED is available in three voltage options - 6V, 9V and 36V. The claimed 18V output doesn't make sense. (The MT-G2 does have an 18W power rating.) If the 1000mA output current is correct this could only suit the 6V or 9V versions, as the 36V version is rated for 500mA. Also, the claimed input voltage is 12-15 V but it's said to be suitable for 3-4x Li-ion, not just 4x Li-ion. |
|
MT-G2 driver |
FastTech $4.41 |
Step-down (non-buck) driver | 5.0-15 V | 2 | 4x Li-ion | 900 mA |
1 | 26 mm | Buyer beware. Unknown output voltage. Intended for use with a Cree MT-G2 but that LED is available in three voltage options - 6V, 9V and 36V. The claimed 18V output doesn't make sense. (The MT-G2 does have an 18W power rating.) If the 1000mA output current is correct this could only suit the 6V or 9V versions, as the 36V version is rated for 500mA. Also, the claimed input voltage is 5-12 V but it's said to be suitable for 4x Li-ion, not 2-4x Li-ion. However, the subtitle mentions 12-15V. |
|
MT-G2 driver, 5 mode |
FastTech $4.60 |
Step-down (non-buck) driver | 5.0-12 V | 2 | 3-4x Li-ion | 900 mA |
5 | 26 mm | 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. Buyer beware. Unknown output voltage. Intended for use with a Cree MT-G2 but that LED is available in three voltage options - 6V, 9V and 36V. The claimed 18V output doesn't make sense. (The MT-G2 does have an 18W power rating.) If the 1000mA output current is correct this could only suit the 6V or 9V versions, as the 36V version is rated for 500mA. Also, the claimed input voltage is 5-12 V but it's said to be suitable for 4x Li-ion, not 2-4x Li-ion. However, the subtitle mentions 12-15V. |
|
MT-LQ103A 3x1W mains driver |
DealExtreme $15.80 |
Mains driver | 220-240 V AC | 3
1 LED included |
230 V AC mains power | 330 mA |
1 | Output voltage 8-11 V (estimate). 3 warm white LEDs included (in an aluminium downlight). |
||
Multi-cell driver |
Intl Outdoor Store $12.50 |
Buck driver | 5.5-12.6 V | 1-3 | 2-3x Li-ion | 3500 mA |
3 | 21 mm x 23 mm high - two boards in double layer | Driver removed from site. 3 modes with memory; high, medium (30%), low (5%). PWM frequency 3.9 kHz. Thermal and low voltage warnings. Bottom board apparently does nothing except provide a 21 mm board and can be removed to leave just a 19 mm single board boost driver, 10 mm high, with components on both sides. |
|
MultiLine PWM Dimmer |
Led-Tech $21.00 (approx) |
User interface driver | 7.0-30 V | 0 | 10 A |
1 | 138 mm x 16 mm x 20 mm (or 40 mm with knob) | PWM dimming only. Scroll bar design with a PWM frequency of 450 Hz giving 0-100% control of constant current or voltage supply - ie, needs to be used with a regulator. Short circuit protected. | ||
MultiLine PWM Dimmer with Potentiometer |
Led-Tech $19.00 (approx) |
Unspecified driver type | 7.0-30 V | 0 | 10 A |
1 | 50 mm x 35 mm x 25 mm | PWM dimming only. Scroll bar design with a PWM frequency of 450 Hz giving 0-100% control of constant current or voltage supply - ie, needs to be used with a regulator. Short circuit protected. Â The LT-1619 version has IR sensor and remote control. |
||
MultiLine PWM Dimmer, 3 channel |
Led-Tech $63.00 (approx) |
User interface driver | 7.0-30 V | 0 | 10 A |
1 | 138 mm x 52 mm x 20 mm (or 40 mm with knob) | PWM dimming only. Scroll bar design with a PWM frequency of 450 Hz giving 0-100% control of constant current or voltage supply - ie, needs to be used with a regulator. Short circuit protected. | ||
Nanjg 102, 1xAA boost |
FastTech $1.84 |
Boost driver | 0.9-1.5 V | 1 | 1x AA/AAA | 550 mA |
1 | 13 mm | Claimed output current of 550 mA does not fit with reviewer who says input current with an AAA Eneloop was 800 mA. | |
Nanjg 103, 1xAA boost |
FastTech $2.14 |
Boost driver | 0.9-1.5 V | 1 | 1x AA/AAA | 500 mA |
1 | 17 mm | Output voltage up to 4 V. | |
Nanjg 110 |
Intl Outdoor Store $2.85 |
Boost driver | 0.9-3.7 V | 1 | 1-2x AA 1x CR123A 1x LiFePO4 |
950 mA |
1 | 17 mm | Constant current output with 2*AA. About 450 mA with 1*AA. No polarity protection. | |
Nanjg 18 boost driver |
FastTech $3.87 |
Boost driver | 0.8-7.0 V | 1 | 3000 mA |
5 | 17 mm | 5 modes; high (100%), medium (30%), low (5%), SOS, strobe. Output voltage 2-7 V, manually set; possibly hence the mention of direct drive. Claimed output of 3 A is seriously dubious (it might actually be input current). See DX sku.7882 for more details on the Nanjg 18 driver. | ||
Nanjg 112A |
KaiDomain $4.74 each (down from $4.82 while it was sold out, down from $5.02), also available in 5 pack |
Boost driver and buck driver | 0.9-4.2 V | 1 | 1x Li-ion | 1000 mA |
5 | 17 mm | Unclear what it does when input voltage is greater than LED Vf - possibly just direct drive, but it claims to buck. Similar to Nanjg 28 but with contacts for different mode groups like AK-47; with a suitable switch you could change between groups with 2, 3, 3 and 5 modes on the fly. Output current with 1x AA claimed to be 300-500 mA. This review says the low and medium modes are very close together. Formerly product ID 10243. Also available as a 5 pack, S009114 (formerly product ID 10246). |
|
Nanjg 18 |
DealExtreme $4.26 |
Boost driver | 0.8-7.0 V | 1 | 1-2x NiMH | 60-91% | 1000 mA |
17 | 17 mm | Former version 19 mode Nanjg 16 (NJG-016) is the one pictured on DX. New version (NJG18) has the first mode group with just low, medium, high as detailed here. Previous version: 19 mode boost driver using "Seiko S-8352D (or a clone thereof)" (datasheet, PDF 528 KB) which is a constant voltage boost driver chip. User-adjustable output voltage (not current) ~2 V up to 7.4 V. Output voltage must be greater than input voltage; one report says it will keep working down to 0.3 V but will not turn on unless input voltage is at least 1.1 V. Note that it runs out of regulation, so is not a constant current or constant voltage driver. Capable of ~700 mA output from a single AA NiMH cell, or ~1000 mA from two. Efficiency in the 60-70% range if output is much over 1 W (running the board on 1x AA), and pushing 90% at ~1 W - amazing for an inexpensive boost driver. Do not operate without a load connected. Is it suitable for a Li-ion cell? See a good analysis here by Tido, who writes: "Yes and no. It's possible to use this circuit with a high Vf LED like an XR-E... Things are different with an XP-G..." Tip 1: To disable modes (and a mode list) see this post. Tip 2: A mod to get this driver to fit an Ultrafire A10 is detailed here. |
Nanjg 20 |
DealExtreme $6.46 for 3 |
Boost driver | 0.8-3.3 V (old version 1.5-4.2 V) |
1 | 41-86% | 970 mA |
1 | 17 mm (not 16 mm) | Boost driver (uses 2106F regulator chip). Reliable test data is hard to find and is complicated by people using different wiring methods. Some results are here and here but in the latter test, as pointed out, the output voltage dipping while the output current still climbs does seem a bit hard to believe. Discussion thread here. Tip 1: It seems that modifying the set resistor to give a lower output current (max 500 mA) is a good idea. Tip 2: Different wiring methods may give different efficiency figures. |
|
Nanjg 28 |
DealExtreme $4.99 |
Boost driver and linear regulator | 0.9-4.5 V | 1 | 1-3x AA (2x AA ideal), 1x Li-ion |
63-83% | 1000 mA |
5 | 17 mm | Recent buyers have reported problems with this driver. Buyer beware. Boost driver, possibly Seiko S-8352D boost chip. Uses PIC12F629 microcontroller chip for modes, probably with an AMC7136 (sic) linear regulator (datasheet, PDF 954 KB) for dropping small excess voltage as well. 5 modes: High (1,000 mA), mid (350 mA), low (50 mA), strobe (1,000 mA), SOS (1,000 mA). Testing here and here shows that above 2.4 V input the output current is surprisingly regulated. Average efficiency 70%. |
Nano Dim v2 Mini PWM Dimmer |
PCB Components $38.00 (approx) |
User interface driver | 3.5-24 V | 0 | 2500 mA |
1 | 18 mm | Up to 50 W power switching. Control with potentiometer or two buttons (0-100% stepless), or with a single button (three levels 25%, 50%, 100%, long press turns off). Selectable dimming frequency. | ||
nFlex |
TaskLED $30.00 + shipping |
Buck driver | 4.0-30 V | 1 | 85% | 1000 mA |
8 | 28 mm x 20.3 mm | Buck regulator. Constant current out 1000 mA (user reconfigurable, 350 mA default) at up to 25 V, uController UI. | |
Nitefire RGB LED strip controller |
DealExtreme $19.91 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
5 | 85 mm x 85 mm x 36 mm | 3 channel, maximum 4 A per channel. Touch panel control. | |
P-1X1W, 1W mains driver |
DealExtreme $2.20 |
Mains bulb driver | 85-265 V AC | 1 | 115 V or 230 V AC mains power | 300 mA |
1 | 23 mm 17 mm x 13 mm | The stated output voltage of 5 V is probably a maximum. At a guess, minimum voltage is probably around 2 V. | |
P-7X1W, 7.5W mains driver |
DealExtreme $4.70 |
Mains bulb driver | 85-265 V AC | 7 | 115 V or 230 V AC mains power | 300 mA |
1 | 40 mm x 17 mm x 14 mm | Output voltage 25 V (presumably this is about the centre of the output voltage range). This driver appears to be small enough for using for light bulbs. | |
P7 or MC-E driver |
KaiDomain $23.39 for 5 |
Unspecified driver type | 3.7-4.2 V | 1 | 1x Li-ion | 2800 mA |
3 | 17 mm (guess) | Three modes; high, low, strobe. Incomplete specs given. No inductor present so it's not a buck driver. Input voltage specs indicate it may be just a PWM driver. Formerly product ID 11074. |
|
P7 or MC-E driver, 3 mode |
KaiDomain $7.99 |
Buck driver | 5.5-12 V | 1 | 3000 mA |
3 | 19 mm | 3 modes; low (10%), medium (50%), high (100%). Formerly product ID 10973. |
||
PA30, 5-7x 1Â W (LF-G139A v1.1) |
DealExtreme $5.10 (down from $5.99) |
Mains driver | 85-265 V AC | 5-7 | 115Â V or 230Â V AC mains power | 86% | 320 mA |
1 | 42 mm x 42Â mm x 14Â mm | Transformer with buck regulator. Constant current out 320 mA @ 16-26 V. Some analysis of the driver is posted here. |
PA38, 9-12x 1 W |
DealExtreme $7.11 (formerly $8.23) |
Mains driver | 85-265 V AC | 9-12 | 115Â V or 230Â V AC mains power | 320 mA |
1 | 45 mm x 45Â mm x 29Â mm | Transformer with buck regulator. Constant current out 320 mA @ 27-42 V. | |
PAR30 7x1W |
KaiDomain $6.74 for 2 |
Mains driver | 85-265 V AC | 5-9 | 115 V or 230 V AC mains power | 350 mA |
1 | 60 mm x 48 mm x 18 mm | Nov 2011: Output voltage 15-28 V. Previously: This is a good example of what's wrong with KD. There are no specs given other than the product title, and that uses mAh instead of mA. It's just an assumption that it's for 110 V. Assumed suitable for 7 LEDs only. Formerly product ID 10941. |
|
PAR38 12x1W |
KaiDomain $6.95 for 2 |
Mains driver | 110-120 V AC | 12 | 350 mA |
1 | 65 mm x 56 mm x 24 mm | This is a great example of what is wrong with KD. There are no specs given except in the product title, and that uses mAh instead of mA. PAR38 bulbs are available for both 110 V and 230 V so it's just a guess that this driver is for 110 V. Formerly product ID 10942. |
||
Power Supply (adjustable) for 1-10x 1 W LEDs |
Led-Tech $35.00 (approx) |
Mains driver | 95-260 V AC | 1-10 | 115Â V or 230Â V mains power | 350 mA |
1 | 101 mm x 42 mm x 20 mm | Output can be adjusted using a potentiometer (not included). | |
Power Supply (adjustable) for 1-16x 1 W LEDs |
Led-Tech $42.00 (approx) |
Mains driver | 230-240 V AC | 1-16 | 230 V mains power | 350 mA |
1 | 110 mm x 52 mm x 24 mm | Two output channels, each 30 V, 10 W maximum. Output can be adjusted using a potentiometer (not included). IP20 housing. | |
Power Supply (adjustable) for 1-3x 3 W LEDs |
Led-Tech $35.00 (approx) |
Mains driver | 95-260 V AC | 1-3 | 115Â V or 230Â V mains power | 700 mA |
1 | 101 mm x 42 mm x 20 mm | Output can be adjusted using a potentiometer (not included). | |
Power Supply flexible for 350/700mA LEDs, 20W |
Led-Tech $35.00 (approx) |
Mains driver | 220-240 V AC | 1-8 | 230 V AC mains power | 700 mA |
2 | 111 mm x 56 mm x 25 mm | Can be switched to provide 350 mA or 700 mA constant current output, or various constant voltages from 4 V (5 W) to 24 V (20 W). IP20 housing. | |
PowerLine Constant Current Power Supply, |
Led-Tech $21.00 (approx) |
Linear regulator | 7.0-30 V (actual permitted V over total LED Vf varies) |
1-8 | 46-96% | 2800 mA |
1 | 63 mm x 21 mm x 33 mm | Linear regulator with a heatsink, available in six versions providing 350 mA, 700 mA, 1000 mA, 1.4 A, 2.0 A and 2.8 A. Large input voltage range (the minimum input voltage of 1 V is assumed) but input voltage must be at least 1 volt above output voltage and a maximum of 22, 13, 9, 7, 6 or 4 V above output voltage for the respective versions. The mention of PWM is believed to mean this driver can be used with a separate PWM driver, not that this driver uses PWM. Has thermal protection and output short circuit protection. Â Also available in SLIM versions which lack the heatsink and so have tighter input voltage tolerances. |
|
PowerLine SLIM Constant Current Power Supply, |
Led-Tech $18.00 (approx) |
Linear regulator | 1.0-30 V (actual permitted V over total LED Vf varies) |
1-8 | 63-96% | 2800 mA |
1 | 50 mm x 7 mm x 15 mm | Linear regulator, available in eight versions providing 180 mA, 350 mA, 500 mA, 700 mA, 1000 mA, 1.4 A, 2.0 A and 2.8 A. Large input voltage range (the minimum input voltage of 1 V is assumed) but input voltage must be at least 1 volt above output voltage and a maximum of 10, 10, 7, 5, 4, 3, 2.5 or 2 V above output voltage for the respective versions. The mention of PWM is believed to mean this driver can be used with a separate PWM driver, not that this driver uses PWM. Has thermal protection and output short circuit protection. Â Also available in non-SLIM versions which have a heatsink, allowing better heat dissipation and wider input voltage tolerance. |
|
PowerPuck |
LED Supply $17.99 + shipping |
Buck driver | 5.0-32 V | 1-6 | 86-95% | 1000 mA |
1 | 38 mm diameter (flanges 64 mm long) x 13 mm height | Input voltage must be at least 2 V higher than output voltage. Output has short circuit protection (15 seconds) and open circuit protection. Versions available with outputs of 350, 700 or 1,000 mA. | |
PS-SP12118, 5V 3A DC-DC Converter Board |
Sure Electronics $5.99 + shipping |
Step-down (non-buck) driver | 5.0-24 V | 0 | 12 V automotive | 3000 mA |
1 | 83 mm x 51 mm x 16 mm | This is a DC-DC converter using an LM2596 with a constant 5 V output, not a current controlled LED driver. The maximum output current is 3 A. | |
PT4115 MR16 driver |
FastTech $2.31 |
MR16 (buck) driver | 12-24 V DC; also works with AC | 3 | 12 V, 24 V DC; 12 V AC | 767 mA Can be modified to 1200 mA |
1 | 17 mm x 14 mm x 10 mm | Photos show PT4115 chip with SS24 Schottky diodes (including the rectifier). Sense resistors appear to be 1 Ω and 0.15 Ω in parallel. | |
PWM 5 mode driver |
KaiDomain $4.33 |
Unspecified driver type | 3.2-4.5 V | N/A | 3500 mA |
1 | 17 mm | Vague specifications given but from the test data given it's apparently PWM dimming only in which case this board does no current limiting but could be used in conjunction with other drivers that do. 5 modes; high, medium (45%), low (10%), strobe, SOS. Formerly product ID 1845. |
||
PX24506, RGB LED strip decoder |
DealExtreme $21.20 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 9 A |
1 | 86 mm x 52 mm x 19 mm | 3 channel, maximum 3 A per channel. | |
QH-40W18-36x1W mains driver |
DealExtreme $11.90 |
Mains driver | 85-277 V AC | 18-36 | 115 V or 230 V AC mains power | 350 mA |
1 | 115 mm x 45 mm x 28 mm | Output voltage 50-120 V. Note that this voltage represents a shock hazard - use with caution. | |
QuadPuck |
LED Supply $159.99 + shipping |
Buck driver | 8.0-32 V | 1-72 | 1100 mA |
1 | 110 mm x 64 mm x 25 (or 17) mm | Four channel driver (using four BuckPucks) with independent dimming (140-1100 mA) on each channel (thus up to 4400 mA total). Dimming controller (eg, PC) sold separately. PCB length 102 mm but two connectors hang over the end. | ||
R103-DB (black), 3 channel LED strip amplifier |
DealExtreme $3.23 |
User interface driver | 8.0-16 V | 1-4 | 12 V DC | 12 A |
1 | 162 mm x 13 mm x 10 mm | 3 channel, maximum 4 A per channel. | |
R103-DB (white), 3 channel LED strip amplifier |
DealExtreme $3.47 |
User interface driver | 8.0-16 V | 1-5 | 12 V DC | 12 A |
1 | 162 mm x 13 mm x 10 mm | 3 channel, maximum 4 A per channel. | |
Remora |
Sandwich Shoppe $9.00 + shipping |
User interface driver | 2.7-20 V | N/A |
|
4 | 19 mm across; roughly half of a round Shark sized board | User interface board for the various Shark drivers - not usable by itself. Available in two flavours - three mode Plain (low, medium, high) and four mode Special (with SOS). | ||
RGB dimmer |
DealExtreme $14.40 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 9 A |
1 | 130 mm x 41 mm x 40 mm | 3 channels, maximum 3 A per channel at 12 V. Each colour individually controlled with a lovely big knob. | |
RGB dimmer |
DealExtreme $14.40 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
14 | 130 mm x 41 mm x 40 mm | 3 channels, maximum 4 A per channel at 12 V. Buyer beware - description claims 4 A per channel but photos indicate only 3 A per channel. | |
RGB LED mains bulb dimmer |
DealExtreme $18.10 |
User interface driver | 90-230 V AC | N/A | 115 V or 230 V AC mains power | 20 A |
1 | 107 mm x 41 mm x 27 mm | Output voltage same as input voltage. 3 channel, maximum 500 mA per channel. The overview says 2 A (originally 20 A). RF remote control. | |
RGB LED mains driver |
DealExtreme $25.35 |
Mains driver | 85-265 V AC | 4-7 | 115 V or 230 V AC mains power | 320 mA |
1 | 107 mm x 49 mm x 25 mm | Output voltage 11-23 V (apparently). RF remote control. | |
RGB LED strip controller |
DealExtreme $6.90 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 200 mm x 12 mm x 4 mm | 3 channel, maximum 2 A per channel. Buyer beware - product photos indicate it can be used with 24 V but description (and querying) excludes it. IR remote control. Stated length appears to be overall length of cable. | |
RGB LED strip controller |
DealExtreme $16.20 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 24 A |
1 | 120 mm x 75 mm x 25 mm | 3 channel, maximum 8 A per channel. | |
RGB LED strip controller |
DealExtreme $11.70 |
User interface driver | 5.0-24 V | 1-6 | 5 V or 12 V or 24 V DC | 12 A |
1 | 180 mm x 14 mm x 8 mm | 3 channel, maximum 4 A per channel. RF remote control. Length is probably complete length of cable. | |
RGB LED strip controller |
DealExtreme $25.00 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
15 | 113 mm x 55 mm x 20 mm | 3 channel, maximum 6 A per channel. RF remote control (touch sensitive). | |
RGB LED strip controller |
DealExtreme $9.90 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V | 12 A |
1 | 170 mm x 13 mm x 6 mm | 3 channel, maximum 4 A per channel. RF remote control. Length is probably complete length of cable. | |
RGB LED strip controller |
DealExtreme $20.80 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
1 | 83 mm x 64 mm x 24 mm | 3 channel, maximum 6 A per channel. With RF touch remote control. | |
RGB LED strip controller |
DealExtreme $7.40 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 60 mm x 35 mm x 22 mm | 3 channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $8.10 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
4 | 60 mm x 35 mm x 22 mm | 3 channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $6.20 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 65 mm x 35 mm x 22 mm | Three channel controller, maximum 2 A per channel. 44 key IR remote control. | |
RGB LED strip controller |
DealExtreme $4.14 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 60 mm x 35 mm x 22 mm | Three channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $14.50 |
User interface driver | 12-24 V | 1-6 | 12 V DC | 18 A |
1 | 113 mm x 55 mm x 19 mm | Three channel, maximum 6 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $10.40 |
User interface driver | 5.0-24 V | 1-6 | 12 V DC | 12 A |
20 | 170 mm x 13 mm x 3 mm | Three channel, maximum 4 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $23.50 |
User interface driver | 12-24 V | 1-6 | 12 V DC | 18 A |
1 | 82 mm x 64 mm x 25 mm | Three channel, maximum 6 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $4.99 |
User interface driver | 12-24 V | 1-6 | 12 V DC | 12 A |
19 | 165 mm x 13 mm x 8 mm | 3 channel, maximum 4 A per channel. Apparently the description's 12 V is correct, not the photo's "12-24V" (which has been photoshopped out of the first photo). | |
RGB LED strip controller |
DealExtreme $25.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 9 A |
1 | 90 mm x 70 mm x 27 mm | 3 channel, maximum 3 A per channel; 216 W at 24 V. RF remote control. | |
RGB LED strip controller |
DealExtreme $28.30 |
User interface driver | 12-24 V | 1-6 | 12 V DC | 18 A |
1 | 83 mm x 65 mm x 24 mm | 3 channel, maximum 6 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $12.40 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 90 mm x 60 x 18 mm | 3 channel, maximum 4 A per channel. IR remote control. The size was formerly listed as 295 mm x 28 mm x 16 mm. Neither set of measurements really makes sense. | |
RGB LED strip controller |
DealExtreme $33.60 |
User interface driver | 12-24 V | N/A | 12 V or 24 V DC | 12 A |
1 | 99 mm x 84 mm x 25 mm | 3 channel, maximum 4 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $4.28 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
20 | 62 mm x 35 mm x 22 mm | 3 channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $11.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
N/A | 35 mm x 28 mm x 16 mm | 3 channel, maximum 4 A per channel. Channels have independent speed and brightness control. IP65 dust/water rated. | |
RGB LED strip controller |
DealExtreme $6.10 for 2 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
1 | 140 mm x 13 mm x 5 mm | 3 channel, maximum 4 A per channel. Length includes cables. | |
RGB LED strip controller |
DealExtreme $6.80 for 2 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
20 | 163 mm x 13 mm x 7 mm | 3 channel, maximum 4 A per channel. | |
RGB LED strip controller |
DealExtreme $6.80 for 2 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
20 | 160 mm x 13 mm x 8 mm | 3 channel, maximum current unknown, possibly 4 A per channel. | |
RGB LED strip controller |
DealExtreme $25.00 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
1 | 111 mm x 55 mm x 22 mm | 3 channels, maximum 6 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $6.20 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 60 mm x 34 mm x 22 mm | 3 channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $26.80 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V | 18 A |
1 | 127 mm x 41 mm x 32 mm | 3 channel, maximum 6 A per channel. RF touch panel remote control. | |
RGB LED strip controller |
DealExtreme $6.10 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
18 | 62 mm x 34 mm x 21 mm | 3 channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $14.20 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
11 | 80 mm x 53 mm x 26 mm | 3 channel, maximum 2 A per channel. | |
RGB LED strip controller |
DealExtreme $23.50 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
20 | 85 mm x 45 mm x 22 mm | 3 channel, maximum 6 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $14.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 6000 mA |
1 | 85 mm x 52 mm x 12 mm | 3 channel, maximum 2 A per channel. RF remote control. The claimed dimensions are probably incorrect. | |
RGB LED strip controller |
DealExtreme $25.70 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
1 | 84 mm x 80 mm x 34 mm | 3 channel, maximum 6 A per channel. RF touch panel remote control. | |
RGB LED strip controller |
DealExtreme $6.50 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 6000 mA |
21 | 125 mm x 56 mm x 7 mm | 3 channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $17.70 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 9 A |
1 | 43 mm x 35 mm x 9 mm | 3 channel, maximum 3 A per channel. Touch panel control. | |
RGB LED strip controller |
DealExtreme $28.40 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
1 | 90 mm x 70 mm x 27 mm | 3 channel, maximum 6 A per channel. RF touch control. | |
RGB LED strip controller |
DealExtreme $3.34 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V, 24 V DC | 6000 mA |
1 | 85 mm x 52 mm x 7 mm | 3 channel, maximum 2 A per channel. IR remote control. Stated size is probably the remote control. | |
RGB LED strip controller |
DealExtreme $11.50 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 160 mm x 13 mm x 11 mm | 3 channel, maximum 4 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $5.99 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 6000 mA |
1 | 84 mm x 52 mm x 6 mm | 3 channel, maximum 2 A per channel. IR remote control. The stated dimensions are probably the remote control. | |
RGB LED strip controller |
DealExtreme $6.70 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 6000 mA |
1 | 84 mm x 52 mm x 6 mm | 3 channel, maximum 2 A per channel. IR remote control. Stated dimensions appear to be the size of the remote control. | |
RGB LED strip controller |
DealExtreme $28.30 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 85 mm x 85 mm x 30 mm | 3 channel, maximum 4 A per channel. Touch control panel. | |
RGB LED strip controller |
DealExtreme $7.70 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 12 A |
21 | 87 mm x 40 mm x 7 mm | 3 channel, maximum 4 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $7.70 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V, or 24 V DC | 12 A |
21 | 87 mm x 40 mm x 7 mm | 3 channel, maximum 4 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $26.56 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 24 A |
1 | 125 mm x 48 mm x 25 mm | 3 channel, maximum 96 W per channel (eg, 8 A per channel at 12 V). IP67 dust/water rating. RF remote touch control. | |
RGB LED strip controller |
DealExtreme $9.47 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 12 A |
19 | 86 mm x 40 mm x 7 mm | 3 channel, maximum 12 A total. RF remote control. Stated size is apparently the remote control. | |
RGB LED strip controller |
DealExtreme $14.99 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 5000 mA |
1 | 110 mm x 56 mm x 33 mm | 3 channel, maximum 5 A total. IR remote control. | |
RGB LED strip controller |
DealExtreme $3.99 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 87 mm x 33 mm x 7 mm | 3 channel, apparently maximum 2 A per channel. IR remote control. Stated size is probably the remote control. | |
RGB LED strip controller |
DealExtreme $20.38 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
20 | 88 mm x 45 mm x 22 mm | 3 channel, maximum 6 A per channel. RF touch panel remote. | |
RGB LED strip controller |
DealExtreme $12.95 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 128 mm x 64 mm x 24 mm | 3 channel, maximum 4 A per channel. RF remote control. | |
RGB LED strip controller |
DealExtreme $5.19 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
4 | 62 mm x 35 mm x 22 mm | 2 output connectors. 3 channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $11.94 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 129 mm x 64 mm x 24 mm | 3 channel, maximum 4 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $7.99 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 2000 mA |
1 | 85 mm x 40 mm x 5 mm | 3 channel, maximum 2 A per channel. IR remote control. Stated dimensions appear to be the remote control. | |
RGB LED strip controller |
DealExtreme $6.97 for 5 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 6000 mA |
19 | 138 mm x 12 mm x 10 mm | 3 channel, maximum 2 A per channel. | |
RGB LED strip controller |
DealExtreme $2.42 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 6000 mA |
1 | 150 mm x 12 mm x 4 mm | Stated maximum current is presumed to be total for 3 channels. The stated length is probably the length of the cables. | |
RGB LED strip controller |
DealExtreme $3.26 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
20 | 41 mm x 13 mm x 4 mm | Three channel, maximum 4 A per channel. | |
RGB LED strip controller |
DealExtreme $4.12 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V, 24 V DC | 6000 mA |
1 | 85 mm x 52 mm x 8 mm | 3 channel, (apparently) maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
DealExtreme $3.89 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V, 24 V DC | 6000 mA |
1 | 124 mm x 55 mm x 7 mm | 3 channel, maximum 2 A per channel. 44 button IR remote control. Stated size is probably the remote control. Appears to be the same as DX sku.297886. | |
RGB LED strip controller |
DealExtreme $3.99 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V, 24 V DC | 6000 mA |
1 | 125 mm x 56 mm x 7 mm | 3 channel, maximum 2 A per channel. 44 button IR remote control. Stated size is probably the remote control. Appears to be the same as DX sku.294815. | |
RGB LED strip controller |
DealExtreme $5.81 for 5 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 6000 mA |
1 | 145 mm x 13 mm x 5 mm | 3 channel, maximum 2 A per channel. | |
RGB LED strip controller |
DealExtreme $24.99 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 18 A |
1 | 160 mm x 110 mm x 35 mm | 3 channel, maximum 6 A per channel. Touch panel RF remote control. | |
RGB LED strip controller |
DealExtreme $6.72 for 5 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 12 A |
19 | 45 mm x 13 mm x 6 mm | 3 channel, maximum 4 A per channel, maximum output power 144 W. | |
RGB LED strip controller |
DealExtreme $8.20 for 5 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 12 A |
19 | 45 mm x 13 mm x 5 mm | 3 channel, maximum 4 A per channel, maximum output power 144 W. | |
RGB LED strip controller |
DealExtreme $8.11 for 10 |
User interface driver | 12-12 V | 1-6 | 12 V DC | 6000 mA |
1 | 143 mm x 13 mm x 6 mm | 3 channel, apparently maximum 2 A per channel. Stated size probably includes the wires. | |
RGB LED strip controller |
DealExtreme $3.22 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 85 mm x 55 mm x 30 mm | 3 channel, apparently maximum 2 A per channel. | |
RGB LED strip controller |
FastTech $2.97 |
User interface driver | 5.0-24 V | 1-6 | USB, 12 V, 24 V DC | 12 A |
39 | 86 mm x 40 mm x 7 mm | 3 channel, maximum 4 A per channel. RF remote control. | |
RGB LED strip controller |
FastTech $2.33 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
39 | 85 mm x 50 mm x 7 mm | 3 channel, maximum 4 A per channel. IR remote control. | |
RGB LED strip controller |
FastTech $2.37 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
39 | 85 mm x 40 mm x 7 mm | 3 channels, maximum 4 A per channel. IR remote control. | |
RGB LED strip controller |
FastTech $3.07 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
4 | 85 mm x 52 mm x 7 mm | 3 channels, maximum 2 A per channel. IR remote control. | |
RGB LED strip controller |
FastTech $3.08 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
39 | 125 mm x 56 mm x 7 mm | 3 channels, maximum 4 A per channel. IR remote control. | |
RGB LED strip controller |
FastTech $3.12 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
39 | 125 mm x 56 mm x 7 mm | 3 channels, maximum 4 A per channel. IR remote control. | |
RGB LED strip controller |
FastTech $3.77 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 125 mm x 56 mm x 7 mm | 3 channels, maximum 4 A per channel. IR remote control. | |
RGB LED strip controller for mains voltage LED strips |
DealExtreme $17.70 |
User interface driver | 220-240 V AC | N/A | 230 V AC mains power |
|
1 | 100 mm x 59 mm x 56 mm | Output voltage same as input voltage. 3 channel, maximum 1000 W power switching. IR remote control. | |
RGB LED strip controller with 12V power supply |
DealExtreme $14.60 |
User interface driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 5000 mA |
1 | 110 mm x 55 mm x 33 mm | 3 channel, maximum 20 W (1.67 A) per channel. Includes 60 W power supply, output 12 V DC. IR remote control. | |
RGB LED Strip Controller with LED strip |
DealExtreme $25.20 |
User interface driver | 12-12 V | 1-3
255 LEDs included |
12 V DC | 6000 mA |
1 | Includes 5 m, 18 W LED strip and IR remote controller. | ||
RGB LED strip controller, high current switching |
DealExtreme $16.46 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V | 30 A |
1 | 110 mm x 90 mm x 25 mm | 3 channel, maximum 10 A per channel. No remote control. | |
RGB LED strip controller, high current switching |
DealExtreme $19.36 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 30 A |
1 | 110 mm x 90 mm x 25 mm | 3 channel, maximum 10 A per channel. RF remote control. | |
RGB LED strip controller, high current switching |
DealExtreme $27.76 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 24 A |
1 | 91 mm x 90 mm x 25 mm | 3 channel, maximum 8 A per channel. Touch control panel. | |
RGB LED strip controller, mains powered |
DealExtreme $35.90 |
User interface driver | 110-240 V AC | 1-3 | 115 V or 230 V AC mains power | 6000 mA |
1 | 126 mm x 68 mm x 19 mm | Output voltage 12 V. 3 channels, maximum output 2 A per channel. RF remote control. | |
RGB LED strip controller, mains powered |
DealExtreme $20.40 |
User interface driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 6000 mA |
1 | 149 mm x 55 mm x 36 mm | 3 channel, maximum 2 A per channel. Mains powered, output voltage 12 V DC. IR remote control. | |
RGB LED strip controller, mains powered |
DealExtreme $15.10 |
User interface driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 5000 mA |
1 | 110 mm x 56 mm x 34 mm | 3 channel, maximum output 5 A total. Output voltage of mains adapter 12 V. | |
RGB LED strip controller, mains powered |
DealExtreme $22.70 |
User interface driver | 85-265 V AC | 1-3 | 115 V or 230 V AC mains power | 6000 mA |
1 | 149 mm x 55 mm x 33 mm | Output voltage 12 V. 3 channel, maximum current 2 A per channel. IR remote control. | |
RGB LED strip controller, RF201 |
DealExtreme $31.70 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V or 24 V DC | 24 A |
1 | 120 mm x 86 mm x 27 mm | 3 channel, maximum 8 A per channel. RF touch panel remote control. | |
RGB LED strip controller, sound controlled |
DealExtreme $29.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 170 mm x 85 mm x 25 mm | 3 channels, maximum 4 A per channel, activated by sound or voice. IR remote control. | |
RGB LED strip dimmer |
DealExtreme $7.60 |
User interface driver | 12-12 V | 1-3 | 2000 mA |
1 | 49 mm x 32 mm x 23 mm | 3 channel. Maximum 2 A per channel. The dimensions originally given (83 mm x 50 mm x 7 mm) were probably for the IR remote control. | ||
RGB LED strip music controller |
DealExtreme $28.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 85 mm x 84 mm x 25 mm | 3 channel, maximum 4 A per channel. IR remote control. | |
RGB LED strip music controller |
DealExtreme $11.90 |
User interface driver | 12-24 V | 1-6 | 12 V DC | 6000 mA |
14 | 62 mm x 35 mm x 22 mm | 3 channel, maximum 2 A per channel. IR remote control. | |
RGB LED strip music controller |
DealExtreme $17.10 |
User interface driver | 12-12 V | N/A | 12 V DC | 12 A |
1 | 83 mm x 83 mm x 24 mm | 3 channel music triggered, maximum 4 A per channel. IR remote control. | |
RGB LED strip music controller |
DealExtreme $26.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
21 | 165 mm x 86 mm x 26 mm | 3 channel, maximum 6 A per channel. IR remote control. | |
RGB LED strip music controller |
DealExtreme $41.90 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
1 | 164 mm x 96 mm x 25 mm | 3 channel, maximum 6 A per channel.IR remote control. | |
RGB LED strip music controller |
DealExtreme $20.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 140 mm x 86 mm x 26 mm | 3 channel, maximum 4 A per channel. IR remote control. | |
RGB LED strip music controller |
DealExtreme $19.00 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 134 mm x 64 mm x 24 mm | 3 channel, maximum 4 A per channel. RF remote control. | |
RGB LED strip music controller |
DealExtreme $10.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 6000 mA |
1 | 50 mm x 35 mm x 22 mm | 3 channel, maximum 2 A per channel. Music triggered. RF remote control. | |
RGB LED strip music controller |
DealExtreme $14.60 |
User interface driver | 9-16 V | 1-3 | 12 V DC | 12 A |
3 | 107 mm x 60 mm x 25 mm | 3 channel, maximum 4 A per channel. | |
RGB LED strip music controller |
DealExtreme $37.92 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
20 | 100 mm x 85 mm x 26 mm | Two sets of 3 channel outputs, maximum 6 A per channel. RF remote control. | |
RGB LED strip music controller |
DealExtreme $31.87 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 84 mm x 84 mm x 24 mm | 3 channel, maximum 4 A per channel. RF touch panel remote control. | |
RGB LED strip music controller |
DealExtreme $9.38 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 6000 mA |
1 | 63 mm x 35 mm x 22 mm | 3 channel, maximum 2A per channel. IR remote control. Note - the supplier has said it is OK with 24 V, even though the item label only says 12 V. | |
RGB LED strip music controller |
DealExtreme $13.24 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 100 mm x 45 mm x 25 mm | 3 channel, maximum 4 A per channel. IR remote control. | |
RGB LED strip programmable controller |
DealExtreme $18.40 |
User interface driver | 12-12 V | 1-3 | 12 V DC |
|
1 | 93 mm x 57 mm x 25 mm | Unknown current handling; apparently requires a particular kind of LED strip. RF remote control. | |
RGB LED strip signal amplifier |
DealExtreme $16.50 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 95 mm x 52 mm x 30 mm | 3 channels, maximum 4 A per channel at 12 V. 12 V and RGB input, RGB output. Buyer beware - description claims 24 V input but photos indicate only 12 V input. | |
RGB LED strip signal amplifier |
DealExtreme $15.00 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
1 | 112 mm x 62 mm x 22 mm | 3 channels, maximum 4 A per channel. | |
RGB LED strip signal amplifier |
DealExtreme $5.55 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
1 | 43 mm x 13 mm x 5 mm | 3 channel, maximum 4 A per channel. | |
RGB LED strip signal amplifier |
DealExtreme $7.90 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
1 | 95 mm x 45 mm x 22 mm | 3 channel, maximum 4 A per channel. | |
RGB LED strip signal amplifier |
DealExtreme $2.28 |
User interface driver | 8.0-16 V | 1-3 | 12 V DC | 12 A |
1 | 162 mm x 13 mm x 6 mm | 3 channel amplifier, maximum 4 A per channel. | |
RGB LED strip signal amplifier |
DealExtreme $7.40 for 2 |
User interface driver | 8.0-16 V | 1-3 | 12 V DC | 12 A |
1 | 33 mm x 13 mm x 6 mm | 3 channel, maximum 4 A per channel. The stated length of 130 mm presumably includes the attached cable; I am assured they are 33 mm long. | |
RGB LED strip signal amplifier |
DealExtreme $6.20 for 2 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
1 | 163 mm x 12 mm x 10 mm | 3 channel, maximum 4 A per channel. | |
RGB LED strip signal amplifier |
DealExtreme $12.00 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
1 | 80 mm x 72 mm x 34 mm | 3 channel, maximum 6 A per channel. | |
RGB LED strip signal amplifier |
DealExtreme $5.91 |
Unspecified driver type | 5.0-24 V | 1-6 | 5 V, 12 V, 24 V DC | 12 A |
1 | 90 mm x 45 mm x 18 mm | 3 channel, maximum 4 A per channel. | |
RGB LED strip touch controller |
DealExtreme $24.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
4 | 120 mm x 74 mm x 42 mm | 3 channel, maximum 4 A per channel. | |
RGB LED strip touch controller |
DealExtreme $23.28 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
1 | 110 mm x 40 mm x 30 mm | 3 channel, maximum 6 A per channel. RF remote touch controller. | |
RGB Light Strip Controller |
DealExtreme $16.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 130 mm x 64 mm x 24 mm | 3 channels, maximum 4 A per channel. RF remote control. | |
RGB Light Strip Controller w wireless touch panel remote |
DealExtreme $33.90 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 15 A |
1 | 112 mm x 56 mm x 16 mm | 3 channels, maximum (apparently) 5 A per channel at 12 V, or 3 A per channel at 24 V. RF remote control. | |
RGB touch panel LED strip controller |
DealExtreme $19.13 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
1 | 84 mm x 82 mm x 33 mm | 3 channel, maximum 6 A per channel. RF touch panel remote. | |
RGB WiFi LED strip dimmer |
DealExtreme $33.63 |
Buck driver | N/A | 1-6 | 12 V or 24 V DC | 9 A |
15 | 96 mm x 57 mm x 25 mm | Three channel, maximum 3 A per channel. WiFi controllable using a cellphone. | |
RGBW (4ch) LED strip controller |
DealExtreme $15.69 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 16 A |
1 | 86 mm x 86 mm x 32 mm | 4 channel, maximum 4 A per channel. Touch panel controller. | |
RGBW LED strip controller |
DealExtreme $23.55 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 16 A |
1 | 76 mm x 59 mm x 22 mm | 4 channel, maximum 4 A per channel. | |
RH-808, RGB controller and LEDs |
DealExtreme $17.30 |
Step-down (non-buck) driver | 12-14.5 V | 1-4
4 LEDs included |
12 V automotive | 125 mA |
4 | 27 mm x 27 mm x 30 mm | Unknown regulation method. Output power 1.5 W; output current listed in this table is assumed total. Stated dimensions are probably for each LED housing. 4 white LEDs included (in 4 water resistant housings). |
|
RH-809, RGB controller and LEDs |
DealExtreme $18.30 |
Step-down (non-buck) driver | 12-14.5 V | 9
36 LEDs included |
12 V automotive | 125 mA |
15 | 115 mm x 14 mm x 12 mm | RGB controller; regulation unknown, could be simple resistors. Output power 1.5 W; output current listed in this table is assumed total. Includes RF remote control. 12 red LEDs, 12 green LEDs, 12 blue LEDs included (in 4 water resistant housings). |
|
RT-T1 single channel LED dimmer |
DealExtreme $12.50 |
User interface driver | 5.0-24 V | 1-6 | 5 V or 12 V or 24 V DC |
8 A |
1 | 105 mm x 53 mm x 32 mm | Single channel, up to 8 A. Maximum power handling 40 W at 5 V, 96 W at 12 V, 192 W at 24 V. | |
S-05330A |
DealExtreme $10.10 |
Mains driver | 220-240 V AC (*) |
1
1 LED included |
115 V or 230 V AC mains power * | 330 mA |
1 | * Unclear if compatible with 110-120 V AC operation; driver label claims universal mains voltage input, description only mentions 220V. Output voltage 3-5 V. 1 white LED included (in a fancy aluminium holder). |
||
S-05660A 220V |
DealExtreme $12.60 |
Mains driver | 220-240 V AC | 1
1 LED included |
230 V AC mains power | 330 mA |
1 | Output current 310-350 mA, output voltage 3-5 V. 1 cool white LED included (in a fancy black and red holder). |
||
S-26330 |
DealExtreme $17.30 |
Mains driver | 110-265 V AC | 4-7
5 LEDs included |
115 V AC or 230 V AC | 330 mA |
1 | Output voltage 12-26 V. 5 warm white LEDs included (in an aluminium downlight). |
||
SAMDI (1-3)*1W mains driver |
DealExtreme $3.52 for 2 |
Mains driver | 85-265 V AC | 1-3 | 115Â V, 230Â V AC mains power | 280 mA |
1 | 67 mm x 32 mm x 21 mm | Output voltage 6-12 V. Markings are inconsistent. Label indicates suitable for 1-3 LEDs but output voltage range implies 2-3 (or maybe 4) LEDs. | |
SAMDI (12-18)*1W mains driver |
DealExtreme $5.17 for 2 |
Mains driver | 85-265 V AC | 12-18 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 87 mm x 36 mm x 22 mm | Output voltage 36-63 V. | |
SAMDI (12-18)*1W mains driver |
DealExtreme $4.85 |
Mains driver | 85-265 V AC | 12-18 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 87 mm x 28 mm x 24 mm | Output voltage 30-60 V. IP66 dust/water rating. | |
SAMDI (18-24)*1W mains driver |
DealExtreme $6.20 for 2 |
Mains driver | 100-260 V AC | 18-24 | 115Â V, 230Â V AC mains power | 280 mA |
1 | 87 mm x 37 mm x 22 mm | Output voltage 63-85 V. | |
SAMDI (18-25)*1W mains driver |
DealExtreme $5.99 |
Mains driver | 85-265 V AC | 18-25 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 90 mm x 30 mm x 23 mm | Output voltage 60-90 V. IP66 dust/water rating. | |
SAMDI (25-36)*1W mains driver |
DealExtreme $6.91 |
Mains driver | 85-265 V AC | 25-36 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 100 mm x 30 mm x 22 mm | Output voltage 80-120 V. IP66 dust/water resistance. | |
SAMDI (4-7)*1W mains driver |
DealExtreme $3.52 for 2 |
Mains driver | 85-265 V AC | 4-7 | 115Â V, 230Â V AC mains power | 280 mA |
1 | 67 mm x 32 mm x 21 mm | Output voltage 12-28 V. | |
SAMDI HY3-5W, (3-5)*1W mains driver |
DealExtreme $2.52 |
Mains driver | 85-265 V AC | 3-5 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 47 mm x 24 mm x 18 mm | Output voltage 8-18 V. IP66 dust/water rating. | |
SAMDI HY4-7W, (4-7)*1W mains driver |
DealExtreme $3.30 |
Mains driver | 85-265 V AC | 4-7 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 66 mm x 24 mm x 20 mm | Output voltage 12-27 V. IP66 dust/water resistance. | |
SAMDI HY8-12W, (8-12)*1W mains driver |
DealExtreme $3.61 |
Mains driver | 85-265 V AC | 8-12 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 67 mm x 25 mm x 20 mm | Output voltage 20-40 V. IP66 dust/water rating. | |
SD12-1A, 1 A buck driver |
KaiDomain $2.99 |
Buck driver | 3.0-12 V | 1 | 1000 mA |
1 | 17 mm | The driver chip shown in the photo is the discontinued PT4105. Formerly product ID 9910. |
||
Seoul P7 3-mode UI Driver board |
e-lectronics.net $12.25 + shipping |
Buck driver | 5.5-12 V | 1 | 2x Li-ion | 76-83% | 3000 mA |
3 | 17 mm double sided board | Driver has vanished from site. Buck driver using PWM for modes. Three modes; low (5%), medium (35%) and high (100%), includes mode memory. Not constant current (the output changes with input voltage) but is claimed to push a SSC P7 "very hard" and thus needs good heatsinking. Thermal protection may have been removed in the latest version. Appears to be the same as KD sku S005296. |
Seoul P7 5-mode UI Driver board |
e-lectronics.net $5.99 + shipping |
Buck driver | 3.2-4.5 V | 1 | 1x Li-ion | 2380 mA |
5 | 17 mm | Stupidly, this driver completely vanishes from the retailer's web site when temporarily out of stock. Buck driver using PWM for modes. Modes are high (100%), medium (45%), low (10%), strobe, SOS. Includes mode memory. The claimed output appears very unregulated, with a fresh Li-ion giving 2.38 A, and dropping to just 1.1 A. |
|
Shark |
Sandwich Shoppe $20.00 + shipping |
Boost driver | 2.7-20 V | 1-5 | "Great for use in Mag C & D." | 77-93% | 980 mA |
1 | 19 mm | This product has vanished from the retailer's web site. Boost regulator, although Wayne says "The Shark has a hard time at voltages below ~4V". Vin must be less than Vout, and should be >1/3 Vout (preferably >1/2 Vout). Maximum input current 4 A, efficient up to 2 A. Regulates on voltage or current, output current adjustable from 50-980 mA (or greater by changing set resistor, although that would remove load protection) at maximum 26 V. Open circuit protected. Some questions are answered in this forum thread. Â Shark vs MaxFlex forum thread. |
Shark Buck |
Sandwich Shoppe $27.00 + shipping |
Buck driver | 5.0-15 V | 1-3 | 75-79% | 3000 mA |
1 | 19 mm | Three versions available (different set resistors), with output current set to 1 A, 2 A and 3 A. For some strange reason complete specifications are not readily available but some more information is available in this thread, where Wayne says you can drive "maybe 4" LEDs. (I can't see any explanation why the efficiency graph shows values 2% higher than the table.) | |
Single channel LED strip controller |
DealExtreme $8.19 for 10 |
User interface driver | 12-12 V | 1-6 | 12 V DC | 6000 mA |
1 | 44 mm x 13 mm x 5 mm | Single channel, maximum 6 A. | |
Single channel LED strip controller |
DealExtreme $3.29 |
User interface driver | 12-12 V | 1-6 | 12 V DC | 12 A |
5 | 308 mm x 13 mm x 8 mm | Single channel, maximum 12 A. Coaxial DC connector on each end. Stated size is probably length of cable. | |
Single channel LED strip controller |
DealExtreme $2.69 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 12 A |
5 | 257 mm x 13 mm x 5 mm | Single channel, maximum 12 A. Length is evidently the length of the cable. | |
Single channel LED strip dimmer |
DealExtreme $9.20 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 89 mm x 60 mm x 36 mm | 1 channel, maximum output 8 A. Touch panel control. | |
Single channel LED strip dimmer |
DealExtreme $8.50 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 105 mm x 56 mm x 33 mm | RF remote control. | |
Single channel LED strip dimmer |
DealExtreme $6.30 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 63 mm x 35 mm x 22 mm | Single channel dimmer, maximum 6 A. IR remote control. Buyer beware - many details appear to be wrong. | |
Single channel LED strip dimmer |
DealExtreme $7.79 |
User interface driver | 12-24 V | 1-6 | 12 V, 24 V DC | 2000 mA |
1 | 475 mm x 34 mm x 33 mm | Buyer beware - specs are contradictory. Output current probably only 2 A. | |
SLCB-4A0 |
DealExtreme $16.00 |
User interface driver | 12-24 V | 1-6 | 4000 mA |
3 | 38 mm x 28 mm x 16 mm | Presumed to be a PWM controller for RGB LED strips which have current limiting resistors built in. 3 channel, output current maximum 4A per channel. 3 modes; smooth flow, strobe, fading. Blue anodised aluminium box, claimed to be waterproof (no IP rating given). IR remote control included. | ||
SLCB-4A0, RGB LED strip controller |
DealExtreme $8.72 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 52 mm x 28 mm x 16 mm | 3 channel, maximum 4 A per channel. IR remote control. | |
SLCB-4A0W |
DealExtreme $16.00 |
User interface driver | 12-24 V | 1-6 | 4000 mA |
5 | 38 mm x 28 mm x 16 mm | Presumed to be a PWM controller for warm white/cool white 3258 LED strips which have current limiting resistors built in, with the idea apparently being to select the overall tint. 2 channel, output current maximum 4A per channel. Adjustable brightness; 20%, 40%, 60%, 80%, 100%. Golden anodised aluminium box, claimed to be waterproof (no IP rating given). IR remote control included. | ||
SLRP-4A0 |
DealExtreme $15.70 |
User interface driver | 5.0-24 V | 1-6 | 12 A |
1 | 38 mm x 28 mm x 16 mm | Repeater for RGB or single colour LED controllers. Hot pink anodised aluminium box. | ||
SLZ-220V8-12x1W |
DealExtreme $7.82 for 5 |
Mains bulb driver | 100-240 V AC | 8-12 | 115Â V, 230Â V AC mains power | 300 mA |
1 | 36 mm x 17 mm x 16 mm | Output voltage 24-40 V. | |
SOB |
Sandwich Shoppe $18.00 - $20.00 + shipping |
Buck driver | 3.0-16 V | 1 | 75-85% | 1000 mA |
1 | 14 mm | Buck regulator. Constant current output, board available as a "blank" (add one or two SMT set resistors), or preset to 400 mA, 500 mA, 750 mA, 917 mA, or 1000 mA. DD when Vin less than Vf. Has thermal protection. | |
SP9301 1*3W RGB LED Driver |
Focalprice $7.81 |
Mains bulb driver | 85-265 V AC | 1 | 115 V or 230 V AC mains voltage | 75% | 300 mA |
1 | 32 mm x 20 mm x 13 mm | Output voltage 3.0-3.6 V. Output current stated to be 300/600 mA. IR remote control. Appears to be a mains driver with three output wires (red=positive, white=negative, black=???), probably used to supply an RGB driver board. It is stated to be compatible with ES27/GU10 bulbs. |
SP9301, 3*1W RGB LED Driver |
Focalprice $5.92 |
MR16 (buck) driver | 12-12 V | 1 | 75% | 300 mA |
1 | 30 mm x 20 mm x 13 mm | Output voltage 3.0-3.6 V. Output current stated to be 300/600 mA. This is a strange one. An MR16 driver with three wires (red=positive, white=negative, black=???) is pictured as well as a driver board with empty spaces for red, green and blue LEDs. It is stated to be compatible with MR16 bulbs but apparently requires 12 V DC input. My best guess is that the MR16 driver is a constant voltage supply for a linear regulator RGB driver (AMC7135 with PWM?). |
|
SPD10610 mains power supply |
DealExtreme $24.50 |
Mains driver | 100-240 V AC | 1-3 | 115 V or 230 V AC mains power | 600 mA |
1 | 90 mm x 37 mm x 25 mm | 12 V power supply. IP67 dust/water rating. Formerly LZ220V 20W, (8-12)x2W mains driver. Output voltage 25-45 V. IP67 dust/water rating. |
|
CPF member $35.00 (approx) |
Buck driver | 4.2-20 V | 1 | 2800 mA |
6 | 25 mm x 11 mm high | Available directly from a CPF member. There is a single mode version (€20), a 4-mode version (100%, 70%, 25%, 3%) and a 6 mode version (as 4 mode plus Fade in/out, Strobe). External momentary switch needed to change modes, not included. Sadly the specs are not all in one place, but it appears it may be able to cope with more than one LED, has a mode memory, and has a typical efficiency of about 85%. | |||
SST-50 5 mode |
KaiDomain $10.12 |
Buck driver | 5.0-12 V | 1 | 59% | 3280 mA |
1 | 23 mm - two boards in double layer | 5 modes; high, medium (~50%), low (~5%), strobe, SOS. Comes with a warning about the heat. One poster points out it looks very much like KD sku.S007542. Another poster's test results are the source of the mode output percentages, and has maximum output just 3.28 A instead of the claimed 5 A. That poster may also have been saying he could only get 3 seconds on high mode before thermal protection cut in. Buyer beware. Some efficiency test results are posted here (with a 4.93 A output current). Formerly product ID 10653. |
|
SST-90 9A, 5 mode |
KaiDomain $23.25 |
Buck driver | 6.0-12 V | 1 | 9 A |
5 | 26 mm | 5 modes; high, medium, low, strobe, SOS. Output current claimed to be a maximum of 9 A, implying either it's not well regulated or there's a bit of variability between drivers. Formerly product ID 11409. |
||
SST90 9A, 3 mode |
KaiDomain $23.25 |
Buck driver | 6.0-12 V | 1 | 9 A |
3 | 37 mm | 3 modes; high, middle, low - no flashing modes! Output current claimed to be a maximum of 9 A, implying either it's not well regulated or there's a bit of variability between drivers. Formerly product ID 11408. |
||
SZXDY01, 5 mode driver |
DealExtreme $4.19 |
User interface driver | 3.0-4.5 V | 1 | 1x Li-ion, 3x AA |
1000 mA |
5 | 17 mm | Unknown regulation method. 5 mode with memory; high, medium, low, strobe, SOS. | |
SZXDY03 |
DealExtreme $6.40 |
Buck driver | 12-16 V | 1-3 | 2200 mA |
5 | 25 mm x 25 mm x 11 mm | 5 mode; high, medium, low, fast strobe, SOS. Square board. | ||
TDC03 II, 2 channel LED strip controller |
DealExtreme $26.50 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 153 mm x 40 mm x 28 mm | 2 channels, maximum 6 A per channel. RF remote control. | |
TDC03 II, 2 channel LED strip controller |
DealExtreme $26.10 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 152 mm x 40 mm x 28 mm | 2 channels, maximum 6 A per channel. RF remote control. | |
TDC03, 2 channel LED strip dimmer |
DealExtreme $22.23 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 153 mm x 41 mm x 29 mm | 2 channel, maximum 6 A per channel at 12 V, 5 A per channel at 24 V. RF touch control. | |
TDL-2024, LED strip PIR switch |
DealExtreme $6.61 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V, 24 V DC | 4000 mA |
1 | 55 mm x 20 mm x 15 mm | 1 channel, maximum 4 A. Switching by PIR (passive infrared). Length is a guess. Does not seem to have any adjustment of PIR sensitivity, background light sensitivity or 'on' duration. | |
TG110V, 4x1W dimmable mains driver |
DealExtreme $6.31 for 5 |
Mains bulb driver | 110-120 V AC | 4 | 115Â V AC mains power | 80% | 300 mA |
1 | 24 mm x 18 mm x 11 mm | Output voltage 12-14 V. Dimmable. |
TM04, single LED strip dimmer (black) |
DealExtreme $23.70 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 87 mm x 86 mm x 36 mm | 1 channel, maximum output 8 A. Touch panel control. | |
TM06 LED strip dimmer (black) |
DealExtreme $24.60 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 87 mm x 86 mm x 35 mm | 1 channel, maximum 8 A. Touch panel controller. | |
TM06 LED strip dimmer (white) |
DealExtreme $22.20 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 87 mm x 86 mm x 35 mm | 1 channel, maximum 8 A. Touch panel controller. | |
TM07, RGB LED strip controller |
DealExtreme $23.50 |
User interface driver | 12-24 V | 1-3 | 12 V or 24 V DC | 12 A |
1 | 87 mm x 86 mm x 15 mm | 3 channel, maximum 4 A per channel. Touch panel controller. | |
TM08, RGB LED strip controller |
DealExtreme $18.56 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 86 mm x 86 mm x 36 mm | 3 channels, maximum 4 A per channel. Touch panel control. | |
TM08, RGB LED strip controller (black) |
DealExtreme $27.90 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 87 mm x 86 mm x 35 mm | 3 channel, maximum 4 A per channel. Touch panel controller (black). | |
TM08, RGB LED strip controller (white) |
DealExtreme $26.00 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 86 mm x 86 mm x 35 mm | 3 channel, maximum 4 A per channel. Touch panel controller (white). | |
TM08E2, RGB LED strip controller |
DealExtreme $19.99 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 80 mm x 80 mm x 42 mm | 3 channel, maximum 4 A per channel. Touch panel control. | |
TM08RGBW, 4 channel, RGBW LED strip controller |
DealExtreme $19.95 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC mains power | 16 A |
1 | 86 mm x 86 mm x 35 mm | 4 channel, maximum 4 A per channel. Touch panel controller. | |
TP001, RGB LED strip controller |
DealExtreme $30.70 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
14 | 86 mm x 86 mm x 40 mm | 3 channels, maximum 4 A per channel. | |
TP003, RGB LED strip controller |
DealExtreme $28.80 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
14 | 86 mm x 86 mm x 37 mm | 3 channels, maximum 4 A per channel. Power consumption <1 W. | |
TP005, RGB LED strip controller |
DealExtreme $26.90 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 86 mm x 86 mm x 37 mm | 3 channels, maximum 4A per channel. | |
TP006, single channel LED strip controller |
DealExtreme $26.90 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 8 A |
1 | 87 mm x 84 mm x 35 mm | Single channel, maximum 8 A. Touch panel interface. | |
TR-001 buck driver |
FastTech $5.44 |
Buck driver | 6.0-8.4 V | 1 | 2x Li-ion | 2200 mA |
1 | 17 mm | Buck driver, not a linear regulator as claimed. 5 mode; high, medium, low, strobe, SOS. Test data shows steady 2.2 A, not the claimed 2.4 A. However, the test data is rather dodgy - if tested even with a low Vf LED like an XM-L the driver would be up to 168% efficient - buyer beware. It seems like a pretty good driver but the current drawn will be considerably higher than indicated. | |
TR-0021B |
DealExtreme $2.48 |
Buck driver | 3.6-16 V | 1-4 | 80-95% | 1250 mA Can be modified to 2500 mA |
1 | 17 mm | April 2011: AX2002 driver chip used again (which has a minimum input voltage of 3.6V in its specs), with SS34 Schottky diode and 0.2 ohm sense resistor. (Add 1 ohm resistor in parallel to increase output to 1.5 A.) The input capacitor is said to be only rated for 16 V. Red board. Or green board (my very next order just after getting a red board). See AX2002 footnotes for using as a voltage regulator. November 2010: This driver may have changed again, with the YB1682 voltage regulator chip being used. Not good. Previous version (Feb 2010): Regulator chip AX2002 with 0.2 ohm sense resistor gives output 1.25 A, and the SS34 Schottky diode is great if you want to bump up the output current. DX's description claims it provides different current outputs (1-1.2 A) to different Cree efficacy bins. I think NOT. Tests with the previous version showed a constant 1.10 A, which was very close to the theoretical 1.13 A of an AX2002 with the then 0.22 ohm set resistor. When multiple drivers are used in parallel the efficiency apparently drops, probably because one driver is doing most of the work (and so gets quite hot). Hence, these drivers should probably not be run in parallel. Every so often the regulator chip changes, and in the case of the AX2002 had its identifying marks removed. This is quite frankly silly, as DX's customers went through another round of not only figuring out what the specs for the board were, but working out what the new chip was as well, before they could figure out the board's specs. The driver chip was suspected by some to be MC34063A (not an obvious choice by any means as the chip isn't pushed as an LED driver and the claimed similarity to a certain reference design doesn't exist), YB1682 (has a different reference design - not surprising because it's a voltage regulator not a constant current driver), PT4105 (unlikely because production of that chip was terminated before this board was listed), PT4115 (unlikely because of reported working voltage range) or AX2002 (perhaps most likely; the board appears to be the reference design except for choice of some components, and my chip has part of an A still showing). Tip 1: The output current can be increased (or decreased) by changing the set resistor appropriately: I(LED)=0.25V/Rsense. The diode in the product pic is a Schottky SS24, which has a maximum current limit of 2 A, but as of Feb 2010 are shipped with a Schottky SS34, with a 3 A limit. The AX2002 driver chip has a 2.5 A limit and gets very hot over 2 A. Tip 2: Maximum efficiency is achieved when running multiple LEDs from one driver with just a few excess volts (eg, 4 LEDs with 5 Li-ion). |
|
TR-0022b, 3-mode no memory |
DealExtreme $2.75 |
Buck driver | 3.0-12 V (3-8.4 V claimed) |
1 | 80-88% | 1100 mA |
3 | 17 mm - two boards in double layer | Buyer beware. Unknown regulation method, assumed to be buck because of input voltage range, which is listed as two different ranges in the title and description. Conflicting specs. Driver chip is marked LEDA 0712 (Vsense probably 0.25 V), with Schottky diode SS34. Three modes (presumably using PWM); claimed high 800±50 mA but tested to be 1100 mA, low 200±20 mA, fast strobe claimed 400±50 mA. Output current may vary by battery voltage. Efficiency improves from 80% to 88% if sense resistor is changed to lower the output current. Although specified for use up to 8.4V it apparently works with 12 V with 2 LEDs (simulated) and the efficiency can be increased to 90% at 1 A output with a mod. Claims to provide different current outputs (1-1.2 A) to different Cree efficacy bins. I think NOT. Also claimed 0.8 A output. Buyer beware. |
|
TR-0022b, 5-mode no memory |
DealExtreme $3.23 |
Buck driver | 3.0-8.4 V | 1 | 1-2x Li-ion | 80% | 1200 mA |
5 | 17 mm | April 2015. Photos have been changed - buyer beware. No longer two boards in double layer. Purchasers in April 2010 reported receiving a 3 mode board (compare with DX sku.26111) - buyer beware. Unknown regulation method, assumed to be buck because of input voltage range. 5 modes (presumably using PWM), high 1200±100 mA, mid 550±50 mA, low 100±10 mA, fast strobe 650±50 mA, SOS 1200±100 mA.  Claims to provide different current outputs (1-1.2 A) to different Cree efficacy bins. I think NOT. |
TR-0022b-like, |
DealExtreme $3.36 |
Buck driver | 3.0-8.4 V | 1 | 72-90% | 1200 mA |
3 | 17 mm - two boards in double layer | A board purchased in March 2010 reported to be 5 mode and with a maximum output current 800-950 mA (compare with DX sku.26107) - buyer beware. Unknown regulation method, assumed to be buck because of input voltage range. Driver chip is marked LEDA 0712. Three modes with memory; claimed high 1,200±100 mA, low 100±10 mA (bad flickering reported from very low speed PWM), fast strobe 650±50 mA. One reviewer mentioned the mode order is a crazy low, strobe, high. Output current may vary by battery voltage. Claims to provide different current outputs (1-1.2 A) to different Cree efficacy bins. I think NOT. |
|
TR-0022b-like, |
DealExtreme $2.99 |
Buck driver | 3.0-8.4 V | 1 | 1200 mA |
5 | 17 mm - two boards in double layer | Update June 2012: There may be a bad batch of these. They are reported here to eat LEDs. Unknown regulation method, assumed to be buck because of input voltage range. Spec claims 5 modes (presumably using PWM), with memory; claimed high 1200±100 mA, mid 550±50 mA, low 100±10 mA, fast strobe 650±50 mA, SOS 1,200±100 mA. However, one user has posted that with 4x AA NiMH the steady modes were high 700 mA, medium 300 mA, low 60 mA (insufficient voltage?). Claims to provide different current outputs (1-1.2 A) to different Cree efficacy bins. I think NOT. |
||
TR-0032 |
DealExtreme $2.19 |
Boost driver | 0.9-3.2 V (claimed 1.5-4.2 V) |
1 | ideal for 2x NOT suited for 3x NiMH or Li-ion |
77-89% | 630 mA Can be modified to 1000 mA |
1 | 17 mm | Constant current boost driver with either PAM2801 (max 350 mA) or PAM2803 (max 1000 mA) or J1JD (?) chip. Latest version outputs 630 mA; originally set to 380 mA. Claimed variable output current depending on input voltage, 600 mA (with 1.5 Vin) to 1.2 A (with 4.2 Vin), which makes me wonder what on Earth DX means by "Fully regulated circuit design"; those figures obviously aren't. However, testing by Hilarion showed perfectly stable current output from 1.2-3.2 V; very nice, although only 360 mA. Output current is determined by a sense resistor with 95±5 mV feedback voltage. Thus 0.25 Ω sense resistor as supplied in 2009 gives 380 mA, 0.15 Ω as presently supplied gives 630 mA,
0.1 Ω gives 950 mA (measured 900 mA at ~80% efficiency). Efficiency is said to drop horribly with input current > 2 A. As pointed out in this thread there are no components to buck voltage as implied, so it would actually be direct drive when Vin is greater than Vf of your LED. |
TR-0055C boost driver |
FastTech $4.95 |
Boost driver | 6.0-8.4 V | 5 | 2x Li-ion | 700 mA |
1 | 25 mm | See DX sku.26106 which is cheaper and has more support from knowledgeable customers. | |
TR-0055C, 15 W boost driver for 5x LEDs |
DealExtreme $4.12 |
Boost driver | 3.0-12.5 V (5-8.4 V claimed) |
2-6 | 2x Li-ion |
72-90% | 650 mA Can be modified to 2000 mA |
5 | 26 mm x 13 mm high | A boost board for up to 5 LEDs in series (so would be ideal for a well-heatsinked MC-E with the dice in series). Version 2, TR-0055C or TR-5055C: Has a slightly smaller inductor than the previous version and uses the FP5138 regulator chip. Output is set to 650 mA. Version 1, TR-0055 or TR-5055 or TR-0055a2 or TR-5055a2: Has a lovely big-looking inductor and uses the AS2001 regulator chip. 5 modes, with memory - high, medium (56%), low (26%), fast strobe, SOS. Test results here or here by EpRoM which includes a 30 minute test at 12.44 V. Voltage across sense resistor is 0.5 V. Tip 1: An investigation into eliminating the flashing modes is here (for single mode mod see post 11 and pic in post 13). Tip 2: Operation with >12 V input may need a resistor changed, and for running 6 LEDs the output capacitor may need to be changed - an analysis and discusssion is here. |
TR-0124 or TR-0163B, 5 mode SST-90 driver |
FastTech $8.46 |
Buck driver | 12-12 V | 1 | 5100 mA |
5 | 32 mm x 28 mm high - 2 perpendicular boards | Buyer beware - title says TR-0124, photo shows TR-0163B. 5 modes in Impractical Reverse Order; high, medium (2 A), low (800 mA), strobe, SOS. Polarity protection. Alternative source DX 50026. | ||
TR-0124B, 5 mode driver for Luminus SST-50 |
FastTech $6.43 |
Buck driver | 7.2-8.4 V | 1 | 2x Li-ion | 4000 mA |
5 | 26 mm x 26 mm high - two perpendicular boards | Five modes in Impractical Reverse Order, unknown memory; high (4 A), medium (2 A), low (0.8 A), strobe, SOS. Claimed to be 10 W input power but with a 4 A output current that's not going to be true with a white LED. | |
TR-0163B (SST-90 driver) |
DealExtreme $9.76 |
Buck driver | 3.6-12 V | 1 | 70% | 6500 mA |
5 | 35 mm diameter x 22 mm high - two boards in double layer | 5 mode with memory; high 6.5 A, medium 2 A, low 800 mA, fast strobe 5 A, SOS 6.5 A. Efficiency figure from review. Driver appearance has completely changed but model mentioned in specs has not changed. (Update April 2015: It now has.) Buyer beware. Alternative source Fasttech 1424817. Version 2: TR-0163B. Two green boards perpendicular to each other. Unknown if size has changed. Version 1: TR-0124-A. Double layer, red boards. |
|
TR-0166, 1A buck |
DealExtreme $4.20 |
Buck driver | 3.0-8.4 V | 1 | 1-2x Li-ion | 1000 mA |
3 | 17 mm | 3 mode with memory; high, low, strobe (8 Hz). Polarity protected. | |
TR-0192, 3 mode |
DealExtreme $3.32 |
Buck driver | 3.0-10.5 V (5-12 V claimed, but might be dangerous for driver & LEDs) |
3 | 4-7x NiMH 2x Li-ion |
83-91% | 800 mA |
3 | 20 mm x 17 mm high - two perpendicular boards | Update Jan 2016: It's a buck driver possibly using the QX9920 LED driver chip, not buck/boost as implied by the specs - buyer beware. Battery contact board is labelled TR-0192A and perpendicular board is labelled TR-0192B. The specs given for this driver imply that it'll output 10.8 V with anything from 5 V to 12 V input. This seems very doubtful at this price point - it would mean it was boost/buck. It's very likely boost only, and goes direct drive when the input voltage is greater than the output voltage; the output current is said to rise rapidly and it gets very hot. Updated version May 2013: About 20 mm high; two perpendicular boards. Upgraded switching FETs and much larger inductor. Old version: 14 mm high; two boards in double layer. Uses the FP5138 boost driver chip. 3 modes - claimed high 800±50 mA, low 200±20 mA, fast strobe 400±40 mA. However one reviewer has claimed the modes are high 900 mA, low 600 mA, strobe 600 mA, and another says they are now 750 mA on high (as of 12/2009). Mode memory switches to the next mode whenever turned on again. Apparently has a battery protection function which disables high mode when battery cannot supply enough current. Input current may be as high as 4 A at 5 V. The efficiency figure listed in this table is from a particular configuration in the driver chip datasheet. YMMV. Tip: The driver board is the top board (17 mm diameter, with the inductor on it) and can be separated from the lower board if only one mode is wanted. It has set resistors on its underside which can individually be changed to alter high and low modes. |
TR0067 |
DealExtreme $3.00 |
Boost driver | 1.0-3.0 V | 1 | 1-2x AA, 1x 123A |
63-68% | 700 mA |
5 | 16 mm - two boards in double layer | Boost board. Output voltage and current not constant; almost 300 mA from one fresh AA, almost 700 mA output with two fresh AAs. Modes are high, low, and three different flashing options! No mode memory. Tip: Remove controller board to use as single mode driver. |
TR0142B (SST-50 driver) |
DealExtreme $7.40 |
Buck driver | 8.4-8.4 V | 1 | 2x Li-ion | 4000 mA |
5 | 26 mm diameter x 22 mm high - two boards in double layer | 5 modes with memory; high 4 A, medium 2 A, low 800 mA, fast strobe 2.8 A, SOS 4 A. Incomplete specs for input voltage. | |
TRC02 B, RGB LED strip controller |
DealExtreme $27.70 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
4 | 125 mm x 47 mm x 26 mm | 3 channels, maximum 6 A per channel at 12 V, or 4 A per channel at 24 V. RF remote control. | |
TRC02(W), RGB LED strip controller |
DealExtreme $27.70 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
4 | 125 mm x 47 mm x 26 mm | 3 channels, maximum 6 A per channel at 12 V, or 4 A per channel at 24 V. RF remote control. | |
TRC05 B, RGB LED strip controller |
DealExtreme $25.70 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
4 | 90 mm x 70 mm x 27 mm | 3 channels, maximum 6 A per channel at 12 V, or 4 A per channel at 24 V. RF remote control. | |
TRC05 W, RGB LED strip controller |
DealExtreme $25.80 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 18 A |
4 | 90 mm x 70 mm x 25 mm | 3 channels, maximum 6 A per channel at 12 V, or 4 A per channel at 24 V. RF remote control. | |
TY-A6018RF, RGB LED dimmer |
DealExtreme $15.40 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 130 mm x 63 mm x 23 mm | 3 channel, maximum 4 A per channel. RF remote control. | |
TY-A628IR, RGB LED strip controller |
DealExtreme $6.90 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 55 mm x 35 mm x 22 mm | 3 channels, maximum 2 A per channel. IR remote control. | |
TY-A669IR, 9 channel RGB LED controller |
DealExtreme $10.00 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 13.5 A |
1 | 95 mm x 52 mm x 29 mm | 9 channels, maximum 1.5 A per channel. IR remote control. | |
TY-D300IR, 1 channel LED controller |
DealExtreme $7.50 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 6000 mA |
1 | 61 mm x 35 mm x 22 mm | ||
V10 |
LCK-LED $6.00 + shipping |
Linear regulator | 3.2-4.5 V | 1 | 3500 mA |
5 | 17 mm | Driver uses at least four AMC7135 chips on one of two back-to-back boards, and probably an ATtiny13 on the other board. Five modes - high (100%), medium (45%), low (10%), strobe, SOS. Claimed constant current, but the maximum output is variously listed as 3.0 A and 3.5 A, and test results listed show the output is definitely not constant over the voltage range tested (and has a high of 3.3 A). This calls into doubt the constant current claim for all drivers from this retailer. Buyer beware. See extra AMC7135 notes below. | ||
V10-136, 1xAA-1x3V Boost Driver, 3 mode |
Intl Outdoor Store $8.50 |
Boost driver | 0.9-3.7 V | 1 | 1-2x AA, 1x CR123A 1x LiFePO4 |
1000 mA |
3 | 17 mm x 11 mm high - two boards in double layer | Driver removed from site. Output current 600 mA with 1xAA, 1000 mA with 2xAA. Three modes; high, medium (30%), low (5%). PWM frequency 1 kHz. Flashing warnings for high temperature and low voltage (not stated if it warns at several low voltage levels). Bottom board (which is where the model number V10-136 comes from) apparently does nothing except provide a 17 mm board and can be removed to leave just a 15 mm single board boost driver with components on both sides. |
|
WF-(13-18)x1W-T |
DealExtreme $12.30 |
Mains driver | 180-240 V AC | 13-18 | 230 V AC mains power | 85% | 300 mA |
1 | 95 mm x 43 mm x 20 mm | Output voltage 39-63 V. Note that this voltage represents a shock hazard - use with caution. |
WF-(2-4)x1W-T |
DealExtreme $9.00 |
Mains driver | 180-265 V AC | 2-4 | 230 V AC mains power | 80% | 300 mA |
1 | 83 mm x 37 mm x 20 mm | Output voltage 6-16 V. Claims to be dimmable. |
WF-(5-7)x1W-T dimmable mains driver |
DealExtreme $9.90 |
Mains driver | 180-240 V AC | 5-7 | 230 V AC mains power | 83% | 300 mA |
1 | 84 mm x 36 mm x 20 mm | Output voltage 5-17 V. Claims to be dimmable. |
WF-(8-12)x1W-T dimmable mains driver |
DealExtreme $11.70 |
Mains driver | 180-240 V AC | 8-12 | 230 V AC mains power | 85% | 300 mA |
1 | 95 mm x 48 mm x 20 mm | Output voltage 24-42 V. Claims to be dimmable. |
WF-0565, 3W mains driver |
DealExtreme $5.30 |
Mains driver | 90-265 V AC | 1 | 115 V or 230 V AC mains power | 600 mA |
1 | 64 mm x 2.5 mm x 20 mm | Output voltage 2.5-5 V. Claimed water resistant, no IP rating given. | |
WF-108300 (25-30)x1W, 30W mains driver |
DealExtreme $19.70 |
Mains driver | 90-265 V AC | 25-30 | 115 V or 230 V AC mains power | 89% | 300 mA |
1 | 130 mm x 43 mm x 31 mm | Output voltage 75-105 V. Note that this voltage represents a shock hazard - use with caution. |
WF-10Sx3P, 30W mains driver |
DealExtreme $24.16 |
Mains driver | 90-265 V AC | 9-12 | 115 V or 230 V AC mains power | 85% | 900 mA |
1 | 133 mm x 43 mm x 32 mm | Output voltage 30-36 V. IP66 dust/water rating. |
WF-10Sx5P, 50W mains driver |
DealExtreme $31.30 |
Mains driver | 90-265 V AC | 9-12 | 115 V or 230 V AC mains power | 85% | 1500 mA |
1 | 143 mm x 43 mm x 32 mm | Output voltage 30-36 V. IP66 dust/water rating. |
WF-10Sx8P, 80W mains driver |
DealExtreme $56.10 |
Mains driver | 100-240 V AC | 9-13 | 115 V or 230 V AC mains power | 85% | 2200 mA |
1 | 157 mm x 71 mm x 44 mm | Output voltage 30-40 V. IP66 dust/water rating. |
WF-1230, (1-3)x1W mains driver |
DealExtreme $5.30 |
Mains driver | 85-265 V AC | 1-3 | 115 V or 230 V AC mains power | 300 mA |
1 | 70 mm x 25 mm x 16 mm | Output voltage 3.5-12 V. IP65(?) dust/water rating. | |
WF-12600, WF-(2-3)x3W |
DealExtreme $6.80 |
Mains driver | 90-265 V AC | 2-3 | 115 V or 230 V AC mains power | 600 mA |
1 | 76 mm x 30 mm x 20 mm | Output voltage 6-12 V. IP66 dust/water rating. | |
WF-2065, (3-5)x3W mains driver |
DealExtreme $8.80 |
Mains driver | 90-265 V AC | 3-5 | 115 V or 230 V AC mains power | 600 mA |
1 | 76 mm x 34 mm x 19 mm | Output voltage 12-20 V. IP66 dust/water rating. | |
WF-25300, (4-7)x1W mains driver |
DealExtreme $7.70 |
Mains driver | 90-265 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 76 mm x 30 mm x 20 mm | Output voltage 13-25 V. IP66 dust/water rating. | |
WF-3260, (6-9)x3W mains driver |
DealExtreme $12.30 |
Mains driver | 85-265 V AC | 6-9 | 115 V or 230 V AC mains power | 600 mA |
1 | 94 mm x 37 mm x 24 mm | Output voltage 21-32 V. IP66 dust/water rating. | |
WF-4230, (8-12)x1W mains driver |
DealExtreme $9.30 |
Mains driver | 90-265 V AC | 8-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 78 mm x 34 mm x 20 mm | Output voltage 24-42 V. IP66 dust/water rating. | |
WF-4230, WF-(8-12)x1W-X, 12W mains driver |
DealExtreme $8.70 |
Mains driver | 85-265 V AC | 8-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 90 mm x 25 mm x 20 mm | Output voltage 25-42 V. IP66 dust/water rating. | |
WF-4860, (9-12)x3W mains driver |
DealExtreme $15.60 |
Mains driver | 90-265 V AC | 9-12 | 115 V or 230 V AC mains power | 600 mA |
1 | 114 mm x 37 mm x 28 mm | Output voltage 26-45 V(?). IP66 dust/water rating. | |
WF-54600, (13-15)x3W mains driver |
DealExtreme $20.40 |
Mains driver | 90-265 V AC | 13-15 | 115Â V, 230Â V AC mains power | 89% | 600 mA |
1 | 142 mm x 42 mm x 31 mm | Output voltage 42-52.5 V. Note that this voltage represents a shock hazard - use with caution. IP66 dust/water rating. Removed from website. |
WF-5W-Q, 5W mains driver |
DealExtreme $4.90 |
Mains bulb driver | 100-240 V AC | 4-6 | 115 V or 230 V AC mains power | 300 mA |
1 | 42 mm x 22 mm x 16 mm | Output voltage 12-18 V. | |
WF-6330, (13-18)x1W mains driver |
DealExtreme $12.80 |
Mains driver | 85-265 V AC | 13-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 95 mm x 37 mm x 24 mm | Output voltage 45-63 V. IP66 dust/water rating. | |
WF-6330, WF-(13-18)x1W-X, 18W mains driver |
DealExtreme $11.50 |
Mains driver | 85-265 V AC | 13-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 107 mm x 30 mm x 20 mm | Output voltage 40-63 V. Note that this voltage represents a shock hazard - use with caution. IP66 dust/water rating. | |
WF-7W-Q, 7W mains driver |
DealExtreme $7.00 |
Mains bulb driver | 100-240 V AC | 5-8 | 115 V or 230 V AC mains power | 300 mA |
1 | 65 mm x 25 mm x 16 mm | Output voltage 16-23 V. | |
WF-8430, (19-24)x1W mains driver |
DealExtreme $15.80 |
Mains driver | 85-265 V AC | 19-24 | 115 V or 230 V AC mains power | 300 mA |
1 | 100 mm x 37 mm x 27 mm | Output voltage 66-84 V. IP66 dust/water rating. | |
WF-8430, WF-(19-24)x1W-X, 24W mains driver |
DealExtreme $13.30 |
Mains driver | 85-265 V AC | 19-24 | 115 V or 230 V AC mains power | 300 mA |
1 | 135 mm x 30 mm x 20 mm | Output voltage 60-84 V. Note that this voltage represents a shock hazard - use with caution. IP66 dust/water rating. | |
WF-9W-Q, 9W mains driver |
DealExtreme $7.70 |
Mains bulb driver | 100-240 V AC | 8-10 | 115 V or 230 V AC mains power. | 300 mA |
1 | 65 mm x 25 mm x 16 mm | Output voltage 25-33 V. | |
WF-S100 10Sx10P, 100W mains driver |
DealExtreme $65.60 |
Mains driver | 100-240 V AC | 9-13 | 115 V or 230 V AC mains power | 86% | 2900 mA |
1 | 210 mm x 71 mm x 44 mm | Output voltage 30-40 V. IP66 dust/water rating. |
WiFi LED repeater |
DealExtreme $20.81 |
User interface driver | 5.0-5.0 V | 1 | 5 V DC, USB |
|
1 | 90 mm x 66 mm x 15 mm | Single channel repeater; cellphone control using WiFi. Intended for 2.4 GHz LED bulb. | |
WiFi RGB LED dimmer |
DealExtreme $31.30 |
User interface driver | 7.5-24 V | 1-6 | 12 A |
1 | 85 mm x 45 mm x 25 mm | 3 channel, maximum 4 A per channel. WiFi control. | ||
WiFi RGB LED strip controller |
DealExtreme $68.56 |
User interface driver | 5.0-24 V | 1-6 | 5 V, 12 V, 24 V DC | 12 A |
1 | 127 mm x 66 mm x 32 mm | 3 channel, maximum 4 A per channel. RF remote control, or control over WiFi from iOS or Android device (comes with a CD). How cool is that? | |
Wonder-cuits |
litemania.org $8.00 + shipping |
Buck driver | 3.3-6.0 V | 1 | 1x Li-ion | 2000 mA |
1 | 17 mm | The whole site this driver was on has gone. Discussion here claims it does no current limiting other than PWM. Output current can be adjusted to one of 500 mA, 1 A, 1.5 A, 2 A by soldering/unsoldering four parallel set resistors. Specs claim it is "Most efficient when the LED's Vf is similiar to Input Voltage." I wonder who came up with the weirdo name. |
|
WY5412 |
DealExtreme $4.10 for 2 |
Step-down (non-buck) driver | 2.7-4.2 V | 1 | 1x Li-ion | 1200 mA |
1 | 16 mm | Five modes, cycling; high, medium (30%), low (5%), fast strobe (8 Hz), SOS. Probably not suitable for torch use due to non-standard supply contacts on back of board. Diameter stated to be 16.5 mm but dimension listed is 16.0 mm. Unknown regulation method. | |
WY6825 |
DealExtreme $4.40 |
Buck driver | 3.0-12 V | 1 | 2500 mA |
5 | 22 mm x 10 mm high | Five modes without memory; high, medium (50%), low (10%), fast strobe (8 Hz), SOS. Polarity protection. Unknown PWM frequency, eh! | ||
WY6890 adjustable driver with switch |
DealExtreme $4.10 |
Linear regulator | 2.8-4.5 V | 1 | 3x AAA, 1x Li-ion |
5 mA Can be modified to 1000 mA |
1 | 34 mm x 20 mm | Output current continuously adjustable from 5 mA to 1000 mA using on-board potentiometer. Unknown regulation method. Switch is momentary, turns driver on or off with each push. Stand-by current 10 µA. | |
WY6927 |
DealExtreme $4.80 |
Buck driver | 5.0-8.4 V | 1 | 2x Li-ion | 2000 mA |
3 | 22 mm | 3 mode without memory; high, low (20%), fast strobe (8 Hz). A momentary switch (included) cycles through modes. | |
X0812300, JR-(8-12)1W, mains driver |
DealExtreme $5.60 |
Mains driver | 85-265 V AC | 8-12 | 115 V or 230 V AC mains power | 85% | 300 mA |
1 | 65 mm x 65 mm x 25 mm | Output voltage 24-42 V. Open-circuit, short-circuit, over-voltage and over-current protection. Intended for ceiling mount lights. |
X1824300, JR-(18-24)x1W, mains driver |
DealExtreme $6.90 |
Mains driver | 85-265 V AC | 18-24 | 115 V or 230 V AC mains power | 300 mA |
1 | 65 mm x 65 mm x 25 mm | Output voltage 54-82 V. Note that this voltage represents a shock hazard - use with caution. Short-circuit, over-voltage and over-current protection. | |
XC-I0812A (8-12)*1W |
DealExtreme $38.30 |
Mains driver | 100-245 V AC | 8-12
12 LEDs included |
115 V or 230 V AC mains power | 300 mA |
1 | Output voltage 24-45 V. IP65 dust/water rating (hopefully shipped items won't be falling apart). Also see DX sku.70006. 12 warm white LEDs included (in an aluminium downlight). |
||
XH-3X1W, 3x1W mains driver |
DealExtreme $5.60 |
Mains driver | 85-265 V AC | 2-3 | 115 V or 230 V AC mains power | 300 mA |
1 | 60 mm x 25 mm x 20 mm | Output voltage 3-12 V. Description claims IP66 dust/water rating, but driver label does not mention it - buyer beware. | |
XHP50 driver |
FastTech $3.74 |
Step-down (non-buck) driver | 7.0-15 V | 2 | 2-4x Li-ion | 2300 mA |
1 | 22 mm | ||
XHP50 driver |
FastTech $2.55 |
Buck driver | 6.0-15 V | 2 | 2-4x Li-ion | 2400 mA |
1 | 22 mm | ||
XHP50 driver, 5 mode |
FastTech $3.74 |
Step-down (non-buck) driver | 7.0-15 V | 2 | 2-4x Li-ion | 2300 mA |
5 | 22 mm | 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. | |
XHP50 driver, 5 mode |
FastTech $2.55 |
Step-down (non-buck) driver | 6.0-15 V | 2 | 2-4x Li-ion | 2400 mA |
5 | 22 mm | 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. | |
XHP50 or XM-L driver, 5 mode |
FastTech $3.20 |
Step-down (non-buck) driver | 7.0-15 V | 2 | 2-4x Li-ion | 3000 mA |
5 | 22 mm | 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. A review says the actual output current is 2.5A. | |
XHP50 or XM-L driver, dimmable |
FastTech $3.20 |
Buck driver | 7.0-15 V | 2 | 2-4x Li-ion | 3000 mA |
1 | 22 mm | A review for the 5 mode version (FT 7492700) says the actual output current is 2.5A. Unknown if the driver is actually dimmable as claimed in the title. | |
XHP70 driver for Convoy FX-30 |
FastTech $9.19 |
Buck driver | 6.0-7.4 V | 2 | 5000 mA |
5 | 30 mm x 10 mm depth | Includes separate push button board (for changing modes?). Intended for the Convoy FX-30, which uses a Cree XHP70.2. 5 modes; low, medium, high, turbo, strobe. | ||
XHP70 driver for Convoy L6 |
FastTech $10.26 |
Buck driver | 6.0-8.4 V | 2 | 4000 mA |
1 | 22 mm x 6 mm depth | Includes separate push button board. Intended for the Convey L6, which depending on model uses a GT-FC40 or a Cree XHP70.2. | ||
XHP70 driver, 22mm, 5 mode |
FastTech $3.32 |
Buck driver | 8.0-15 V | 2 | 3-4x Li-ion | 3250 mA |
5 | 22 mm | 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. The single mode version (FT 7217201) is not 4 A output current as claimed. direct drive with 2x Li-ion. Efficiency of about 75%. | |
XHP70 driver, 22mm, CX-5322-D |
FastTech $3.32 |
Buck driver | 8.0-15 V | 2 | 3-4x Li-ion | 3250 mA |
1 | 22 mm | Not 4 A output current as claimed. Direct drive with 2x Li-ion, but output reasonably steady above ~8.0 V. Output flickers slightly when regulated output takes over from direct drive. Efficiency about 75%. | |
XHP70 driver, 26mm |
FastTech $4.49 |
Buck driver | 6.0-15 V | 2 | 2-4x Li-ion | 4500 mA |
1 | 26 mm | Claimed 4.5A output current but one user reported an output current of 3.5A but doesn't say what conditions that was measured under. Another user suggested the output current might be input voltage dependent. | |
XHP70 driver, 26mm, 5 mode |
FastTech $6.03 |
Buck driver | 6.0-15 V | 2 | 2-4x Li-ion | 4000 mA |
5 | 26 mm | Output current is stated to be 4.0-4.5 A. 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. Incomplete specs provided, so actual output voltage range unknown. |
|
XHP70 driver, 26mm, 5 mode |
FastTech $4.43 |
Buck driver | 6.0-15 V | 0 | 2-4x Li-ion | 4000 mA |
5 | 26 mm | 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. | |
XHP70 driver, 26mm, 5 mode |
FastTech $4.49 |
Buck driver | 6.0-15 V | 2 | 2-4x Li-ion | 4500 mA |
5 | 26 mm | 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. Claimed 4.5A output current but the single mode version (7217101) has some forum comments indicating the output current is only about 3.5A. | |
XHP70 driver, 26mm, LED-130923C, dimmable |
FastTech $5.43 |
Buck driver | 6.0-15 V | 2 | 2-4x Li-ion | 4000 mA |
1 | 26 mm | Output current is stated to be 4.0-4.5 A. Incomplete specs provided, so actual output voltage range unknown. Unknown if the driver is actually dimmable as claimed in the title. |
|
XHP70 driver, 32mm, 5 mode |
FastTech $8.53 |
Buck driver | 6.0-15 V | 2 | 2-4x Li-ion | 4000 mA |
5 | 32 mm | Output current is stated to be 4.0-4.5 A. 5 modes in Impractical Reverse Order; high, medium, low, strobe, SOS. Incomplete specs provided, so actual output voltage range unknown. |
|
Xitanium 12Â W |
LED Supply $27.99 + shipping |
Mains driver | 108-132 V AC | 1-8 | 115 V AC mains power | 80% | 350 mA |
1 | 132 mm x 30 mm x 22 mm | Output voltage 2.6-32.8 V, maximum output power 12.0 W. |
Xitanium 17Â W |
LED Supply $27.99 + shipping |
Mains driver | 108-132 V AC | 3-6 | 115 V AC mains power | 80% | 700 mA |
1 | 132 mm x 30 mm x 22 mm | Output voltage 7.8-24.6 V, maximum output power 17.2 W. |
Xitanium 25Â W dimmable |
LED Supply $84.65 + shipping |
Mains driver | 108-132 V AC | 3-6 | 115 V AC mains power | 80% | 1050 mA |
1 | 83 mm x 77 mm x 34 mm | Output voltage 7.8-24.6 V, maximum output power 25.5 W. Â A non-dimmable version with this output is also available, as is a 230 V AC dimming version. |
Xitanium 40Â W |
LED Supply $58.42 + shipping |
Mains driver | 108-132 V AC | 3-6 | 115 V AC mains power | 1750 mA |
1 | 85 mm x 77 mm x 34 mm | Output voltage 7.8-24.6 V, maximum output power 40 W. | |
XLZM-RGB-V01, RGB driver |
DealExtreme $5.00 for 2 |
Buck driver | 4.5-4.5 V | 1 |
|
1 | 30 mm | Buyer beware. Apparently intended for RGB (3x1W) LEDs but only the cathode solder pad for the green LED has solder on it. Many important details lacking. Appears to have an IR sensor. | ||
XM-L driver |
CN Quality Goods $7.00 + shipping |
Buck driver | 6.0-8.4 V | 1 | 2x Li-ion | 2800 mA |
1 | 26 mm | 3 mode; high, low, strobe | |
XM-L driver |
CN Quality Goods $6.00 + shipping |
Step-down (non-buck) driver | 2.7-8.4 V | 1 | 1-2x Li-ion | 2800 mA |
1 | 22 mm | 3 modes; high, low, strobe. Polarity protection. | |
XM-L Multi-cell Circuit Board |
Intl Outdoor Store $9.95 |
Buck driver | 5.5-12.6 V | 1-3 | 2-3x Li-ion | 3000 mA |
3 | 21 mm x 15 mm high | Driver removed from site. Three modes; high, medium (30%), low (5%). PWM rate 3.9 kHz. Thermal protection, low voltage protection; flashes to indicate both of these. |
|
XY-G-TH01A, RGB LED strip controller |
DealExtreme $23.30 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 89 mm x 70 mm x 27 mm | Three channel, maximum 4 A per channel. RF remote control. | |
XY-G-TH03A, RGB LED strip controller |
DealExtreme $23.40 |
User interface driver | 12-24 V | 1-6 | 12 V or 24 V DC | 12 A |
1 | 129 mm x 64 mm x 24 mm | Three channel, maximum 4 A per channel. RF remote control. | |
XYX-100WLP mains driver |
DealExtreme $31.99 |
Mains driver | 85-277 V AC | 7-11 | 115Â V, 230Â V AC mains power | 3000 mA |
1 | 142 mm x 69 mm x 38 mm | Output voltage 18-36 V. IP67 dust/water rating. | |
XYX-150WLP mains driver |
DealExtreme $54.11 |
Mains driver | 85-277 V AC | 7-11 | 115Â V, 230Â V AC mains power | 4500 mA |
1 | 157 mm x 85 mm x 40 mm | Output voltage 18-36 V. IP67 dust/water rating. | |
XYX-200WLP, 200W mains driver |
DealExtreme $66.07 |
Mains driver | 85-277 V AC | 7-12 | 115Â V, 230Â V AC mains power | 6000 mA |
1 | 256 mm x 69 mm x 38 mm | Output voltage 18-36 V. IP67 dust/water rating. | |
XYX-80WLP mains driver |
DealExtreme $28.27 |
Mains driver | 85-277 V AC | 7-11 | 115Â V, 230Â V AC mains power | 2200 mA |
1 | 152 mm x 52 mm x 39 mm | Output voltage 18-36 V. IP67 dust/water rating. | |
YCX-04L, 2A 5 mode driver |
DealExtreme $5.41 |
Buck driver | 2.9-8.4 V | 1 | 1-2x Li-ion | 2000 mA |
5 | 17 mm (two boards) | 5 mode with memory; high, medium, low, fast strobe, SOS. Low voltage warning, low voltage protection. | |
YF-1-3X1W, (1-3)x1W |
DealExtreme $5.15 |
Mains driver | 85-277 V AC | 1-4 | 115Â V, 230Â V AC mains power | 88% | 300 mA |
1 | 60 mm x 30 mm x 23 mm | Output voltage 2-13 V. IP67 dust/water rating. |
YF-100W, 10S10P mains driver |
DealExtreme $37.13 |
Mains driver | 85-277 V AC | 7-13 | 115Â V, 230Â V AC mains power | 88% | 3000 mA |
1 | 183 mm x 70 mm x 45 mm | Output voltage 25-45 V. IP67 dust/water rating. |
YF-12-16X1W, (12-16)x1W mains driver |
DealExtreme $7.99 |
Mains driver | 85-277 V AC | 12-16 | 115Â V, 230Â V AC mains power | 88% | 300 mA |
1 | 93 mm x 30 mm x 23 mm | Output voltage 36-60 V. Note that this voltage represents a shock hazard - use with caution. IP67 dust/water rating. |
YF-3-5X3W, (3-5)x3W mains driver |
DealExtreme $6.65 |
Mains driver | 85-277 V AC | 4-5 | 115Â V, 230Â V AC mains power | 88% | 600 mA |
1 | 78 mm x 30 mm x 23 mm | Output voltage 12-18 V. IP67 dust/water rating. |
YF-30W, 10S3P mains driver |
DealExtreme $13.94 |
Mains driver | 85-277 V AC | 6-12 | 115Â V, 230Â V AC mains power | 88% | 900 mA |
1 | 100 mm x 38 mm x 28 mm | Output voltage 21-40 V. IP67 dust/water rating. |
YF-70W, 10S7P main driver |
DealExtreme $30.99 |
Mains driver | 85-277 V AC | 6-11 | 115Â V, 230Â V AC mains power | 88% | 2100 mA |
1 | 160 mm x 53 mm x 40 mm | Output voltage 20-38 V. IP67 dust/water rating. |
YH-8902 strobe controller |
FastTech $4.28 |
User interface driver | 12-12 V | 1-3 | 12 V DC |
|
3 | 82 mm x 35 mm x 22 mm | Controller alternates between 2 channels; maximum 10 W per channel. | |
YH-8902 strobe controller |
DealExtreme $4.98 |
User interface driver | 12-12 V | 1-3 | 12 V DC |
|
3 | 82 mm x 35 mm x 22 mm | Controller alternates between 2 channels; maximum 10 W per channel. Available elsewhere for less; FT 1957200. | |
YH-A15, 9-15*1W mains driver |
Focalprice $6.93 |
Mains driver | 100-240 V AC | 9-15 | 115 V or 230 V AC mains power | 73% | 320 mA |
1 | 80 mm x 32 mm x 18 mm | Output voltage 28-60 V. Note that this voltage represents a shock hazard - use with caution. |
YML 1-3X1W |
DealExtreme $4.78 |
Mains driver | 85-265 V AC | 1-3
1 LED included |
115Â V, 230Â V AC mains power | 300 mA |
1 | 35 mm x 35 mm x 20 mm | Output current is a guess; driver claims 1 W, specification claims 1.5 W. 1 warm white LED included (in an aluminium cabinet lamp). |
|
YRHIR005, LED Dimmer with 12-Key IR Remote Controller |
DealExtreme $13.30 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 8 A |
1 | 86 mm x 86 mm x 39 mm | Presumed to provide PWM dimming for 12 V DC LED lamps, thus does no current limiting itself. Maximum 96 W power handling. IR remote control. | |
YRHRF005, LED Single Color Dimmer with Remote Controller |
DealExtreme $11.10 |
User interface driver | 12-12 V | 1-3 | 12 V DC | 8 A |
1 | 110 mm x 56 mm x 34 mm | Presumed to provide PWM dimming for 12 V DC LED lamps, thus does no current limiting itself. Maximum 96 W power handling. RF remote control. | |
YW-1012, 2 channel (10-12)x2W mains driver |
DealExtreme $35.90 |
Mains driver | 170-250 V AC | 8-12 | 230 V AC mains power | 1200 mA |
1 | 115 mm diameter x 37 mm high | Output voltage 24-40 V. Two channel, intended for controlling colour temperature, apparently 600 mA each. RF remote control. | |
YW-2430, (3-7)*1W dimmable mains driver |
DealExtreme $10.94 |
Mains driver | 175-260 V AC | 3-7 | 230 V AC mains power | 300 mA |
1 | 100 mm x 40 mm x 25 mm | Output voltage 9-24 V. | |
YW-4030, (12-18)*1W dimmable mains driver |
DealExtreme $11.80 |
Mains driver | 200-240 V AC | 12-18 | 230 V AC mains power | 300 mA |
1 | 115 mm x 45 mm x 30 mm | Output voltage 40-60 V. Note that this voltage represents a shock hazard - use with caution. | |
YW-4080, (7-12)*2.5W dimmable mains driver |
DealExtreme $16.49 |
Mains driver | 180-240 V AC | 7-12 | 230 V AC mains power | 800 mA |
1 | 103 mm x 68 mm x 30 mm | Output voltage 20-40 V. | |
YW-4230, (8-12)*1W dimmable mains driver |
DealExtreme $10.94 |
Mains driver | 175-260 V AC | 8-12 | 230 V AC mains power | 300 mA |
1 | 100 mm x 40 mm x 25 mm | Output voltage 21-42 V. | |
YW-4290 dimmable mains driver |
DealExtreme $19.69 |
Mains driver | 200-240 V AC | 7-12 | 230 V AC mains power | 900 mA |
1 | 164 mm x 46 mm x 32 mm | Output voltage 21-42 V. Dimmable range 1-100 % | |
YW-8907, (4-7)x1W mains driver |
DealExtreme $6.19 |
Mains driver | 100-265 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 85 mm x 35 mm x 20 mm | Output voltage 12-28 V. | |
YW-8912, (8-12)x1W mains driver |
DealExtreme $8.28 |
Mains driver | 100-265 V AC | 8-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 95 mm x 44 mm x 20 mm | Output voltage 24-48 V. | |
YW-8912, (8-12)x1W mains driver |
DealExtreme $7.87 |
Mains driver | 110-265 V AC | 8-12 | 115 V or 230 V AC mains power | 85% | 300 mA |
1 | 83 mm x 30 mm x 21 mm | Output voltage 30-48 V. IP66 dust/water rating. |
YW-8918, (13-18)x2W mains driver |
DealExtreme $9.56 |
Mains driver | 100-265 V AC | 13-18 | 115 V or 230 V AC mains power | 450 mA |
1 | 110 mm x 45 mm x 25 mm | Output voltage 24-48 V. | |
YW-8940, 10S4P mains driver |
DealExtreme $13.21 |
Mains driver | 100-265 V AC | 9-12 | 115 V or 230 V AC mains power | 1200 mA |
1 | 110 mm x 46 mm x 28 mm | Output voltage 24-42 V. | |
YW11030, (28~30)*1W, dimmable mains driver |
DealExtreme $16.24 |
Mains driver | 175-240 V AC | 28-30 | 230 V AC mains power | 300 mA |
1 | 120 mm x 45 mm x 28 mm | Output voltage 85~110 V. Note that this voltage represents a shock hazard - use with caution. | |
YW86260, 36W dimmable mains driver |
DealExtreme $19.35 |
Mains driver | 175-260 V AC | 15-20 | 230 V AC mains power | 600 mA |
1 | 165 mm x 45 mm x 30 mm | Output voltage 42-62 V. Note that this voltage represents a shock hazard - use with caution. Dimmable. Removed from website. | |
Zetex C310 Buck Driver, 8 mode |
DealExtreme $7.35 for two pack |
Buck driver | 3.7-8.4 V | 1 | 3-6x NiMH, 1-2x Li-ion | 1000 mA |
8 | 20 mm | Buck regulator based on Zetex C310 chip and PWM for modes. Output 800-1000 mA on high. Modes 100%, 50%, 30%, 20%, 10%, SOS, strobe, fade in & out (one of very few to have that). With 4x NiMH cells the ability to select modes is lost about when the cells need to be recharged. No reverse polarity protection. | |
ZF(12-18)x1W-C-S mains driver |
DealExtreme $10.40 |
Mains driver | 100-265 V AC | 12-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 140 mm x 45 mm x 27 mm | Output voltage 30-70 V. Note that this voltage represents a shock hazard - use with caution. | |
ZF(9-12)x1W-C-S mains driver |
DealExtreme $7.96 |
Mains driver | 100-265 V AC | 9-12 | 115 V or 230 V AC mains power | 300 mA |
1 | 115 mm x 44 mm x 25 mm | Output voltage 30-45 V. | |
ZF0103-5A, (1-3)x1W mains driver |
DealExtreme $3.00 |
Mains driver | 85-265 V AC | 1-3 | 115 V or 230 V AC mains power | 300 mA |
1 | 54 mm x 28 mm x 23 mm | Output voltage 3-12 V. | |
ZF0406-03, (4-6)x3W mains driver |
DealExtreme $6.44 |
Mains driver | 85-265 V AC | 4-6 | 115 V or 230 V AC mains power | 600 mA |
1 | 88 mm x 38 mm x 22 mm | Output voltage 10-24 V. | |
ZF0507-5B, (5-7)x1W mains driver |
DealExtreme $4.98 |
Mains driver | 85-265 V AC | 5-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 68 mm x 32 mm x 20 mm | Output voltage 15-25 V. | |
ZF0809-3-5B |
DealExtreme $7.87 |
Mains driver | 85-265 V AC | 6-9 | 115 V or 230 V AC mains power | 600 mA |
1 | 110 mm x 41 mm x 24 mm | Output voltage 15-36 V. | |
ZF1318-5B, (13-18)x1W mains driver |
DealExtreme $8.32 |
Mains driver | 85-265 V AC | 13-18 | 115 V or 230 V AC mains power | 300 mA |
1 | 110 mm x 40 mm x 25 mm | Output voltage 35-70 V. Note that this voltage represents a shock hazard - use with caution. | |
ZF1924-5B, (19-24)x1W mains driver |
DealExtreme $10.94 |
Mains driver | 85-265 V AC | 19-24 | 115 V or 230 V AC mains power | 300 mA |
1 | 110 mm x 40 mm x 25 mm | Output voltage 50-90 V. Note that this voltage represents a shock hazard - use with caution. | |
ZF4D7W-C-S, 7W mains driver |
DealExtreme $4.60 |
Mains driver | 100-265 V AC | 4-7 | 115 V or 230 V AC mains power | 300 mA |
1 | 80 mm x 32 mm x 22 mm | Output voltage 10-30 V. | |
ZPC-0101L-B, 1x3W |
DealExtreme $5.00 |
Mains driver | 90-265 V AC | 1 | 115 V or 230 V AC mains power | 90% | 650 mA |
1 | 50 mm x 30 mm x 22 mm | Output voltage 2.2-5 V. Claimed minimum efficiency listed here. IP67 dust/water rating. |
ZPC-0103L-A, (1-3)x1W |
DealExtreme $5.00 |
Mains driver | 85-265 V AC | 1-3 | 115 V or 230 V AC mains power | 90% | 320 mA |
1 | 50 mm x 30 mm x 22 mm | Output voltage 2.5-12V. Claimed minimum efficiency listed here. IP67 dust/water rating. |
ZY-1010B, 100W mains driver |
DealExtreme $17.99 |
Mains driver | 85-265 V AC | 10-12 | 115Â V, 230Â V AC mains power | 3000 mA |
1 | 105 mm x 69 mm x 40 mm | Intended for 10x10 LED arrays. Output voltage 30-36 V. | |
ZY1010B - 100W LED mains driver |
DealExtreme $15.96 |
Mains driver | 85-165 V AC | 10-12 | 115Â V, 230Â V AC mains power | 3000 mA |
1 | 105 mm x 48 mm x 31 mm |
Notes
Footnotes & Instructions
|
Notes on AMC7135 linear regulator (click to expand/contract)
The AMC7135 (datasheet) is a linear regulator, which means it acts like a variable resistor changing its value to try to keep the current constant. Like a resistor, any dropped voltage is burnt off as heat. Boards include a polarity protection diode and can easily be PWM-driven for lower modes.
Vin must be at least 0.12 V above Vf of LED to stay in regulation, although they drop out of regulation quite gracefully, not suddenly. The graph in the AMC7135 datasheet (Jan 2006) has the 0.1 and 1 volt vertical lines missing. Each AMC7135 provides constant current, about 1/3 amp (actually 300-380 mA depending on particular version; I've generally assumed 330-335 mA for above listings). Boards come with one to eight AMC7135s, and single mode up to 20 mode. Boards can be paralleled to give greater output, or connected with one multimode board controller providing the modes for several boards.
The AMC7135 is very efficient when input voltage is close to output voltage but not particularly good when input voltage is significantly higher. Average efficiency for 3x NiMH or 1x Li-ion can be well over 90% with an LED with the right Vf. Test results and discussion for 3 and 4 chip boards.
Since the AMC7135 just burns off excess input volts as heat, the more volts fed into them the hotter they'll get. One guy claimed that his got so hot they slid right off the board (ie, >183-190 °C melting range of 60/40 solder). The AMC7135 has built-in thermal protection (which will cause dropouts or a flickering effect if it gets too hot) but the multi-mode control chips used on the multi-mode boards are much less rugged. (And here.) If using with an input voltage above 4.5 V or so you can expect them to get hot!
To get multiple modes typical microcontrollers used are the Atmel ATtiny13 (or 13A or 13V) and the Microchip PIC12F629. These both have a 5.5 V maximum, while the AMC7135 linear regulator has a 6.0 V maximum. This means that multimode drivers will have a slighty lower maximum voltage than single mode boards.
Tip 1: To get reliable operation at low voltages, especially with only one AMC7135 chip being used, you may need to short out (and maybe remove) the polarity protection diode(s)*. This is because the AMC7135 in series with a polarity protection diode needs a minimum 2.7 V + 0.6 V (silicon diode) = 3.3 V to stay in regulation. The Vf of LEDs at 330-350 mA can easily be quite a bit lower than 3.3 V so will not be running in regulation. Note that if a germanium or Schottky diode was used the drop could be as low as 0.3 V instead of 0.6 V.
* However, I found with one multimode board this caused the board to go unstable (don't know exactly why) but I found that inserting a small value resistor instead of the diode was enough to get the driver stable again. Because the drive current through that point in the circuit is so low (6 mA for mine) there's very little voltage drop across the resistor - much less than across the diode - so it still serves the purpose of saving ~0.6 V.
Tip 2: If the input voltage is too high you may be able to use another LED in series with the board to drop the voltage - it beats burning it all off as heat. (The set current is <1 mA for single mode boards so both LEDs will get practically identical current. Diagrams and much discussion of use with multiple Seoul P7s and multi-mode boards.) More than one extra LED appears to be not a good idea for use with the lower modes of multi-mode boards since the Vf of the extra LEDs decreases too much at the low current to protect the driver from the battery voltage. (Many of the multi-mode boards have a capacitor on the output.) Flashing modes appear unsuited to this technique.
AMC7135-based driver options are discussed here, or an inexpensive multimode AMC7135 driver here.
Notes on PT4105 and alternative driver chips (PT4115, AX2002, CL6807) (click to expand/contract)
PT4105 (datasheet):
Production of this driver IC - as used in the Kennan and MR16 base drivers described above - has been terminated. The manufacturer doesn't even have a publicly displayed link to the datasheet any more, which is the weirdest part of it. This from Micro Bridge (now removed from their site; try to ignore the punctuation and spacing):
The PT4105 which the manufacture has already officially stopped producing,and the subsequent instead item is the PT4115,AX2002 and FP6101 Also,The PT4115,AX2002 and FP6101 has superior performance over ,wider input range and more current than the PT4105.
PT4115 (datasheet):
While I look forward to the PT4115 being available in low cost LED drivers (by its numbering the apparent successor to the PT4105), I note that it needs an input of at least 8 V (and has under voltage lock out at 6.8 V), so isn't nearly as well suited to low voltage torches as the PT4105 was. It will, however, have its uses for 3x Li-ion torches and automotive purposes. The chip has a DIM pin which gives it the ability to very easily be dimmed. Efficiency is about 80-82% for 1 LED, up to 93% for 3 LEDs, and apparently up to 98% for 7 LEDs. Maximum output current 1.2 A.
AX2002 (datasheet):
This driver chip from AXElite looks extremely interesting. It will accept a minimum 3.6 V input and has a maximum switched current of 2.5 A, although it tends to overheat at more than 2 A. It includes thermal protection (140°C), over current protection, short circuit protection, and has a PWM control circuit. Its efficiency is good too, with an output of 2 A @ 5 V it's an impressive 91% efficient (with 12 V input). Driving a Cree XR-E at 1 amp will give an efficiency of about 87-88% (with 12 V input). Efficiency is not quite as good at low currents with a single LED, dropping under 80%.
AX2002 drivers can also easily be configured as a constant voltage power supply. The load is connected straight to ground and the 0.25 V reference voltage is used to control a voltage divider with a couple of moderately high value resistors to give a fixed multiple of 0.25V at VOUT.
For example, for 5 V, 5 = 20 * 0.25, so a 10 kΩ resistor is placed between ground and FB (the feedback pin), and a 190 kΩ resistor between FB and VOUT (making the total of those resistors between VOUT and ground of 200 kΩ).
When used in this way, to give stability the current through the resistors probably just needs to be comfortably greater than the feedback pin bias current of (0.1 µA typical, 0.5 µA maximum). If two exact resistor values for the voltage divider are not available it's easiest to use a single resistor for the sense resistor (between ground and FB), while the other value (between FB and VOUT) uses two resistors in series or parallel. For series, one of those two resistors will be as close as possible to the desired value, and just under it, while the other will be a much smaller resistor to tweak the total resistance up for the output voltage wanted. For parallel, the main resistor is just over the actual value wanted while the other resistor with about ten times the resistance tweaks the total resistance down. If that resistor is getting into megaohms you should probably revise your values.
Some AX2002 drivers (
such as DX 3256sadly no longer an AX2002 driver) come with a 1 A Schottky diode, which will need to be changed if increasing the output current over 1 A. See the Schottky diode notes below for links.AX2003 (datasheet):
The AX2002 also has a big brother, the AX2003, which has a maximum switched current specification of 4 amps – easily enough to drive a Seoul P7, or a Cree MC-E with the dice in parallel. No drivers with the AX2003 are presently known. The spec sheets of the AX chips could do with a few more graphs showing how constant the output current is, etc.
FP6101 (datasheet): Not an LED driver.
CL6807 (datasheet):
Chinese LED driver, 1 A maximum output current, 6-35 V input, 0.1 V high side sense voltage. Claims to be able to provide up to 35 W output power. Dimmable with 0.5-2.5 V PWM signal.
So there are some nice driver chip options, but it still leaves a gap of a high efficiency, really low voltage, low current driver.
Notes on Schottky diodes (click to expand/contract)
Schottky diodes are diodes that have a low voltage drop across them. 0.3 V is a typical figure, compared to around 0.60-0.65 V for a typical silicon diode. This makes Schottky diodes good for rectifiers and LED drivers where high efficiency is required. Drivers that use the AX2002 such as DX 3256 can easily be modified for higher output current but the Schottky diode needs to be replaced if the output current is to exceed 1 A.
Inexpensive Schottky diodes are available from these sources:
- These MR16 drivers have four 1 A (SS14) Schottky diodes on them used for the rectifier plus another for the driver (links jump to driver info in table above):
- SR260 60V 2A Schottky Diodes Set (10 pcs).
- Common Use Axial Schottky / Fast Recovery / Fast Switching / Rectifier Diodes (220 piece pack):
- 20 x 1N4001 Rectifier diodes
- 20 x 1N4004 Rectifier diodes
- 20 x 1N5399 Rectifier diodes
- 20 x 1N4007 Rectifier diodes
- 50 x 1N4148 Fast switching diodes
- 10 x 1N5408 Rectifier diodes
- 20 x 1N5819 Schottky barrier diodes
- 10 x 1N5822 Schottky barrier diodes
- 20 x FR107 Fast recovery diodes
- 20 x FR104 Fast recovery diodes
- 10 x FR207 Fast recovery diodes
- 1N5822 3 Amps 40V Schottky Barrier Rectifier Diodes 20-pack (if you want to risk that site).
Celebrating the
independent kiwi spirit of invention.
Contact:
Return to ianman HOME | Back
to Aqualab Home | Return
to TOP
Inventions: Super
Soaker Backpack | Air
Cannon | Car
Interior Lighting | LED
Torch
* This would have been an ad. |
When you buy stuff from Asian sellers: |
| Please don't buy stuff from a country in the middle of intimidating its neighbours. | |